DN800 150PSI PN10 Disc Butterfly Check Valve Fusion Bonded Epoxy Ductile Iron

• TYPE: BI-ECCENTRIC
• PRESSURE CLASS: 150PSI
• END: FLANGED
• FLANGE: ASME B16-5
• NOMINAL DIAMETER: 16 POL
• FLUID: WATER
• BODY MATERIAL: CAST IRON ASTM A 536 GR 65-45-12
• STEMMATERIAL: STAINLESS STEEL AISI410
• SEAL MATERIAL: TEFLON
• DISC MATERIAL: STAINLESS STEEL A 743 CF8M
• SEAT MATERIAL: STAINLESS STEEL 316
• INTERNAL FINISH: EPOXI
• EXTERNAL FINISH: EPOXY / POLYURETHANE
• THICKNESS INTERNAL FINISH: 150 MICRONS
• THICKNESS EXTERNAL FINISH: 250 MICRONS
• COLOR: GREEN RAL 6019
• CONSTRUCTION STANDARD: AWWA C-504
• DRIVE: ELECTRIC ACTUATOR
• COUPLING ACTUATOR: ISO 5211
• CONTROL PANEL: N / A
• MANUAL: PRINTED PORTUGUESE
• WARRANTY: 12 MONTHS

Specifications:

Size: DN50 - 3000
Temperature: -15℃ - 150℃
Pressure: 1.0MPa/1.6MPa

Materials
Materials of Body : Ductile Iron (GGG40, GGG50). Cast Iron (GG25), Stainless Steel

Materials of Disc : Stainless Steel. Nickel Plated, Ductile Iron, Ductile Iron Coated Plastic,

Titanium Steel, Copper Alloy etc

Materials of Seat : Ethylene-Propylene-Diene Monomer (EPDM), Polytetrafluoroethylene (PTFE),

Nitrile Rubber (NBR), Chloroprene, Chlorosulfonated Polyethylene (Hypalon),

Silicon, Fluoroelastomer (VITON) , Caoutchouc etc.

Materials of Stem : Stainless Steel. Carbon Steel ,2Cr13

A butterfly valve is a type of flow control device, typically used to regulate a fluid flowing through a section of pipe.
The valve is similar in operation to a ball valve. A flat circular plate is positioned in the center of the pipe.
The plate has a rod through it connected to an actuator on the outside of the valve. Rotating the actuator turns the
plate either parallel or perpendicular to the flow. Unlike a ball valve, the plate is always present within the flow,
therefore a pressure drop is always induced in the flow regardless of valve position.

Brief introduction:

Double eccentric end flanged resilient sealing butterfly valve is operated by the disc rotating form

0° to 90°, can be applied to cut off or regulate the flow of medium.

Vitreous enamel is available upon request.

The valve can be actuated by operating lever, handle wheel, electric actuator or pneumatic actuator.

Widely used for potable water supply and distribution, electric power plant, gas supply, warm-air system,

smelting plant, chemical industry.

Features:

⊙ Professional design

When initiating the rotary opening movement the disc is off-seated after only a few

degree of opening movement and there is very little wear and tear between seat ring and disc.

⊙ Combine fastness

Stainless steel seat ring is rolled into the valve body by applying special rolling technology

when DN<1200. Ultrasonic spray applies seal of valve body when DN>1400.

⊙ Adjust tightness

Rubber sealing ring and disc can adjust tightness or softness of sealing with clamping ring, it insures

best performance of adjusting the compression of sealing.

⊙ Sealing reliable

Body and disc made of ductile iron which promote the impact resistance and pressure-bearing

capacity, sealing ring made of rubber and valve seat’s sealing surface is conical shaped, make the

sealing capacity more reliable.

⊙ Excellent corrosion protection

Inside electrostatic epoxy resin power coating or vitreous enamel(upon request), outside electrostatic

epoxy resin power coating.

⊙ Reliable health nature

Epoxy resin power is up to the health standard.

Mail part & material

Body, Disc: GGG50 with internal and external epoxy resin coating

Stems: 1Cr17Ni12Mo2Ti, Stainless steel min.13%Cr

Bushing :Bronze CuAI10Fe3

Seal ring, O-ring: NBR, EPDM or FPM

Technical Specification

- Nominal diameter:150～2600mm

- Nominal pressure:1.0/1.6/2.5Mpa
- Strength testing pressure:1.5/2.4/3.75Mpa

- Sealing testing pressure:1.1/1.76/2.75Mpa

Executive standard

Main external and connection dimension

1.0MPa mm

1.6MPa mm

2.5MPa mm

1. BRIEF INTRODUCTION:

The butterfly valve is operated by the disc rotating form 0° to 90°, can be applied to cut off or regulate

the flow of medium.

The valve can be actuated by operating lever, handle wheel electric actuator or pneumatic actuator.

Widely used for potable water supply, waste water treatment, electric power plant, gas supply,

warm-air system, smelting plant, ship building, textile, petroleum, chemistry, or other light industries.

2. Specification

3. FEATURES

⊙ EPDM seated, good seal

⊙ Low weight

⊙ Low flow resistance

⊙ Small operation torque

⊙ Easy to install and maintain

⊙ Open-close 90° more smoothly

4. APPLICABLE STANDARDS

1. Design according : API 609

2. Test standard according: JIS B2003

3. Connect flange standard according: JIS B2212

4. Face to face standard according: JIS B2002

5. Item Name of part Material Spec

6. Operation:

6.1. The two pipe flange should be smooth.

6.2. Put the butterfly valve in the pipe line, fixed the orientation hole first.

7. Delivery:

When delivery or store the butterfly valve, should keep in dry and cool environment.

8. Note:

8.1. Pipe flange should same as the butterfly valve flange.

8.2. Check the valve before installed, the environment should correspond to the butterfly valve

specification.

8.3. Before open butterfly valve, checking the disc without dirt.

8.4. The disc must be shut off place when installed.

8.5. Adjusting the pipe connect before installed.

8.6. The connect flange should be parallel.

8.7. After installed, the pressure test disc should be open place.

8.8. If the butterfly can not natural open or close, please kindly check it careful, can not strike, tamp or

use extension lever.

8.9. When maintenance or operation, must check the stem, lever, gear box or actuator have correctly

connect. Otherwise the stem will be push by pipe pressure.

9. The malfunction and resolving:

10. Maintenance

Open the worm box cover and add some butter per two months.

Check the seal, packing and flange, if leak, please maintain ASAP.

Wafer Rubber Seated Butterfly Valves

Product Advantages:

1) Small in size and light in weight and maintaince.
It can be mounted whereever needed.

2) Simple, compact structure, quick 90 degree on-off operation.

3) Disc has two-way bearing, perfect seal, without leakage under
the pressure test.

4) Flow curve tending to straight-line. Excellent regulation performance.

5) Various kinds of materials, applicable to different medium.

KCM TECHNOLOGY GROUP CO.,LTD
Address: Bin Hai Economic Development Industrial Zone.
WenZhou,ZheJiang Province,China

Tel :+0086-577-86879200
Fax :+86-577-86918728
Phone :+86 13175600492
Skype :Andy YOU 229
Web:www.kcmtech-valve.com&www.andy-valve.com
Email:admin@kcmtech-valve.com&sales@andy-valve.com
Main products:Cast steel(iron) gate check globe ball valve,strainer(API600)
Forged steel gate,globe,positionswing check valve(API602)
Forged steel ball valve,SS gate glove check ball valve(API603)
Stainless steel Camlock&grooved couplings,screwed fittings
-----------------------------------------------------------------------

Whether your needs call for standard or custom valves, KCM Valve provides excellence in service and delivery.

KCM TECH GROUP.was consisted by nine factories.We concentrate in developing,designing,processing ball valve,gete valve,check valve,globe valve,strainer.Also we help our customer develop special valve according to the project usage.Our valves have been widely used in water treatment,chemical industry,oil and petroleum,power plant,marine,sugar industry and other industries fields.To supply correct products to customers long time has resulted in efficency and performance gains.Our management system has been award ISO 9001,DNV,API certificate...

We have been paid all our energy into offering complete service,shortening delivery time,keep steady quality...

Mainly our customer are stock-seller,project manager.So we deeply understand the importance of good and steady quality,precise and fast delivery time,correct products,We always pey much energy to monitor whether our products design meet customers'request;whether our product department can produce the orders in time.We keep giving feedback to customers every time.

High efficiency communication make customers trust us.For so many years,we keep support our customers on many projects.It's our target.