0.6MM 4 Layer Rogers PCB Radar Microwave Circuit Board Milling Thickness 1.2mm

0.6MM 4 Layer Rogers4350 PCB RF Controlled Remote Steering System/Smartec Sensors

Key Specifications/Special Features:
PCB features:
Layer: 4
Material: Rogers4350
Thickness: 0.6mm
Copper: 1oz
Mini hole: 0.2mm
Mini width/space: 0.2mm/0.2mm
Finish: immersion Gold

0.6MM 4 Layer Rogers4350 PCB RF Controlled Remote Steering System/Smartec Sensors

Radar microwave circuit board (PCB) production, Doppler sensor module LED light board, 5.8G, 24G sensor board, speed electronic dog motherboard, Rogeros high frequency board, Taconic high frequency board, TP-2 special media board, Board, F4B domestic high-frequency board, Rogeros and FR4 mixing plate, 4G antenna high frequency board, 4G base station high frequency board

High frequency board, high-frequency microwave board, high-frequency microwave circuit board, Taikang Nick PCB circuit board, ARLON high-frequency board, Taconic high-frequency board, asymmetrical high-frequency board, high-frequency board, ROGERS high frequency board, Mixed, Rogers mixed, Rogers 5880 plate high-frequency board Shenzhen high-frequency board processing plant Rogers high-frequency pcb

Description :
RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.
Providing tight control on dielectric constant and low loss while utilizing the same processing method as standard epoxy/glass, RO4350B is available at a fraction of the cost of conventional microwave laminates. No special through-hole treatments or handling procedures are required as with PTFE based microwave materials.
RO4350B materials are UL 94V-0 rated for active devices and high power RF designs.

Specifiction:
layer:4
board thickness:0.8mm
Copper thickness:1oz
min Hole size:0.2mm
min line width and distance:10/10mil
Surface treatment: imersion gold
Application: RF Remote Control Transmitter

Product Description
L1-L2 Blind holes;
L2-L3 Bury holes;
L1-L4 Through holes;
Copper based with Rogers 4350 T0.6mm.
Copper thickness 0.70mm;
Milling thickness 1.2mm.

0.6MM 4 Layer Rogers4350 PCB RF Controlled Remote Steering System/Smartec Sensors

Typical Applications:

• Space Saving Circuitry
• Patch Antennas
• Satellite Communications Systems
• Power Amplifiers
• Aircraft Collision Avoidance Systems
• Ground Radar Warning Systems
• Datalink on cable systems
• Remote meter readers
• Power backplanes
• LMDS and wireless broadband
• Base station infrastructur

0.6MM 4 Layer Rogers4350 PCB RF Controlled Remote Steering System/Smartec Sensors

High frequency:

0.6MM 4 Layer Rogers4350 PCB RF Controlled Remote Steering System/Smartec Sensors

Following are some types introduction for Rigid PCB and High Frequency PCB:
FR4 PCB(2layer,4 layer,multilayer)
Rogers(RO4003,RO4350,RO5880,RO3003,RO3010,RO3206,RO3035,RO6010)
F4B high frequency pcb board
Taconic(TLX-8,TLX-9,TLC-32,TLY-5,RF-60A,CER-10,RF-30,TLA-35)
Arlon high frequency pcb board
ISOLA high frequency pcb board

At the same time, we also provide corresponding PCBA services as our customer’s design and requirement.

Xinchenger Electronics co.,Ltd established in 2009,we have committed ourselves to manufacturing various of printed circuit boards.

We have accumulated abundant experiences in the line of high frequency microwave business for which widely apply to power divider,combiner,power amplifier,line amplifier,base station,RF antena,4G antena so on and so forth. Our company's sufficient stocks of hi-frequency pcb materials such as Rogers,TACONIC,Arlon,Isola,F4B,TP-2,FR-4 (dielectric rage:2.2-16) mainly used in the area of high technologies like communication device,Electronics,Aerospace,Military industry to meet our worldwide customers with high quality. Furthermore,we also keen on helping customers shorten the period of production development and 24 hours of sample service is available.

Since the day of company foundation we continuously engaged in researching special and high precision printed circuit boards with the strong production capability of 2 to 28 layers of highly precise impedence,multi-layer blind buried,multi-layer mix-compression,high TG, copper substrate,Ceramic substrate PCB. We emphasize the significance of traning program for every single staff in the company even grass-roots employees which becomes the most competitive factors to excel from others,our company have many experienced and professional teams from management to production line,30% are highly educated among the total amount of employees,advanced engineers and senior technicians are up to 80 people.

With advanced foreign technology supports and domestic 3G/4G device manufacturer in microwave pcb field which lead our experienced hi-frequency researching team to one step ahead of the line of printed circuit board business,we are honored to obtain sound reputations over our worldwide customers on the basis of fine qulity,prompt delivery,satisfied after sales service for may years and we assure our customers that we will return the favors with more and more superior products in the near future.