Remote Control Highway Drop Arm Automatic Barrier Gate Ac 100v To 264v With Solar Power

Remote Control Highway Drop Arm Automatic Barrier Gate Ac 100v To 264v With Solar Power

Motor controller diagram and functions

Important notes:

All the interfaces on this controller are only for non-electricity connection.

There are NC and NO inputs available for this machine. NC is recommended. To make it, just put the dip switch 1 to ON position. OFF position is for NO status.

1. NO/NC status adjustable, in dip switch 1, ON for NC, OFF for NO.

2. When power off, the boom will open automatically or stay closed; this is adjustable. In dip switch 2, ON is for automatic open when power off;

3. Automatic stop or automatic reverse when the machine meets external obstruction. In dip switch 3, ON is for automatic stop and off is for automatic reversing;

4. Auto closing function and the closing time is adjustable. Dip switch5,6,7,8 are for it and the delaying time is 1s,2s,3s,4s,5s,8s,10s,15s,20s,25s,30s,35s,40s,50s,60s.

5. The boom angle in up position adjustable, like 60 degree, 70 degree, 80 degree and 90 degree. And the dip switch is another independent one(1 2 switch).

6. Maintenance mode available, convenient for possible repairing and adjusting.

7. RS485 serial communication available for computer control.

8. Push button interface and remote control interface are available and separate.

9. Emergent stop input interface available.

10. Traffic light/alarm light interface

Program 1

The barrier gate can be controlled by two-key push button and an impulse will trigger the operation relay.

Connecting GND and COM, 24V with UP is for machine opening, 24V with Down is for machine closing. Other accessories interface input available, like IR sensor and loop detector signal.

Program 2

The barrier gate can be controlled by remote controller or GSM gate opener.

Connecting the antenna receiver GND to COM on the board, Remote-up is for opening and Remote-down is for closing.

If the remote control receiver is non-electric relay signal, connecting GND and COM first, the 24V connecting with Remote-up is for opening and 24V connecting with Remote-down is for closing.

Program 3

The barrier gate can be controlled by gate photocell(IR sensor) or loop detector for automatic opening and closing. There are other signal input as emergency stop and alarm signal. The connection is as program 1 mentioned.

Program 4

Boom-drop signal input: when the boom is crashed by passing vehicle, the barrier gate will stop to run with a warning output.

Specifications of Automatic Barrier Gate:

Product Dimension:

There is installation side for this barrier gate and it defines as the following picture.

A is left version, B is right version;

The user can change this installation directions.

Founded in 2002, SINOMATIC is a national high-tech enterprise specialized in R&D，production, and sales of intelligent access control products. It has nearly 200 patented technologies. Its main products including Access control turnstile, parking barrier gate/parking lock, Automatic gate opener, Anti-terrorism roadblock, etc., are suitable for the entry and exit management of vehicles and personnel such as government building, high-speed toll gate, commercial plaza, residential areas, stations, customs checkpoints, etc.

SINOMATIC has strong innovation and R&D capabilities, ultra-high technology, and craftsmanship, leading the industry into the era of intelligent variable speed interconnection.

As an innovative enterprise, SINOMATIC has always been committed to building an efficient and innovative R&D team to continuously promote technological and product innovation, improve the core competitiveness and market share of the enterprise.

At the same time, SINOMATIC attaches great importance to the construction of the talent team and focuses on introducing and cultivating high-quality R&D personnel in the field of research and development.

Technological innovation, product quality, and manufacturing capabilities are the driving force of SINOMATIC's continuous development. Brand, channels, and after-sales service are the pillars of SINOMATIC's long-term development. SINOMATIC products are sold all over the world. It has set up agency service outlets in more than 150 countries and regions including United States, Canada, UK, France, Germany, Russia, India, Singapore, Malaysia, Indonesia, Thailand, Turkey, Israel, UAE, Saudi Arabia, South Africa Nigeria, Kenya, etc.

With superior product quality and a high-quality after-sales service system, "SINOMATIC" has become a world-renowned brand of Access control products. SINOMATIC always keeps forging ahead, makes every product with hearts, and adheres to build trustworthy SINOMATIC quality and Chinese national brand in the world.