China Categories
English
Home /Terminals /

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

Brand Name:HRT
Certification:ISO9001/ ISO14001/UL/RoHS/REACH
Model Number:C4255M-T
Minimum Order Quantity:75K PCS
Delivery Time:5 to 8 working days after payment checked
Payment Terms:TT, Western Union, PayPal, L/C
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China
Supplier`s last login times: within 24 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

4.20mm Pitch Board To Wire Connectors , Crimp Style Connectors C4255M-T


1, The specification of the product including basic size information, electrical and mechanical properties.


Basic size information
Termination Interface Stylecrimp or compression
Processing methodsE-stamping before tin-plated
Insulation O.D.3.10mm(Max)
Part No.C4255M-TPE or C4255M-TPE-H or C4255M-TPE-TH
Applicationsignal
Electrical properties
Current Rating9A AC, DC
Voltage Rating600V AC, DC
Contact Resistance10mΩ Max
Insulation Resistance1000mΩ min
Withstanding Voltage1500V AC/minute
Mechanical properties
Temperature range-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report


The following pictures are engineering drawing and testing report for your reference, wish these can help you to purchase the ideal and right parts from us. Thank you!


1. Scope

This specification covers the requirements for product performance of 4.20mm pitch wire to board

& wire to wire connectors series.


2. Construction,Dimensions,Material & Plating

See the attached drawings


3. Ratings & Applicable Wires

ItemStandard
Rated Voltage (Max.)600V AC/DCInsulation O.D. 3.10mm (Max.)
Rated Current (Max.) And Applicable WiresAWG#146A AC/DC
AWG#16
AWG#18
AWG#205A AC/DC
AWG#224A AC/DC
AWG#243A AC/DC
Ambient Temperature Range-25℃ ~ +85℃*

*: Including terminal temperature rise


4. Electrical Performance


Test DescriptionProcedureRequirement
4-1

Contact Resistance


Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)10mΩ (Max.)
4-2Insulation ResistanceMate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)1000MΩ (Min.)
4-3Dielectric Withstanding VoltageMate connectors, apply 1500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)No Breakdown.
4-4Contact Resistance on Crimped PortionCrimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.), 10mA.5mΩ (Max.)

5. Mechanical Performance


Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#1411.0kgf (Min)
AWG#1610.0kgf (Min)
AWG#189.0kgf (Min)
AWG#206.0kgf (Min)
AWG#224.0kgf (Min)
AWG#243.0kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.1.50kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.3.00kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute3.00kgf (Min.)
5-6Latch Yield Strength

Mate connectors and pull apart until both latches break at the speed rate of

25±3mm / minute

7.0kgf (Min.)
5-7Panel Mount Retention ForceInsert the housing into panel cut out, push housing opposite the way it was assembled until the locking barbs break at the speed rate of 25±3mm / minute.16.0kgf (Min.)
5-8DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 20mΩ (Max.)
5-9Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-10Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JISC0041/MIL-STD-202 Method 213B Cond. A)


6. Environmental Performance And Others


Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

Insulation Resistance 100MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

6-6Salt SprayTin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10Resistance to Soldering Heat

Solder pot method

Soldering time: 10±0.5 sec.

Solder Temperature: 260±5℃

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt InitialCircuitsAt Initial
Insertion (Max.)Withdrawal (Min.)Insertion (Max.)Withdrawal (Min.)
Single0.700.20107.002.80
021.400.50117.703.05
032.100.75128.403.30
042.801.10149.803.90
053.501.351611.204.40
064.201.601812.605.00
074.901.902014.005.60
085.602.202215.406.10
096.302.502416.806.70



3, FAQ


Q:Do you allow multiple design per setup?
A:Yes.We accept OEM/ODM service and allow multiple design per setup.

Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed country, delivery by Fed x/UPS/DHL is normally 2-3 days(excluding weekends).

Q: How is the goods packaged ?
A: Usually in PE bads, tube, pipe and with outside carton box.


4, we can offer multiple, safe and fast shippment for you!


We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.

China 4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals supplier

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

Inquiry Cart 0