PLC Touch Screen Control Polyurethane Sandwich Panel Line For Color Steel Sheet

PU sandwich panel production line

Technical Parameter

1.1 Roll Forming Machine

a) Motow power: up panel 4Kw, down panel 7.5Kw

b) roll forming speed: 5-8m/min

c) roller material: 40Cr, surface chrome coated, thickness 0.4mm--0.8mm

d) The way of width adjust: straight track, silk pole, reducer motor adjustable

e) width adjustable range: 600-1250mm

f) sheet thickness: 0.4-0.8mm

g) structrue: arm type adjustable, support roller in the middle

h) shaft diameter: 50mm

1.2 Uncoiler

a) motor power: 3Kw

b) hydraulic power: 2.2Kw

c) raw material: color steel sheet, aluminum sheet

d) innder diameter of coil: 500mm- 600mm

d) outer diameter of coil: 1200mm

e) coil weight: 10T

f) sheet thickness: 0.4-0.8mm

g) sheet width: 1250mm

f) uncoil speed: 1.5-12m/min

g) hydraulic pressure: 6.3Mpa

1.3 Coil Car

a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m

b) coil car stroke: 2.5m

c) pressure of hydraulic system: 6.3Mpa

1.4 Two sets of steel sheet transverse cutting machines

a) hydraulic

b) cut steel sheet according to certain length

c) two sets of PVC film covering device wich applies the PVC film onto the steel sheet

1.5 Pre-heating Room

a) temperature sensor: hot couple

b) temperature adjustment: automatic control by temperature control equipment

c) hot air motor: 18.5Kw

d) hot air heater: 200Kw

e) heat type: heated by electricity and air circulate

1.6 Double belt machine

a) effective working length: 24m

b) length & width of double belt: 1400mm x 267mm

c) double belt material: alloy steel

d) double belt thickness: 14mm

e) speed: 3-10m

1.7 Band Saw Cutting Machine

a) outline dimension of band saw cutting machine: 5500mmx5000mmx 3000mm

b) run speed of band saw: 1000-1500rpm

c) rotate diameter of band saw: 550mm

d) cutting speed of band saw: 50m/min-1000m/min

e) width of band saw: 30mm

f) length of band saw: 3000mm-4000mm

g) transverse move distance: 1500mm

h) cut length on line: 3000mm

Main Components

Profiles of PU Sandwich Panel

Photo Gallery

Loading picture

After-sale Serive

- The seller take responsibility to installation and commissioning of the equipment and free training. After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.

- Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.

- Training time: 5 days.

- Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.

-The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.)

The main products of factory is light gauge framing machine, pre-painted steel forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, The whole carriage plate for car beam unit , Steel storage unit, etc. Totally it has 100 types in 20 serious. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas, residential, greenhouse and other construction projects. Our factory can meet the construction enterprises, automobile industry, iron and steel production enterprises’s growing demand.