Hidden Car Gps Tracker Gps Tracker For Car No Monthly Fee 9-80V Voltage

Hidden Car Gps Tracker Gps Tracker For Car No Monthly Fee 9-80V Voltage

CA-V6H is a Mini intelligent GPS Vehicle positioning terminal. It combines the GSM wireless communication technology and GPS positioning system technology. terminals using industrial-grade highly integrated design,intelligent power-saving and passive drift suppression,installation is simple,connect the power supply to start work immediately. wide inpute voltage range,wide applicable to all types of cars,motor cycles. electric cars. ships. etc., can provide all-weather. real-time vehicle positioning function. with global positioning service platform,you can achieve remote vehicle management.

Feature & Function:

GSM quad-band frequency
Real time tracking by SMS/GPRS
Two-way talking function

Overspeed alarm/vibration alarm/main power off alarm/Geofence
ACC Detection
Built-in backup battery to realize power failure alarm
Cut vehicle oil or circuit (optional)

SOS Panic Button (optional)

Voice Monitor (optional)

With Android Or iOS APP Tracking

Wide Input Voltage: 9-75V DC.
OEM and ODM orders are welcome

Hidden Car Gps Tracker Gps Tracker For Car No Monthly Fee 9-80V Voltage

2. Technical parameter

1).GSM:850/900/1800/1900 Quad band

2).GPRS: Class12, TCP/IP

3).Working Voltage:9-100V DC

4).Working current:≈22mA (12vDC)

5).Working current:≈12mA (24vDC)

6).GPS locating time:Cold start≈38s(Open sky)

Warm start≈32s

Hot start≈2s(Open sky)

7).GPS Precision:10m(2D RM)

8).Working temperature:-20℃～+70℃

9).Working humidity:20%～80%RH

10).Measurement:77(L)×27(W)×15(H)mm

4.Device status indicators

4.1Connect DC 9-36V power supply and the red LED will light continuously.

4.2The green LED glistens when searching the GPS signals. When GPS works, the LED lights continuously.

4.3The intermediate blue LED (GSM signal state)

GSM signal is normal, blue LED light long bright. No GSM signal, the blue LED flashes.

GPS LED not fixed, flashes(0.2 sec/2 sec),Positioning long bright；

GSM LED no signal, flashes(0.2 sec/2 sec),Signal normal long bright；

Power LED: long bright;

All LEDS will turn off after 5 minutes. When there is a new call, the LEDs will relight and turn off 5 minutes later.

4.Installation

4.1 Preparation for the installation

4.1.1 Product Check. Open the packing box and check the device‘s model and accessories. If the model is wrong or the accessories not complete, please contact the dealer.

4.1.2 Choose SIM card. Please insert a SIM card to the device. Please take dealer’s advice as reference.

4.1.3 SIM card installation. Discharge the cover of the device and uncover the SIM card holder. Then insert the SIM card and cover SIM card holder.

4.1.4 Put back the front cover and screw it up.

4.1.5 Connect the device to the 9-36Vpower supply.(the red LED constant glow)

4.1.6 Install the device in the hidden place of the car；

The SIM card must be with GPRS function and enough deposit. If your SIM card need input PIN when power on, please cancel it.

4.2 Installation

The GPS tracker must be installed under professional personnel.

Note:

1) Please install the device in the hidden place as followings:

Under Front windshield；

In the front instrument panel；

Under back windshield；

2) Avoid being placed with signal radiators like reverse sensor ；

3) The device has GSM antenna and GPS antenna inside. Please ensure the receiving side of the device is face up and without metal cover.

Note:The metal cover will lessen the receiving of GPS signals.6. The device connecting requirements.

5. Device wiring requirements

5.1 The device power supply is DC 9-80V. The red line is positive pole while the black line is negative pole.

5.2 The negative pole of power supply connects with ground or the metals. Please do not connect with other ground lines.

5.3 When finishing the power supply wire connection, please make the plug of power supply to the device.

6.The Device Working

6.1 Power on: the device will be power on when connecting to the current. Then the three LED indicators will light continuously. The device will upload the data to the online platform (the default interval of uploading data is 10seconds). When the car is in static state for a long time, the device will be in energy saving mode and it will be more smart and precise.

6.2Power off:Pull off the power plug then power off the device.

7.User Settings

7.1 Set class instruction

Performance Parameters:

Gurantee: 1 YEAR WARRANTY.

2. Optional configurations

Accessories (relay) for cut fuel/circuit
MIC 1pc (optional accessory)

SOS Alarm button (optional accessory)

Pictures:

shenzhen CarTracker Technology Co., Ltd was founded in 2009,it is one of the most professional manufacturers for gps tracker and mobile DVR product.Our company is located in Shenzhen city,Guangdong province,China.At present our GPS Tracker products are mainly exported to Southeast Asia,Africa,South America,The Middle East ,Europe and so on.

Our main products are Car GPS Tracker,Personal GPS Tracker,large battery GPS Tracker and 3G mobile DVR.Every year we develop new products to meet customer requirements.and they are certified by CE,ROHS,FCC and 3C certification bodies.

We have a Research and Development team of more than twenty engineers. Most of them have a master's degree and 12 engineers have more than 8 years work experience in the GPS Industry.we also have a group of professional sales and after sales team. they will provide after-sales and pre-sales technical support for you.

Our factory is located in Cuishan industrial area,we have about 2000 square meters of building area and more 200 production staff.they are mainly responsible for gps product production,testing and quality control.our monthly output is more 20000pieces.the factory has passed ISO9001,ISO14000 Certification.

Welcome to visit our factory and we look forward to the opportunity to cooperate.