Long Distance Remote Control Parking Lock Battery And Solar Powered 430mm Height

Long Distance Remote Control Parking Lock Battery And Solar Powered 430mm Height

Introduction of parking lock:

Car Parking Lock is an iron mechanical device which can avoid parking place being occupied by others.

Car Parking Lock is installed on flat cement floor. And it is generally installed in 1/3 entrance of parking space.

Technical parameters of solar type parking lock:

FUNCTIONAL FEATURES INTRODUCTION

• Manual control

If the battery is short of power or out of service, manual control can be made by pulling/pressing the rocking arm of the parking lock, so that the battery can be conveniently taken out for recharging, replacement or maintenance.

• Power Cut-off on Resistance

The power shall be automatically switched off on external forces unaffordable in the lifting of the parking lock to protect the electrical motor from being damaged.

• Power Shortage Indication

When the power is too short to start the parking lock, the indication lamp on the parking lock will flicker for three times to remind the user of recharging the battery in time.

• Alarming and Resetting on External Force

For these series parking lock, if the rocking arm is forced to be lowered when lifting, with the action of the external force, the front/back angle of the rocking arm will be changed, the parking lock will alarm to remind the external force applier to remove external force or remind the managerial staff to make treatment. The rocking arm will reset automatically after 5~7 seconds.

• Theft Protection

The position of the foundation for parking lock and ground installation will be protected by a large external cover. The cover can only be opened by the user with the key to make theft protection.

More photo car parking lock:

INSTALLATION PRINCIPLE AND METHOD

1. Installation Principle

A. Installation Position

The vehicle shall not touch the parking lock when going in and out of the parking space. The parking lock is suggested to be installed in the middle of entrance of parking space.

B. Installation Site

The lock is required to be installed on level and dry cement ground.

2. Installation Method

A. Lift the rocking arm manually with hands, open the lock with key. Open the upper cover to install the lock.

B. Drill three holes (12mm of diameter and 50mm of depth) and install M8 expansion bolts on the ground according to the locations of three installation holes on the parking lock foundation.

C. Cover three foundation spacers on the expansion bolts, and then cover parking lock foundation, install and tighten the bolts to finish installation.

D. Before using, first insert the plug which the color is corresponding to the solar panel lead wire into the battery pins(red for positive electrode and blue for negative electrode). Then set the battery on level position. Insert the plug into the socket of the parking lock, sort up the wires.

E. Install the upper cover. Keep the upper and lower fixed blocks joggling (hold the back of upper cover to push forward as indicated in the schematic). Then lock the upper cover.

Founded in 2002, SINOMATIC is a national high-tech enterprise specialized in R&D，production, and sales of intelligent access control products. It has nearly 200 patented technologies. Its main products including Access control turnstile, parking barrier gate/parking lock, Automatic gate opener, Anti-terrorism roadblock, etc., are suitable for the entry and exit management of vehicles and personnel such as government building, high-speed toll gate, commercial plaza, residential areas, stations, customs checkpoints, etc.

SINOMATIC has strong innovation and R&D capabilities, ultra-high technology, and craftsmanship, leading the industry into the era of intelligent variable speed interconnection.

As an innovative enterprise, SINOMATIC has always been committed to building an efficient and innovative R&D team to continuously promote technological and product innovation, improve the core competitiveness and market share of the enterprise.

At the same time, SINOMATIC attaches great importance to the construction of the talent team and focuses on introducing and cultivating high-quality R&D personnel in the field of research and development.

Technological innovation, product quality, and manufacturing capabilities are the driving force of SINOMATIC's continuous development. Brand, channels, and after-sales service are the pillars of SINOMATIC's long-term development. SINOMATIC products are sold all over the world. It has set up agency service outlets in more than 150 countries and regions including United States, Canada, UK, France, Germany, Russia, India, Singapore, Malaysia, Indonesia, Thailand, Turkey, Israel, UAE, Saudi Arabia, South Africa Nigeria, Kenya, etc.

With superior product quality and a high-quality after-sales service system, "SINOMATIC" has become a world-renowned brand of Access control products. SINOMATIC always keeps forging ahead, makes every product with hearts, and adheres to build trustworthy SINOMATIC quality and Chinese national brand in the world.