登录 | 免费注册 | 提交网站 | 免费看询盘 | 外贸旺站免费建站 | "贸易通"多语言推广 | 外贸论坛
Hot Products:
Home > Laboratory Thermostatic Devices >

12 L Walk In Constant Temperature And Humidity Chamber With Korea Imported Thermostat

12 L Walk In Constant Temperature And Humidity Chamber With Korea Imported Thermostat

Brand Name: KOMEG
Certification: CE/ROHS/FCC/
Model Number: KMHW-12R(Walk-in Chamber)
Minimum Order Quantity: 1Set
Delivery Time: 30 working days after received your payment30 work days upon deposit
Payment Terms: L/C, T/T, Western Union, MoneyGram, D/P
KOMEG Technology Ind Co., Limited
Verified Supplier
Dongguan Guangdong China
Business type: Manufacturer Exporter
Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, 523808, Guangdong Province, P.R.China
Supplier`s last login times: within 36 hours


12 L Walk In Constant Temperature And Humidity Chamber With Korea Imported Thermostat


A KOMEG Walk-In Chamber serves as a test site for large components, assemblies, and finished


products in electrical and electronics, aerospace, batteries and automobiles, etc. KOMEG manufactures


both Static Walk-In Chambers and Dynamic Walk-In Chambers and can be configured as a temperature


chamber or a temperature humidity chamber.


The KMHW-Series walk-in temperature and climate test chambers are especially developed for large test


specimens. Size and design are optimal loading of test specimens. The modular construction and


variability in size and equipment is ideally for specific application.

.


Features


● GB-2423.1-2008 (IEC68-2-1) Test A: Low Temperature Test


● GB-2423.2-2008 (IEC68-2-2) Test B: High Temperature Test


● GJB360. 8-87(MIL-STD. 202F) High Temperature Life Test


● GBJl50. 3(MIL-STD-810D) High Temperature Test


● GJBl50. 4(MIL-STD-810D) Low Temperature Test


● GB2423. 3-93(IEC68-2-3)Test Ca: Constant Heat Test


● GB2423. 4-93(IEC68-2—30)Test Db: Damp Heat Alternative Test


● GJBl50. 9-93(MIL-STD-810D) Damp Heat Test


Specifications


IV. Main Technical Parameters

(Performance: Air-cooled, Room temperature +25°C, no load)

1.Temperature range+27℃ ~ +35℃
2. Temp. Deviation≦±2.0℃
3.Temp.Fluctuation±0.5℃
4. Temp.Uniformity≦2.0℃
5. Humidity range40%~90%RH
6.Temperature and humidity range

7.Humidity deviation

±3.0%RH(>75%RH)

±5.0%RH(≤75%RH)

8.Humidity Uniformity±3.0%RH(no-load)
9.Humidity fluctuation±2.0%RH
10. Air exchange rateThe amount of air per hour is about 1 or 2 times.
11.Cleanliness levelCleanliness level ISO 5 (Use environmental cleanliness level :ISO 6)
Temperature and humidity performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in the air outlet.
. Chamber Structure (on-site installation)
1. Chamber size

Workspace volume: W 2500 × H 2000 × D 2500 mm

Exterior size: W 3600 × H 2050 × D 2600 mm (not including the machine protruding part)

2. Insulation box

wall material: high-quality carbon steel with static color spray

inner wall material: SUS304 # matte stainless steel plate

Insulation material: 50mm rigid polyurethane foam insulation + glass fiber. (5 surface insulation, no floor)

3. DoorDouble door, Door size W900*H1900 mm, including window (Specific size, Depending on design).
4. Lighting device4 moisture-proof incandescent lamps.
5.Electric control boxTotal power circuit breaker, over-temperature protection.
6.Pressure balanceThe test chamber has a pressure balance port 1 to prevent the pressure in the chamber from being too high.
7. Control methodForced circulation ventilation, Balanced thermostat conditioning (BTHC).
8. HeatingHigh-quality nickel-chromium alloy wire heater, non-contact control mode (SSR).
9. HumidifyingStainless steel corrosion resistance heat evaporation humidification.
10.Pure water machinePure water machine type 1, please provide 1 ~ 2kg/cm2 tap water source.
11.Humidity SensorElectronic humidity sensor, no need to replace the wet cloth.
12.Condensate outletEquipped with studio condensate and unit condensate drain holes.
13.High efficiency filterHEPA * 1, High efficiency 99.99%
14.Ventilation fanHigh static pressure ventilation fan *1(New air inlet with medium HEPA *1, High efficiency 85%)
15.Differential pressure gaugDifferential pressure gaug 0 – 50 mmH2O *1

Product details



Packaging:


Chambers are covered with air bubble film before put them into the strong plywoodcase, which not only


has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic,


odorless, moisture corrosion, crash-proof, etc



After-sales Service and Training


Charge-free warranty will last for 1 year from the date of equipment acceptance. After the warranty


period, the user will be charged properly. Irregular examination and life-long service are available;


Note: If needed, provide 2 operators for on-site installation and training


Company introduction:


Since 1990, manufacturers of custom environmental chambers and standard environmental chambers,


Specializing in environmental simulation equipment, ess, walk-in, environmental stress screening, altitude


chambers, temperature chambers, temperature and humidity chambers, environmental test chamber


manufacturers, humidity chambers, humidity simulation, temperature cycling, thermal test chambers, solar


panel test chambers, thermal shock, climatic/climate chambers, vibration test chambers, drive-in


chambers, laboratory test chambers, environment test rooms.



Product Tags:

walk in environmental chamber

      

walk in humidity chamber

      

12 L Walk In Constant Temperature And Humidity Chamber With Korea Imported Thermostat Images

Send your message to this supplier
From:
Enter your email please.
To: KOMEG Technology Ind Co., Limited
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
Other about

12 L Walk In Constant Temperature And Humidity Chamber With Korea Imported Thermostat