Product Details
Magnetic pump for chemical filtration in plating solution PVDF 5HP
Inlet / Outlet 2" x 1.5"
Description:
Magnetic chemical Pumps are seal-less, providing for
maintenance-free and "leak-proof" operation. The magnetic coupling
acts as a clutch to provide overload protection. The broad range of
construction materials allows for a variety of applications and
service with most corrosive solutions.
Its impeller magnet assembly floats in the radial magnetic field
set up by the motor driven external drive magnet. The impeller is
designed to deliver the maximum flow and pressure utilizing the
available strength of the synchronized magnets.
Standard diameter impeller is suitable for waterlike liquids to 1.1
specific gravity. Liquids having a higher specific gravity can be
pumped if the overall diameter of the impeller is reduced, the
outlet flow is restricted,or the restrictions from a filter or
other head loss is sufficient to keep the impeller magnet in
synchronization.
The materials of construction are as specified, all of which
include a fluoride resistant ceramic spindle and thrust washer.
Casing 'O' ring is nbr and external fasteners are SS. Standard
impeller is designed to pump solutions having a specific gravity up
to 1.1.
Motors are chemical service rated continuous duty, TEFC or
explosion proof, painted two-part epoxy gray paint. An eight foot
(2.4m) three-wire cord and plug are supplied on all TEFC single
phase motors. Three phase and explosion-proof motors are supplied
without cord or plug.
Specifications:
Model | Inlet/outlet | Power | 50HZ | 60HZ | Weight (kg) |
Ph | P | HP | Curve | Flow(L/min) | Head(m) | Curve | Flow(L/min) | Head(m) |
MED/F400 | 1.5" x 1.5" | 3 | 2 | 0.5 | a | 266 | 13 | A | 270 | 12 | 12 |
MED/F401 | 1.5" x 1.5" | 3 | 2 | 1.0 | b | 350 | 17.5 | B | 360 | 17.5 | 17 |
MED/F502 | 2" x 1.5" | 3 | 2 | 2 | c | 466 | 18 | C | 475 | 18.5 | 30 |
MED/F503 | 2" x 1.5" | 3 | 2 | 3 | d | 483 | 22 | D | 485 | 22 | 32 |
MED/F505 | 2" x 1.5" | 3 | 2 | 5 | e | 566 | 27 | E | 575 | 27 | 36 |
Features:
- SEAL-LESS and LEAK-PROOF for total solution containment reliable,
trouble-free pumping
- Corrosion resistant PP, PVDF, SS316
- Centrifugal - quiet, vibration-free
- Flows to 53 gpm or 58 FT. TDH @ 60 Hz
- Maximum liquid temperature
PP: 65 °C
PVDF: 90 °C - Rugged construction Designed for continuous duty Horizontal or
vertical discharge
- Severe duty motor All motors carry 1.15 service factor at 50 and 60
Hz
- Single phase motors have automatic thermal overload protection
Exploded view
1. motor 2. main shaft 3. shaft sleeve 4. shaft unit
5. base holder 6. rear cover 7. rear cover 8. front seal
9. impeller 10. O-ring 11. Outlet O-ring 12. inlet flange
13. Inlet unit end 14. Front casing
Applications:
Electroplating solution | PCB industry | Dyeing industry |
Pharmaceutical | Waste water treatment | Effluent treatment plant |
Water treatment | Food processing cleaning | Photographic |
Chemical | Petrochemical | beverage |
Waste gas scrubber | Waste gas absorption tower | Reaction tank |
Examples
Competitive advantage
These filter chambers are designed for filtering process solutions
where clarification will extend operating life and
improve quality. The filtration vessels and chemical pumps are made
by one piece injection non-
metallic soultion contact plastic, CPVC, FRPP (Fiber glass
reinforced polyepropylene), PVDF, which features
heavy duty construction, chemical, acid/alkali resistance.
Company Profile
Focus on low-carbon energy and environment protection technology,
we design and manufacture fluid processing and control products to
give our contribution to the sustainable energy develop.
Lots of mega projects have been installed with our products,
Shanghai expo center, Shanghai Disney energy center, Beijing Z15
tower, Malaysia GDC energy station, etc. Our technology and
practical application experience, allow us to provide our client
with products and solutions which meet your expectation on
building, improving and mainting equipment. The industries we
served:
- New energy
- Petroleum and chemical
- Industrial energy
- Oil and gas
- Metals and mining
- Pulp and paper
- Water and waste water treatment
- Marine
- Power
- Refining
- Food and beverage
- Life sciences
Our R&D, customer experience and manufacturing center is
located in the “Low energy building science center” Hanghzou,
China. As a Provincial class Postdoctoral workstation by
collaboration with China State Energy research institute, which
ensure our advantage from technician, science research &
development, equipment. Our main products includes: flowmeters,
roots air blower, pump, as well as design consultancy on RO, UF, NF
design.