Add to Cart
Manganese Steel Lining Plate Ball Mill for Mineral Ore Dressing 25 - 200 Mesh
Introduction
Ball mill is used in mineral beneficiation area usually as crushing and grinding before kinds of minerals grade separation. It can grind coal ash (or sand, stone) into required fineness in aerated concrete, then use coal ash pump to send them into the slurry tank storage respectively. In addition, the energy saving ball mill can grind all kinds of ore materials, the grinding fineness can adjust from 25 to 200 mesh. And according to the material and discharging methods, ball mill could be in wet way and dry way.
Ball Mill Structure
Contained feeding system, the discharging system, the transmission system(speed reducer, small transmission gear, electrical machinery, electric control), etc.
Working Principle
First: Materials spirally and evenly go into the first cabin of the grinding machine through the feeding hollow shaft from the feeding device, and inside the first cabin, there are ladder lining boards or ripple lining board in which there are many steel balls with different specifications.
Second: The cylinder rotates and produces eccentric force to bring the steel balls to a certain height, and then the steel balls will fall down to impact and grind the materials.
Third: After being coarsely ground in the first cabin, the materials will go through the single-layer partition board and into the secondary cabin in which there are flat lining board, and in the lining board there are steel balls to further grind the materials.
Fourth: the powdery materials will be discharged from the discharging grating bar to complete the powder grinding process.
Technical Data:
Model | Effective volume (m3) | Max. steel ball load (t) | Capacity (t/h) | Power (kW) | Rotary speed(rpm) | Weight (t) | ||||
MQG | MQY | MQS | MQG | MQY | MQS | |||||
φ900×1800 | 1 | 1.3 | 1.7 | 2 | 0.9-1.6 | 1.7-3.2 | 2-3.7 | 15 | 37 | 4.2 |
φ900×2100 | 1.1 | 1.5 | 1.9 | 2.3 | 1-1.9 | 2-3.7 | 2.3-4.3 | 18.5 | 37 | 4.9 |
φ900×3000 | 1.6 | 2.2 | 2.8 | 3.3 | 1.4-2.7 | 2.9-5.4 | 3.3-6.2 | 30 | 37 | 7.6 |
φ1200×2400 | 2.4 | 3.3 | 4.1 | 4.9 | 2.2-4 | 4.3-8 | 5-9.2 | 30 | 35 | 8.7 |
φ1200×3000 | 3 | 4.1 | 5.2 | 6.2 | 2.7-5 | 5.4-10 | 6.2-12 | 37 | 35 | 13 |
φ1200×4500 | 4.4 | 6.2 | 7.7 | 9.3 | 4-7.5 | 8.1-15 | 9.3-17 | 55 | 35 | 14 |
φ1500×3000 | 4.8 | 6.6 | 8.3 | 10 | 4.3-8 | 8.6-16 | 10-19 | 75 | 29 | 15 |
φ1500×4500 | 7.1 | 10 | 12 | 15 | 6.5-12 | 13-24 | 15-28 | 110 | 29 | 18 |
φ1500×5700 | 9 | 13 | 16 | 19 | 8.2-15 | 16-31 | 19-35 | 130 | 29 | 24 |
φ1830×3000 | 7.1 | 10 | 12 | 15 | 6.4-12 | 13-24 | 15-28 | 130 | 24.5 | 28 |
φ1830×4500 | 10.6 | 15 | 18 | 22 | 10-18 | 19-36 | 22-41 | 155 | 24.5 | 32 |
φ1830×6500 | 15.3 | 21 | 27 | 32 | 14-26 | 28-52 | 32-60 | 210 | 24 | 35 |
φ1830×7000 | 16.5 | 23 | 29 | 34 | 15-28 | 30-56 | 35-64 | 245 | 24 | 37 |
φ2100×3000 | 9.4 | 13 | 16 | 20 | 9-16 | 17-32 | 20-37 | 155 | 23.5 | 42 |
φ2100×3600 | 11.3 | 16 | 20 | 24 | 10-19 | 21-38 | 24-44 | 180 | 23.5 | 44 |
φ2100×4500 | 14.1 | 20 | 25 | 30 | 13-24 | 26-48 | 30-55 | 245 | 23.5 | 52 |
φ2100×7000 | 22 | 31 | 38 | 46 | 20-37 | 40-74 | 46-86 | 380 | 23.5 | 57 |
φ2200×3600 | 12.5 | 17 | 22 | 26 | 11-21 | 23-42 | 26-49 | 210 | 21.5 | 52 |
φ2200×4500 | 15.6 | 22 | 27 | 33 | 14-26 | 28-53 | 33-61 | 245 | 21.5 | 54 |
φ2200×6500 | 22.5 | 31 | 39 | 47 | 20-38 | 41-76 | 47-88 | 320 | 21.5 | 60 |
φ2200×7000 | 24.2 | 34 | 42 | 51 | 22-41 | 44-82 | 51-95 | 380 | 21.5 | 63 |
φ2200×8000 | 27.8 | 38 | 48 | 57 | 26-46 | 49-90 | 57-104 | 420 | 21.5 | 67 |
φ2400×3600 | 15 | 21 | 26 | 31 | 14-25 | 27-51 | 31-58 | 280 | 21.3 | 60 |
φ2400×4500 | 18.7 | 26 | 33 | 39 | 17-32 | 34-63 | 39-73 | 320 | 21.3 | 71 |
φ2400×6000 | 24.9 | 35 | 43 | 52 | 23-42 | 45-84 | 52-97 | 400 | 21.3 | 84 |
φ2400×7000 | 29.1 | 41 | 51 | 61 | 26-49 | 53-98 | 61-113 | 475 | 21.3 | 92 |
φ2700×3600 | 18.8 | 26 | 33 | 39 | 17-32 | 34-64 | 40-73 | 380 | 20.6 | 82 |
φ2700×4500 | 23.5 | 33 | 41 | 49 | 21-40 | 43-80 | 49-92 | 480 | 20.6 | 90 |
φ2700×6000 | 31.4 | 44 | 55 | 66 | 29-53 | 57-106 | 66-122 | 560 | 20.6 | 105 |
φ2700×7000 | 36.6 | 51 | 64 | 77 | 33-62 | 67-124 | 77-143 | 630 | 20.6 | 110 |
φ3200×4500 | 33.5 | 47 | 58 | 70 | 31-57 | 61-113 | 70-131 | 800 | 18.2 | 137 |
φ3200×6000 | 44.7 | 62 | 78 | 94 | 41-76 | 81-151 | 94-174 | 1000 | 18.2 | 160 |
φ3200×7000 | 52.2 | 73 | 91 | 109 | 47-88 | 95-176 | 110-203 | 1120 | 18.2 | 185 |
φ3600×4500 | 42.8 | 60 | 75 | 90 | 39-72 | 78-145 | 90-167 | 1120 | 17 | 200 |
φ3600×6000 | 57.1 | 80 | 100 | 119 | 52-96 | 104-193 | 120-223 | 1400 | 17 | 220 |
φ3600×7000 | 66.6 | 93 | 116 | 139 | 61-113 | 121-225 | 140-260 | 1600 | 17 | 245 |
φ3600×8000 | 76.1 | 106 | 133 | 159 | 70-129 | 138-257 | 160-297 | 1600 | 17 | 270 |
φ3600×9000 | 85.6 | 120 | 149 | 179 | 78-145 | 156-289 | 180-334 | 1800 | 17 | 285 |
φ3800×6500 | 69.1 | 96 | 121 | 145 | 63-117 | 126-234 | 145-270 | 1800 | 16.7 | 277 |
φ3800×8500 | 90.4 | 126 | 158 | 189 | 82-153 | 165-306 | 190-353 | 2250 | 16.7 | 300 |
Case:
Ball Mill for Grinding Chromite Delivered to Russia