500*600mm 3mm Thickness 3K Carbon Fiber Board Twill Weave For RC Parts

General Purpose 500*600mm 3mm Thickness 3K Carbon Fiber Plate/Sheet for RC Parts

Specification

Other information

Carbon fiber plate, graphite fiber, carbon graphite or CF, is extremely thin materials including

fiber diameter is about 0.005 -- 0.010 mm, mainly of carbon atoms.Micro crystal of carbon atoms together,

is basically a long axis parallel arrangement of the fibers.The size of the crystal arrangement makes

the fiber is very strong.Thousands of carbon fiber wrapped together to form a yarn, can be used alone

or woven fabric.Carbon fiber has a lot of different weave patterns and can add thermoplasticresin and

wound or molded to form composite materials, such as carbon fiber reinforced plastic to provide a high

strength weight ratio.The density of carbon fiber is a little lower than the density of steel, make its

application requirements for low weight.Carbon fiber properties, such as low weight, high tensile strength,

low thermal expansion and make it very popular in the aerospace, military, civil engineering and motor

sports, and other sports competition.

Our Services

Our Carbon Fiber Panels are constructed with the same certified carbon fiber that is currently used

in state of the art aircraft and sailing yachts.with the use of certified T-300 carbon fiber fabric all of our

carbon fiber panels are made to the highest standards in both manufacture and material.

FAQ

1. Q : Why do you want to choose your company

2. A : Our company has a standardized product inventory, product customization service and high

efficiency of proofing and small batch.

3. Q : How to pay?

4. A : You can through the Western Union, L/C, T/T, PayPal

How long will it take me to get my order once placed, processed and shipped?

If you must have an order ship out SAME DAY than please phone us prior to 1pm MST to

determine whether or not we can fulfill your request.

A UPS Ground chart is provided for you here.

On occasion, we may be temporarily out of stock on an item in which case we will in good faith keep you

updated and give an expected lead time for production. We cannot guarantee that all product is available

and ready to ship.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.