Add to Cart
Car Obd2 code scanner bluetooth hands free Fm trnasmitter music player
OBD2 Auto Scanner and Car OBD Music Player 2 IN 1 FM transmitter Car Bluetooth Mp3 Player Supports TF Card
Product description:
This is a type of OBD Bluetooth music player for cars, equipping with double mode Bluetooth 4.0, supporting OBD 9 standard protocols (J1850, KWP, CAN), with low power consumption function. This product is also equipped with Bluetooth MP3 player and FM transmitter, supporting SD card. Can play the audio files conveyed from the memory and mobile Bluetooth, and transmit to the car FM receiver by FM wireless transmitter, and then transfer to the audio to play.
2.Function characteristics:
1.Classic appearance, smart size, applied to most of car models.
2.Supporting Bluetooth 4.0/3. 0/2. 0 device connection, with voice
prompt accompanying the operation.
3.Supporting FM full frequency transmission, have 206 frequency
points in total.
4.Supporting digital display.
5.Supporting external TF card, MP3/WMA music format, achieve
switching play among the folders.
6.Supporting Bluetooth stereo A2DP music play.
7.Supporting 0BDII function, can connect I0S, Android and other
systems of mobiles.
8.Automatically enter low power consumption, awakening mode
3. Bluetooth name:
This product achieves audio transmission and data transmission in
the meanwhile, with two Bluetooth names.
Name 1: OBD Audio, for Android audio transmission, data
transmission and ios audio transmission.
Name 2: OBDII, for i0S data transmission
Data transmission and audio transmission are available after
finished the connection.
4. Operation instruction
5). OBDII connection
Android users: Open Bluetooth to connect 0BD
Audio, open the test software to test after connected successfully
i0S users: Open Bluetooth to connect 0BDII, open the test software
to test after connected successfully
Users can make the test by the third party software
Android: APP: Torque is recommended
i0S: APP:car scanner, OBD Auto Doctor are recommended
6). Low power consumption/Awakening mode
Disconnect Bluetooth, car shuts down, enter to low power consumption mode after 3 minutes. Car starts (when the rotation speed of engine is larger 300rpm by the detection), the product is awakened.
5 Attentions
1.Avoid the product falls down that causes the surface or a whole
unit get damaged.
2.Please use the voltage[DC9-36V]as specified by this equipment, or
else it will let the product gets abnormal or damaged.
3.This equipment has the built-in FM transmission antenna, keep it
away from the local strong signal of station frequency point to get
the better tone quality effect.
4.Try to avoid transmitting the audio signal and car body data in
the meanwhile, it may cause data transmission gets abnormal.
Supported vehicle data:
Speed
Fuel pressure
Air flow speed
Fuel system status
Fuel system status
Coolant temperature
Calculated load value
Intake air temperature
Injection advance time
Long-term fuel situation
Short-term fuel situation
intake manifold pressure
Throttle absolute position
Read the error diagnosis code
Fuel consumption monitoring, etc
Engine revolutions per minute (RPM)
Clear the fault code (clear the error code and turn off MIL)
Oxygen detection voltage associated with short-term fuel condition
Technical Parameters:
Bit rate: 64-320kbps
Master chip: binding chip
Working current: 50-60MA
Launch distance: <5 meters
Working voltage: DC 12~24V
Support TF card: capacity ≤ 32G
Dimensions: 49.0*26.0*39.9 mm
Support file type: MP3/WMA/WAV
Low power consumption: 11-18MA
Storage temperature: -40 to 80 ° C
Operating environment: -20 ~ 65 ° C
Signal to noise ratio: 85DB [FM: 65DB]
Harmonic distortion: <0.05% [FM <0.1%]
FM frequency range: 87.5-108MHZ<100KHZ stepping>