0.45mm PU Coated Fiberglass Fabric Cloth For Welding Spatter Sparks Protection

0.45mm PU Coated Fiberglass Fabric Cloth For Welding Spatter Sparks Protection

PU(Polyurethane) coated fiber glass fabric is a woven fiberglass cloth substrate which has been coated on one side or both two sides with a specially compounded grey polyurethane coating. Mass per unit of this PU coated glass fabric is 460g/m2. Base cloth is satin(cross twill) weave 3732 fabric. It is 430g/m2 and 0.43mm thick. When coated with 15g/m2 grey PU coating each side, totally weight per unit can be 460gsm, and thickness will be 0.45mm.

One special property of PU coated fiberglass cloth is, usually common coated fiberglass fabric like silicone or PTFE coated fabric should be used below 260℃. While PU coating is able to resisting instantaneous temperature up to 1100 degree Celsius. So it is very suitable materials for welding sparks/spatter shield, good for fire/welding blanket/curtain. Coated fiberglass fabric also have some special properties like chemical corrosion resistance, electrical insulation, high strength, no itchy, rich colors.

Properties:

1. 15g/m2 PU coating on both sides
2. Pu coating can bear 1100℃ instantaneously
3. Resist most acids, Chemical corrosion resistance
4. Waterproofing (it is washable)
5. Heat resistant, resist high temperature below 260℃

Application:

• Welding Spatter Shield
• Fire Curtain, Fire Doors
• Fabric Air Distribution Ducts
• Ductwork Connector
• Thermal Insulation Jacket/Exhaust Blanket
• Fire/Smoke Control Systems

Fiberglass are also available in blended and coated choices. Blended fibers fabric are manufactured from a mixture of two or more different kinds of fibers. However coated fiberglass products can be improved or sized glass fibers. There are silicone/pvc/PFTE/pu coatings that offers different special needs.

Data Sheet Of Base Cloth 3732:

Satin Weave:

The eight harness satin is similar to the four harness satin except that one filling yarn floats over seven warp yarns and under one. This is a very pliable weave and is used for forming over curved surfaces.

3732 fiberglass fabric is a widely used basic cloth for coating. It is always used for fire blanket because of its suitbale thickness. When coatded with PU coating, because PU coating can resist 1100℃ for a short time, this PU coated 3732 fabric is very suitable for fire blanket and welding blanket for fire, welding sparks/spatters protection.

Picture:

Unionfull® Group Ltd is a quality environment friendly (ISO - 9001 & 2008) modern, hi-tech enterprise specialized in manufacturing of Thermal Materials and Heat Resistant Materials, such as Fiberglass Fabric, Silica Cloth, Silicone coated Fiberglass Fabric, Needle Mat and so on. Unionfull Group Ltd,. China Thermal Products supplier provides a comprehensive range of products including:

1) Fiberglass Fabric

2) Thermal Insulation Materials

3) High Silica Fabric

4) Silicone Coated Fiberglass Fabric

5) Fiberglass Needle Mat

6) Glass Roving

7) Fiberglass Fire Blanket

8) Welding Blanket

Our products are used by some of the very well known industrial houses in the Petrochemical, Power, Cement, Steel, Chemical, Pharmaceutical, Gas and Process Industry.
We heavily export our products to different companies / industrial houses in the UK, US, Europe, Australia, Africa and the Middle East.

Unionfull Group Ltd is your premier supplier of industrial thermal insulating, welding and cutting protection and safety products.

Tel: +86-573-89601588-

Fax: 4008266163-8807

Phone:+86-18668332131

Whatsapp:+8618668332131