Black Waterproof LED Linear High Bay 150W 1200MM 130LM Per Watt for Warehouse

Black Waterproof LED Linear High Bay 150W 1200MM 130LM Per Watt for Warehouse

FEATURES :

1. Profiled aluminum housing and screw locked ends

2. Tempered frosted PC lens, low dazzling

3. Gas-tight silicon rubber seal made for wet locations

4. Aircraft-grade 6063 aluminum housing, quick heat sink and durable.

5. HLG Meanwell dirver with high power factor, flicker free instant re-strike

6. Excellent vibration & shock resistance

Parameters:

Installation Manual:

• Boom(rope) installation:

Step1: Fixed installation boom (rope) (User need purchase lifting accessories or ancillary accessories with lamp, please pay attention that the distance could not beyond the scope of product size, the installation height is based on boom length)

Step 2: Installing the product rings. Rings available for suspending installation. The fixed part of rings can be adjustable. Please note the coordination with the distance between suspender.

Step 3: Fixing the fixture, with the rings hanged on the hook.

Step 4: Connecting with 90-277VAC,50/60Hz. The product will work normally.

• Ceiling installation:

Step 1: Fixing the installation mounting bracket.(Screws for fixing the bracket available. Please note the installation distance between the bracket is no more than product size range)

Step 2: Fixing the fixture on the bracket. Tighten up the screw when the screw is adjusted to proper position with the bracket.

Step 3: Connecting with 90-277VAC,50/60Hz. The product will work normally.

Product Packaging:

1. Paper box packing for single holder

2. Gas with column or foam will be used around the carton to prevent from colliding and vibration

3. Product specification:

Attentions:

1. The light’s waterproof grade is IP65, able to withstand rains, but it can’t work under water.
2. The light’s operating at working temperature between -20℃ and 45℃.

3. Make sure the products are out of reach from children,
4. Please don’t install in flammable ,explosive or corrosive circumstances,
5. Cut off power supply before and in installation process. If the product is damaged due to mal-operation, it will invalid the warranty.

Applications:

Conference/Meeting rooms, Classrooms
2. Offices, Hospitals, Factories
3. Hotels, Offices or other Commercial Complexes
4. Residential/Institution Buildings
5. Places where energy saving and high color rendering index are needed.

LUXTRONIC LIGHTING LTD established in 2010 (Named Grandol Industry Ltd before). We experienced from small trading firm to now medium size industrial complex. With ISO9001:2008 approval & other certificates, we specialize in: Industrial LED High Bay & Outdoor LED Flood Light.

Service:

1) Design & Prototype:

Qualified engineers provide full solutions & supports according to customers' design demands, including the Appearance Design, Function Improvement, Prototype Preparation.

2) Production:

Skillful workers & modern lines promise Stable Quality & Scheduled Delivery.

Quality Control:

1) Quality Control Process:

The production process to implement the " three inspection" , self-inspection, mutual inspection, special inspection. The manufactured products require the "three pass" : Raw material into the plant pass, Semi-finished product pass, finished off the factory pass.

2) Quality Management System Certification:

Based on the concept of "Product quality is enterprise's life", GRANDOL actively adopt the quality management system certification ISO 9001:2008/CE/ROHS/TUV/IEC.

Equipment

IES Test

The Illuminating Engineering Society of North America(IIES) is the recognized technical authority on illumination, founded in 1906, it is a world famous lighting test institute IES LM-79-08 is the testing standard for Electrical and Photometric Measurements of Solid-State Lighting Products which was released in 2008.

Integrating Sphere

Integrating Sphere llight source light emitted by the fiber, is gathered in the monochromator entrance slit, the monochromator after by monochromatic light from the monochromator exit slit injection