Add to Cart
Wall angle channel roll forming making machine
Wall angle introduction
The Wall Angle Channel Roll Forming Machine can produce different kinds of angle steels, which produces thickness of 0.4-1.2mm steel coils. The number of roll forming stations is aout 9 stations, or according to your profile drawing. We can design the machine and flow chart according to your profile drawing and requirements. We also have several feeding systems and hydraulic punching systems which can satisfy your complex punching requirements.
Technical Parameter
Material of coil | Material Thickness | 0.4-1.2 mm |
Forming system | Rolling Speed | About 20 m/min line speed |
Roller Stations | About 9 stations | |
Roller Material | 45# Steel with quenching 60mm shaft | |
Maim Motor Power | 5.5 kw | |
Hydraulic cutting Power | 4 kw | |
Cuttingsystem | Material Of Cutting | CR12 with quench treatment |
Hardness | HRC58-62 | |
Tolerance | +-1.5mm | |
Electrical control system | Electric Source | 380V, 50HZ,3 phase Also can satisfy Customer’s require |
Control System | PLC control system | |
Weight | About 3.5 tons | |
Way Of Drive | 1 inch single chain | |
Size of machine | Length 4500mm* Width 500mm* Height 800mm |
Working process
A.Passive
Decoiler..........................................................To
load and uncoiling material
(We also have Electric Decoiler and Hydraulic Decoiler to hold the
heavy material.)
B.Servo Feeding
Applicator............................................To feed the
material accurately
C.Hydraulic/Press
Punching...........................................To punch as
requirements
D.Roll Forming
Unit.........................................................To
roll form as requirements
E.Hydraulic
Cutting.........................................................To
cut sheets as desired length
(We also have non-stop hydraulic cutting system.)
F.Output Table................................................................Support the finished products
Decoiler—feedingwithguide—Rollforming——Cutting—Products collecting
Machine Components
3 ton passive de-coiler | 1 set |
Main roll forming machine | 1 set |
PLC Control box | 1 unit |
Hydraulic station | 1 unit |
Out table | 2 units |
Following cutting | 1 unit |
Safety cover | 1 unit |
Profile of product
Machine Photo
Loading pictures