High speed roller Ironer (650 Series)

Super roller ironer(650 Series)

National initiative 3 national patent, PINGAN insurance

1.High speed-The fastest speed can be up to 60meters per minute

2.Low energy consumption---the steam consumption of sheet is about 390kgs per hour, the electricity consumption is about 3 degree per hour.

3.High efficiency---Working with CLM feeder and fast folding machine , can iron the max qty of sheet is 1200pcs/hour, and the bed cover is 850pcs.

6 reasons of high speed:

Reason of high speed 1: Adopt high quality boiler carbon steel with better performance of heat conduction. The heat conductivity of boiler carbon steel is 2.5times than stainless steel.

Reason of high speed 2:The thickness of roller is 10-11mm, and can bear pressure 1mpa steam pressure, which ensure safety operation and big heating storage cylinder wall guarantees the heating balance and ironing flatness of linen.

Reason of high speed 3:Heavy structure design, both sides of cabinet up to 12mm thickness. The whole machine is 11tons. It is processed by imported CNC laser cutting machine and assures the strength and precision.

Reason of high speed 4:All structure and cabinet adopt heavy design.Cylinder and all types of roller adopt precision machining that assures the ironing speed up to 55m per minute.

Reason of high speed 5:At the entrance of roller there are 4 pieces of flexible hold-down rollers, which can take 30% moisture out of the linen.

Reason of high speed 6:270 degree linen contact with roller, adopting two sides ironing design improves the working efficiency and lower cost. Especially improving the ironing quality of quilt cover.

The design of energy saving:

1.The motor power of whole machine is only 4.4KW, and adopt the frequency conversion design.

2.The two sides of rollers, the surrounding area of cabinet and all steam pipes had been constructed to keep the warn, the steam consumption is down by 5%.

3.Computer control and programmable design, accordingly to the working of ironing machine, freely set the ironing machine’s steam supply time when pre-heating, working, mid-rest, off duty. Adopt the effective management of steam use, can reduce the steam consumptions effectively. Compared the common ironing machine, the steam consumption is reduced nearly to 25%.

Safety design:

1.The roller is made of boiler carbon steel, the pressure resistance is better than stainless steel.

2.The thickness of roller is 10-11mm, and the design of bear pressure is 1.5mpa , test pressure is 1.2mpa, the max working pressure is 1mpa, Safe and realiable.

3.The relief valve is designed at the entrance of total steam inlets, as long as the supply of steam pressure is more than 1mpa, the control system is into work. Automatically shut down the steam supply of whole machine, until the steam pressure returned normal.

High quality flatness design

1.The surface of all rollers are grinded and processed , high finish, which effectively improve the ironing quality of cloth.

2.Three sets of rollers are all designed double-sides ironing ,which effectively ensure the ironing quality.

3.Partial rollers adopt “ no small guide belt “design, eliminate the marks of small guide belt, improve the flatness quality.

4. All ironing belts have tension function, which automatically adjust the tensions of belt, improve the ironing quality.

The stability design:

1.Heavy structure design, and the whole machine is 11tons.

2.All guide rollers are high precision special steel pipe processed by fine machining, which effectively ensure the ironing quality, avoiding guide belt slant.

3.The main components of main electric appliance, pneumatic components, transmission parts, ironing belts all all high-quality imported.

The main technical parameters of high speed roller ironer

Terui is a intelligent manufacturing enterprises, which specialized in industrial washer system, high speed ironer line, logistics sling system and series products research&development, manufacturing,sales,the integrated planning of wisdom laundry and supplied all line products .

Shanghai Terui was founded in 2001. After 18 years developments, now the total registered capital of Terui enterprise is RMB 70 million, the total floor space is 50000 square meters ,and the total building area is 30000 square meters.

Terui R&D team has 25 technical staffs, including mechanical, electrical&air, and software engineering, set up over 20 sales and service department around the country, the products were exported to Europe, north America, Africa, southeast Asia and more than 50 countries and regions.

Terui has total 200 sets of the most advanced processing equipment and testing equipment. The sheetmetal equipment included: CNC laser cutting machine and numerical control turret punch press imported from Japan, Numerical bending machine, numerical flame control cutting machine and 500 tons of hydraulic press etc. The machine equipment included: Large radial drill, numerical machine tool, numerical sawing machine and large lath etc. Moreover also owning the most advanced environmental protection coating line in domestic industry.

Since 2001, Terui has been strictly regulated by ISO9001 quality system in the process of products design, manufacturing and service. Advancing processing equipment,strict standard production management, quality management, personnel management has laid a good foundation for product quality and steady development of enterprise.

Quality, Brand, Integrity of Terui people will continue to pursue: professional, focused,concentrate on the business enterprise principle of management. Taking high grade, effective products and loyalty professional service spirit to feedback customers and society. Look forward to the future, Terui people will make progress and create a better tomorrow together with customers.