Add to Cart
Stator Coil Final Winding Shaping forming Machine SMT - ZJ300
1) Application
This hydraulic system Stator Wire Forming Machine coil winding
shaping machine is suitable for air conditioner motor, washing
machine motor, compression motor, fan motor, generator motor and
pump motor.This stator forming machine adopts whole hydraulic
system and PCL program.
(2) Technical data
Production name: | Z2XJ3-300/300F stator coil wire forming shaping machine |
Stator ID: | 30~110mm |
Stator OD: | Max. 160mm |
Stator stack length: | 20~200mm |
Winding overhang: | Max 45mm |
Displacement of cylinder: | 20L/min |
Power: | 380V/50/60HZ 3.75KW |
Machine weight: | about 500Kg |
Machine dimension: | (L)1300*(W)1000*(H) 2400mm |
(3) Machine main function and characteristic
This stator forming machine adopts whole hydraulic system and PCL
program.
This wire forming shaping machine can adjust the forming stack
length by changing washer.
This coil winding forming machine has five oil cylinders which work
individually to expend inner coil, wrap outer coil and form hang
over.
After forming, there is no copper wire enamel broken or wire snap.
and coil OD and ID is close to the final forming dimension.
Both slot paper and wedge should not be damaged or turned over. The
stator should not be deformation or stator lamination should not be
upward. There is no wire enamel broken.
Production capacity ≤14s/set (exclude loading/unloading time)
Primary qualification rate ≥98.5%, after rework, the rate ≥99.5%
This machine adopts safety grating protection system. Operator need
to stand when operating.
Machine adopts two hands simultaneously start button to ensure
safety.