China Categories
English
Home /Terminals /

1.0mm pitch FI-X gold-flash crimp terminals with phosphor bronze material for AWG30# to 34#

1.0mm pitch FI-X gold-flash crimp terminals with phosphor bronze material for AWG30# to 34#

Brand Name:HRT
Certification:ISO9001/ ISO14001/UL/RoHS/REACH
Model Number:A1006-GPE
Minimum Order Quantity:100K PCS
Delivery Time:5 to 8 working days after payment checked
Payment Terms:TT, Western Union, PayPal, L/C
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China
Supplier`s last login times: within 24 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

5.08mm ptich wire to wire and wire to board Crimp Terminal,#18 - #24 AWG,gold plating terminals C5080M-T-A


1, The specification of the product including basic size information, electrical and mechanical properties.


Basic size information
Termination Interface StyleCrimp
Processing methodsE-stamping before Gold-flash
Insulation O.D.0.60mm(Max)
Part No.A1006-GPE
ApplicationSignal, PCB board
Electrical properties
Current Rating1A AC, DC
Voltage Rating200V AC, DC
Contact Resistance40mΩ Max
Insulation Resistance100MΩ min
Withstanding Voltage500V AC/minute
Mechanical properties
Temperature range-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report


The following pictures are engineering drawing and testing report for your reference, wish these can help you to purchase the ideal and right parts from us. Thank you!




1. Scope

This specification covers the requirements for product performance of 1.00mm pitch wire to board

connectors series.


2. Construction,Dimensions,Material & Plating

See the attached drawings


3. Ratings & Applicable Wires


ItemStandard
Rated Voltage (Max.)200V AC/DCInsulation O.D. 0.60mm (Max.)
Rated Current (Max.) And Applicable WiresAWG#301A AC/DC
AWG#320.8A AC/DC
AWG#340.5A AC/DC
Ambient Temperature Range-25℃ ~ +85℃*

*: Including terminal temperature rise


4. Electrical Performance


Test DescriptionProcedureRequirement
4-1

Contact Resistance


Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)35mΩ (Max.)
4-2Insulation ResistanceMate connectors, apply 200V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)100MΩ (Min.)
4-3Dielectric Withstanding VoltageMate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)No Breakdown.
4-4Contact Resistance on Crimped PortionCrimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.5mΩ (Max.)

5. Mechanical Performance


Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#300.8kgf (Min)
AWG#320.5kgf (Min)
AWG#340.3kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.0.50kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.0.50kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute0.40kgf (Min.)
5-6DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 80mΩ (Max.)
5-7Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 80mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-8Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)


6. Environmental Performance And Others


Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 80mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 80mΩ (Max.)

Insulation Resistance 10MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 80mΩ (Max.)

6-6Salt SprayTin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt Initial
Insertion (Max.)Withdrawal (Min.)
202.600.60
304.000.76


3, Benefits you can get

MOQ: If have stock, according to the smallest package. If not, according to the produce MOQ.


R&D ability:ODM&OEM is avaiable. We also can help you design molds and produce products.


Delivery time:3 to 8 days according to your order amount.


Quality Control: Original connector or replace connector we'll be 100% inspected before dispatching.


Package:PE Bag or Nylon Bag with Carton or according to you


Company Type : Factory and trade integration more than 12-years connector mold design and produce experience.

China 1.0mm pitch FI-X gold-flash crimp terminals with phosphor bronze material for AWG30# to 34# supplier

1.0mm pitch FI-X gold-flash crimp terminals with phosphor bronze material for AWG30# to 34#

Inquiry Cart 0