3000M3/h Low Consumption Industrial 99.6% Oxygen plant Air Separation Plant

99.6% Air Separation Plant KDON-3000M3/H Industrial Oxygen Plant With Low Energy Consumption

KDON3000M3/H High Purity Liquid Oxygen Plant With Argon Production Air Separation Plant

1. Plant design basis

2. Main technical parameters

2.main parameter
Capacity and purity (out of cold box):

item capacity(Nm3/h) pressure(MpaG) puriry
O2 3,000 0.012 99.6% O2
Pure liquid argon 75 0.15 ≤2 ppm O2,≤3 ppm N2

raw material air parameter:
air comrepssor capacity ～16000 Nm3/h Recycling cooling water:
tempt. 32℃
inlet/ outlet pressure 0.4/0.2MPa(G) Power:
high voltage 6KV
low voltage 380V Instrument gas ( used for starting)
pressure 0.6 MPa(G)
tempt. £ 30 ℃
dew point <-40℃
flow 250 m3/h
requirement oil free
Impurity in air
CO2 £ 400 ppm
C2H2 0.5ppm
CnHm(exceptC2H2) 2ppm
Mechanical impurity 1mg/m3 untility:

99.6% Air Separation Plant KDON-AR 3000Industrial Oxygen Plant With Low Energy Consumption

3.Instrument control design principle and supply of scope
4. Covered by buyer
5.price

1. Plant design basis (buyer should provide the local condition)
 Design point of Atmosphere
Atmosphere pressure(annual average) 101.3kPa
Atmosphere tempt. 32℃
Relative humidity 70 %
O2 contained in air 20.95% O2
 Annual average tempt ℃
Max. Tempt. 41.3℃
Min. Tempt. -19.1℃
summer average tempt 25.9℃
winter average tempt -3.5℃
 Earth shke degree 7degree
 altitude 220m

5. Attachment 5:Scope of buyer’s preparation
5.1 Buyer should make sure that the raw material must match the quality requirement
5.2 All the parts mentioned in proposal would be supplied by buyer.
5.3 All foundation working and materials including lighting, washing room, supply/drain water device, communication, AC, fire fighting device, cable channel, cable pipe and other crane devices.
5.4 Power supply transformer, and power protection measurements.
5.5 Cycle cooling water system including pump, cable, pipe, valves and accessories.
5.6 cooling water pipe should be set within 1 meter near the every unit.
5.7 High voltage power to the high voltage panel, Low voltage power to the Low voltage panel
5.8 All air, gas raw materials, oil, water and power consumption.
5.9 Plant painting.
5.10 plant processing materials and tools.
5.11 manually analyzer
5.12 Buyer side government certification and fees.
5.13 Buyer supplies food and living place when seller's technicians working in place.(necessary furniture, cooking stuff, bathroom, TV, communication, internet, medical treatment, transportation, office, safety goods, and working allowance, see to the payment part. )
5.14 Buyer pays for seller's technician’s VISA, health exams fee, and transportation of international.
5.15 plant custom and all export import processes payment
Busbar panel 1 set (covered by buyer)
Transformer panel 1 set (covered by buyer)
Transformer panel 2sets (covered by buyer)
Air compressor power supply panel 2 sets
Oxygen power supply panel 3 sets
LV switch gear 2 sets
Type Drawer type
Parameters 380V 35KA
Qt. ~10(incl. s/b)

DC power supply screen
Parameter DC220V
QT. 1 set (covered by buyer) Local control panel
Control panel for air compressor 1set Expansion turbine local control panel 2sets Liquid resisting soft starter 1set TSCR 2sets LV transformer(~1,000KVA) 2sets (covered by buyer)

4. 3 Electrical system

4.3.1 Design principle
4.3.1.1Instrument control system can supervise the whole air separation plant producing process efficiently, ensure the plant running steadily and conveniently.
Provision of motor control, protection and measuring device must be in accordance with relative national standards and code. There is one HV incoming line designed. Voltage reducing start for HV motor to reduce impact of network and machinery. Busbar voltage is not lower than rated 85％ of it during the start of the motor. There are two incoming lines for LV power supply. One line is used as s/b. There is local panel for motor equipment in which electric meters, signal and control element are provided. Busbar voltage is not lower than rated 15％ of it during the start of the LV motor. Close loop adjustment by TSCR for electric heater of molecular sieve. Power supply:
1. High voltage 10KV±5% 3-phase, 3-wire, neutral point not earthing power supply
2. LV 380V/220±5% 3-phase, 5-wire neutral point earthing power supply
3. DC power supply: DC24V
4. Buyer should provide relative network system drawing, short-circuit capacity, and current value for single phase earthing .
Selection of electric appliances:
1. High voltage switch box:
Type Mid-entry vacuum switch gear
Incoming wire panel and measuring 1 set (covered by buyer)
oepration platform(including processor, and I/O hardware) 1 set
terminal board and communication cable 1 set
system software(including files) 1 set
Main instrument
UPS, 6KVA,30MINS in support 1 set
pressure difference transformor 50 sets
kinds of regulaors 15 sets
butterfly valves of M.S. purifier 10 sets
pt resistance 50 PCS
orifice plate 3sets
solenoid flow meter 2sets
analyzer 4 sets
including :
pure O2 analyzer 90～100% O2 1set Other instruments: 1sets Including double metal temperature meter, turning plate meter, 3 valve units, low tempt. Heater, rotor flow meter, pressure gauges. DCS system(determined by t he fianl design) 1set
main hardware
oepration platform 1 set
oepration platform 1 set
printer 1 set Scope of supply (determined by t he fianl design) DCSsystem is form Zhejiang Zhong Kong. UPSis form Santak. Analysis device is made in China Pressure, pressure difference transformer and flow transmitter is form ChengDu. Regulator is from SanFang Butterfly valve of M.S. purifier is forom PARKER 2 positions 3 ways and 2 positions 5 ways solenoid valves are from PARKER .220VAC/50HZ. Pressure gauges are spring pipe one. Temp. dectective is Pt100 from An Hui Local temeprature meter is double metal temperature meter. Local level gauge adopts turning plate one. Local flow meter is Rotor flow meter, and orifice plate measures the flow. Solenoid flow meter measures water flow.

Instrument selection
volume 30M3

Instrument control design principle and scope of supply
DCS concentrating and dispersing control system will be decided by final design for selction of the provisions. 2 operation platforms are in the operating rooms to monitor the parameters of the plant with the function of display, operation, regulation, memory , starting and protection interlock. The interlock function can start and stop the plant automatically according to the requirement, which also can be operated manually. There is 1 printer in the operation room to print the parameters and functions when the plant is running. There are Local panels for each machinery, which can display parts of parameters, oeprating, alarm and interlock. There is a analysis room. The analysis device is in the panel, the parameter is displayed, recorded and alrmed in DCS system. Instrument power: 220VAC and 24VDC. DCS system needs continually power supply. The power for instrument system is supplied by the power supply plate of the instrument system.

inlet: 0.01MPa(G)
outlet: 1.5MPa(G)
inlet tempt.: 30℃
outlet tempt.: £40℃
type: vertical 2 rows and 2 stages
shaft power: 142Kw
spare motor 160Kw
cooling water consumption: ~18t/h
scope of supply:host machine；filter；buffer；cooler；motor；pipelines and accessoriesand tools

oxygen tank 2 sets
pressure 2.0MPa(G)

piston oxygen compressor 3 sets(2 sets for running and 1 set for standby)
manufacturer Hangyang
discharge capacity 1500m³/h

Expanssion turbine 2 sets Capacity ～1,800 m3/h
inlet/outlet capacity ～0.56/～0.144 MPa(A)
scope of supply:
1. Main body 2 set
2. Brake fan 2 set
3. Filter 2 set
4. Tools 1 set
5. Spare parts 1 set
Process air capcity ～16000m3/h
Air outlet pressure ～0.58 MPa(A)
Air intlet pressure 17℃
MS regeneration tempt. ～170℃
Working hours 4 hours

Scope of supply:
1. MS Adsorber 2sets
2. Electric heater 2sets
Power ～200kW
avarage power consumption ～80kW
3. Silencer for vent 1 set
4. M.S. ～3.5×2t
5. Active alumina ～1×2t
6. Valves and spare parts 1set
7.

Distillation column 1 set

Distillation column space ～3500×4000 mm
height ～45,000mm

1. Main heat exchanger 1 set
2. Upper column 1 set
Type stuff
3. Condenser-evaporator (combined with lower column) 1 set
4. Lower column 1 set
Type Counter flow sieve plate
5. LN2, Liquid air subcooler 1 set
6. Crude argon column 1 set
7. Pure argon column 1 set
8. Crude liquid argon pump 2 sets ( 1 running, the other standby)
9. Cold box 1 set
10. Pipes and valve inner cold box 1 set
11. Pipes and valve out of the cold box 1 set
12. Cold box inner and outside valves, pipes and vessel supports 1 set
13. cold box, ladders, railing 1 set
14. venting silencer 2 set
15. liquid O2 spray evaporator 1 set
16. steam spray evaporator 1 set
17. Expansion turbine air filter 2 set

MS purification system 1set

air precooling system 1set
type sealed case type
Air processing capacity 16,000 m3/h
air working pressure ～0.58 MPa (A)
air inlet tempt. ＜40 ℃
air outlet tempt. ～8℃
circular rater inlet pressure ≥0.3MPa
circular rater inlet tempt. ≤30℃
cooling water consumption: 50t/h
motor power 80kW
shaft power ～70kW
scope of supply:
1. imported refrigeration compressor 1set
2. condenser 1 set
3. evaporator 1 set
4. valves of pipeline 1 set
5. refrigeration self control element 1 set
6. electrical control board 1 set
7. oepration instrument board 1 set
8. water separator 1 set
Gas,water,oil pipe and accessories 1set
1 set Vent silencer 1 set Oil cooler 1 set Valves and tools 1 set Spare parts 1 set raw material filter 1 set Process capacity ～30,000m3/h
Filter efficiency ≥99%
Filter resistance ≤0.7kPa
Filter material plant fiber

scope of supply :
1. Filt host body 1set
2. counter blowing system and control system 1 set
3. Filter bucket 1 set
4. spares 1 set
Turbine air compressor 1 set
manufacturer IHISAMSUNG
Discharge capacity ～16000m3/h
Suction pressure 98kPa(A)
Suction temp. 30℃
Discharge pressure 0.58Mpa(A)
Discharge tempt. ≤105℃
Shaft power ～1380 KW
Motor power ～1530 K W
cooling water consumption ～140T/h
scope of supply:
1. Compressor body 1set
2. Asynchronous motor 1 set
3. Intermedium gas cooler 1 set
4. subcooler 1 set
5. iol supply system 1 set
6. Base and achor bolts 1 set
7. Safety valve,check valve and vent valve, etc. 1 set
8. Anti-surge device 1 set
It consists of all machineries and necessary pipes, flanges and anchor bolts. sets of valves between each machinery
items water consumption(T/H) remarks
Raw air compressor 140
Air precooling unit 50
Oxygen compressor 18*2 2sets running and 1 set for standby
Amount ~236

3. supply of scope
Introduction of supply of scope

ITEMS SHAFT POWER(KW) MOTOR POWER(KW) REMARKS
Raw air compressor 1,380 1,530
Air precooling unit 70 80
electrical heater of purifier system 80 200
Instrument control system 10 10
Oxygen compressor 142 160
Unit power consumption(calcltated by shaft power, excluding oxygen compressor and utilities)about 0.51KW.H/Nm3
cooling water consumption
air compressor pressure ～0.58MPa(A)
inlet temp. 32℃
running periodbetween 2 times defrosting ) > 2 years defrosting time ～36 hours starting time( from start the turbine to get the production) ～36hours POWER CONSUMPTION

Beijing Silk Road Enterprise Management Services Co.,LTD is a joint venture enterprise specializing in the production of cryogenic equipment, which is the subsidiary company of Tai Wan Lian Su group. Registered capital is 10,000,000 Yuan (about 1,600,000 USD ). Founded in 1996, Tailian has been doing research and development for various technologies, manufacturing of equipment, sales and service in the filed of cryogenics in both domestic and foreign markets. Owning advanced technology and producing facilities, we also have dozens of experienced specialists for cryogenic and air separating area for years. Tailian has been the supplier of dozens of world famous transnational companies, such as China nuclear power engineering Co., Ltd, China Aerospace Science and Technology Corporation, Xinjiang Guanghui Industry Investment Group Company Limited, Sinopec Group, China National Petroleum Corporation（CNPC）, Linde Group, France Air Liquid, China National Offshore Oil Corporation, Coca-Cola,Praxair，Hang Yang Group, Pepsi, Wahaha Group, Hafei Aviation Industry Co., Ltd, ENN Energy Holding Group, Qingdao Beer, Budweiser, Shell, CIBA and B.O.C. etc. Our annual producing capability of liquid pump is round 800-900 sets, and so far we have finished more than 10,000 sets cryogenic liquid pumps to the customers. In the past few years, our productions have been exported to several countries, such as Vietnam, Kazakhstan, Pakistan, Congo, Bangladesh, Egypt, Iraq, Cambodia, Angola, Philippines, India, Venezuela, Indonesia and Lao, etc.

Beijing Silk Road Enterprise Management Services Co.,LTD is specialized in producing cryogenic liquid pumps for LNG, LPG, liquid oxygen, liquid nitrogen, liquid argon, liquid carbon dioxide, liquid ammonia and methane as well as cryogenic liquid vaporizer, oxygen compressor, carbon dioxide equipment and gas pressure regulating system. Beside that, we also undertake turnkey project of LNG/L-CNG vehicle fueling station, LNG station, LNG peaking-use evaporating station, LNG gas cylinder fueling station and undertake coal to gas project and all other industrial gas applications. Tailian also researches and develops, produces, sales and services for the equipment mentioned above.

Tailian has got the special equipment manufacturing license (A-grade pressure pipes) of People’s Republic of China and approval certificate of ISO9001：2008. Tailian is one of the members in 30 companies who got the title of ‘Golden Reputation’ in the First China Integrity Network Summit. And We are also the member “ Union of Golden Reputation”. With advanced technology, superior quality and value of after sale service, Tailian earns trust from lots of transnational gas companies both at home and abroad.

Sharp tools make good work. The administrator of Tailian realized that only good management, idea or good talent are not enough. Advanced facility must be adopted to ensure powerful manufacturing prowess and superior quality of our products. We purchased world advanced producing facilities(such as process center and CNC) and have experienced specialists, which can guarantee the good quality of products.

Our company persists in the principle of customer first, sincere service, products sale over the country, and export to Southeast Asia and the Middle East. Our products are mainly used in petroleum, chemical, nuclear power plants, iron and steel, electric power, military, aerospace and other industries.