Add to Cart
4-20mA isolated amplifier IC Selection Example:
Example 1: Signal input:0-5V;signal output: 0-5V; power
supply:5VDC; Model:JSD OI-V1-P4-VO4
Example 2:Signal input:4-20mA;signal output :4-20mA;power
supply:24VDC;Model:JSD OI-I4-P1-IO1
Example 3:Signal input:4-20mA;signal output :0-10VDC;power
supply:24VDC;Model:JSD OI-I4-P1-VO5
4-20mA isolated amplifier IC Features:
◆ Low cost,small size,SIP package with UL94-V0 flame retardant
standard
◆ Achieve Zero and gain adjustment by Adding multi-turn
potentiometer
◆ Three-port isolation (input, output and power supply)
◆ Isolation voltage (2500VDC/60s)
◆ Power supply:5VDC,12VDC,15VDC,24VDC
◆ 0~5V/0~10V/1~5V/0-100mV/0~20mA/0~10mA/4~20mA etc. voltage or
current signal conversion amplification
◆ High accuracy:(0.1% F.S,0.2% F.S);
◆ Full scale high linearity (non-linearity<0.1%)
◆ Strong anti-interference and Anti-high-frequency signal
interference
◆ Wide operation temperature (-45~+85℃)
◆ Passed CE Certificate
4-20mA isolated amplifier IC Applications:
◆ DC current/voltage signal isolation, conversion and amplification
◆ Analog signal ground interference suppression
◆ 4~20mA/0~20mA/0~10mA/0~5V/0~10V/1~5V etc. signal isolation and
conversion, can achieve 1-input-2-output,
1-input-3-output,1-input-4-output,2-input-2-output,3-input-3-output
etc. signal isolation, conversion
◆ Instrumentation and sensor signal transceiver
◆ Industrial Power isolation and control
◆ Analog signal data isolation, acquisition and conversion
◆ Industrial field signal isolation and Remote lossless
transmission
◆ Power monitoring, medical equipment isolation barrier
isolated amplifier General Description:
Jieshengda Technology JSD OI series isolation amplifier is a hybrid
integrated circuit which make the input signal isolation amplifier,
converting into a DC signal proportional output, the isolation
amplifier module front stage is the voltage (current) signal input,
Backend is a current (voltage) signal output, Integrated on the
same chip a multi-isolated micro-power supply to the internal
signal processing circuitry, make the chip achieve three-port
isolation(input, output and power supply),and the isolation voltage
between them is up to 2500 VDC, JSD OI series isolation amplifier
uses optical isolation technology, compared with the magnetic
isolation transform has strong anti-interference and
anti-high-frequency
Jieshengda Technology isolated amplifier have PCB board soldering
and standard DIN 35mm rail slot fixed installation of two rail
mounting can be achieved
1-input-1-output,1-input-2-output,1-input-3-output,1-input-4-output,2-input-2-output,3-input-3-output,the
user simply by wiring can be used..
Products very easy to use, you can achieve signal isolation and
transmission without any external components, The product
simplifies the user's design, greatly improves the PCB board space
utilization.
Notes:
1,Please read the user manual carefully before using. If any question please contact our technical support department.
2,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.
3,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,
4,To avoid invalid, or any failure, users disassemble this product is forbidden
5,the product is strictly forbidden demolish without permission for not damage
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.