Home /Terminal Blocks /

PA66 material 1.25mm pitch wire to board connector without locking structure

PA66 material 1.25mm pitch wire to board connector without locking structure

Brand Name:HRT
Certification:ISO9001/ ISO14001/UL/RoHS/REACH
Model Number:A1250H-NP
Minimum Order Quantity:5000 pcs
Delivery Time:5 to 8 working days after payment checked
Payment Terms:TT, Western Union, PayPal, L/C
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China
Supplier`s last login times: within 24 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

1, The specification details table


Basic size information
Suitable terminalsA1250M series
CategoryCrimp housings
MaterialPA66/PBT
FlammabilityUL94V-0
Lock to mating partNone
Panel mountNo
Circuits2 to 16pins
Wire insulation diameter0.90mm Max.
Electrical properties
Current Rating1A AC, DC
Voltage Rating125V AC, DC
Contact Resistance20mΩ Max
Insulation Resistance100mΩ min
Withstanding Voltage500V AC/minute
Mechanical properties
Temperature range-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report

Folllowing pictures are out testing report and exact engineering drawing for your information, please kindly check it, wish it can help you to get what you really need.



5. Mechanical Performance


Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#281.0kgf (Min)
AWG#300.8kgf (Min)
AWG#320.5kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.0.50kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.0.50kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute0.50kgf (Min.)
5-6DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 40mΩ (Max.)
5-7Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-8Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)


6. Environmental Performance And Others


Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

Insulation Resistance 10MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

6-6Salt SprayTin-plated 16 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10

Resistance to Soldering Heat

(DIP)

Solder pot method

Soldering time: 10±0.5 sec.

Solder Temperature: 260±5℃

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.
6-11Resistance to Soldering Heat (SMT)

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt InitialCircuitsAt Initial
Insertion (Max.)Withdrawal (Min.)Insertion (Max.)Withdrawal (Min.)
022.000.28116.500.62
032.500.30127.000.65
043.000.33137.500.68
053.500.38148.000.71
064.000.43158.500.74
074.500.48169.000.77
085.000.53179.500.80
095.500.561810.000.83
106.000.59


3, Application fied of these product

You can have a direct cognition from the attached picture about its' application. This product are widely used in household appliance, computer, communication device. Because we establish a strict quality inspection system, so our products are trusted by international renown company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, BYD etc. And the all products are certificated by REACH, UL, RoHS. In order to protect the evironment, some parts are halogen free.


China PA66 material 1.25mm pitch wire to board connector without locking structure supplier

PA66 material 1.25mm pitch wire to board connector without locking structure

Inquiry Cart 0