Submersible Pump Centrifugal Pump Vertical Pipeline Centrifugal
This series pump that are suitable for environmental requirements
quiet place, at the same time, we can provide hot water pump,
chemical pump, explosion-proof oil pump, explosion-proof chemical
pump and so on many kinds of types.
The pipeline pump series include 4 series:
1. SLGD low speed vertical pipeline booster pump
2. SLWD low speed Horizontal pipeline booster pump
3. SLG vertical Pipleline booster Pump
4. SLW horizontal pipeline booster pump.
1.Water supply in industry,cities and high-rise
2.Fire fighting pipeline pressurizing
3.Cold and hot water circulation in air-condition
4.Transport water from far away
5.Pressurizing transport in industrial circulating system, and all
kinds of water supply equipments, boiler etc.
Pipeline pump working conditions:
1. Pump pressure of system work less than 1.6MPa, namely the
pressure of suction inlet plus the head of pump less than 1.6MPa,
when ordering, please indicate the system work pressure. when the
import pressure is greater than 0.4MPa, or pump system work
pressure is greater than 1.6MPa, shall be told us when you place
the order, so that in the manufacturing, pump flow part and
connections have made of copper materials.
2. Applicable medium: pure water without Corrosive liquid, Medium
solid not content, volume not more than the unit volume 0.01%,
particle size<0.2mm,if there is a small grain medium, please
tell us in ordering.
3. The ambient temperature no more than 40 degrees, relative
humidity not more than 95%.
1. This series of pumps are vertical structure and same diameter
size of inlet and exit opening. The inlet and exit opening are in
the same center line, and they are installed in the road tube just
like valve. The appearance is compact and beautiful, floor space is
small and construction cost is low. If protective cover is
equipped, pump can work in the open.
2. Impeller is installed straightly on the lengthening shaft of
electric motor. The axial dimension is very short, structure is
compact and configuration of pump and motor is reasonable, which
can balance efficiently the radial and axial load of the pump. So
that pump can run stably.
3. Shaft seal is adopted mechanic seal or mechanic seal group,
which is adopted imported titanium alloy sealing ring, medium sized
high temperature resistant mechanic seal, and cemented carbide
material wear-resistant seal. They can extend the service life of
4. Convenient installation and maintain. It doesn’t need to
dismantle pipeline system. As long as dismantling the nut of pump
connecting base, all rotor components will be dismantled.
5. Multiple operation or series operation can be selected according
to the demand of pump head and flow quantity.
6. Horizontal installation or vertical installation can be selected
according to requirement of piping layout.
Performance s Parameters f of , SLG, , SLRG, , SLHG, , SLYG, SLHBG