Yellow / Green / White Epoxy Resin Nylon Plate Sheet Heat Resistant

Accept orders for blue White beige Nylon Parts plate have toughness level.


Features

Commonly used nylon melting temperature:
PA66-260 ~ 290 ℃
PA6-230 ~ 280 ℃
PA12-240 ~ 300 ℃ of modified engineering plastics such as nylon molding shrinkage (ASTMD955)
PA6 series molding shrinkage rate
Name and describe the molding shrinkage % note
15% glass fiber reinforced PA6 PA6G15 0.5 0.8
20% glass fiber reinforced PA6 PA6G20 0.4 0.6
30% glass fiber reinforced PA6 PA6G30 0.3 0.5
40% glass fiber reinforced PA6 PA6G40 0.1 0.3
50% glass fiber reinforced PA6 PA6G50 0.1 0.3
25% glass fiber reinforced flame retardant PA6 0.2-0.4 - Z - PA6G25
30% glass fiber reinforced flame retardant PA6 0.2-0.4 - Z - PA6G30
30% glass fiber enhanced halogen-free flame retardant PA6 0.2-0.4 - Z - PA6G30
Halogen-free flame retardant PA6 0.8-1.2 - Z - PA6
30% mineral filler halogen-free flame retardant PA6 0.5-0.8 - Z - PA6M30
30% glass bead filled PA6 PA6M30 0.8 1.2
30% glass fiber 0.3 0.5 PA6M30 mineral composite filled PA6
40% glass fiber 0.2 0.5 PA6M40 mineral composite filled PA6
0.6 0.9 PA6M30 30% mineral filled PA6
0.4 0.7 PA6M40 40% mineral filled PA6
PA6 injection molding grade 1.4 1.8 PA6
1.2 1.6 PA6 PA6 rapid prototyping
PA6 toughening PA6 1.0 1.5 in general
Medium PA6 toughening PA6 0.9 1.3
PA6 toughening PA6 0.9 1.3
MoS2 fill 1.0 1.4 PA6 wear-resisting PA6

Specification

FQA

Q: In commonly used nylon rods mainly is what material.Could you tell me the material what is the brand

and performance USES?
That is commonly used in industrial nylon rods mainly has two kinds: one kind is extrusion molding, is

a kind of casting molding.Out of the materials mainly
Is nylon 6, 66, 1010, 12, 11, 1212, such as material, casting of the commonly used is the MC nylon.
According to the different requirements of different materials selected nylon.
Extrusion classes: one for ordinary nylon, nylon 6 and 66 and long carbon chain nylon 1212, its bibulous

rate, poor wear resistance, hardness is larger
Tall, slightly better heat resistance, low temperature resistance is a bit poor.If you use environment

requiring water resistant, cold resistant, wear resistant, suggested to select excellent long
Carbon chain nylon.
Casting bar, forming efficiency is low, performance is close to ordinary nylon.

Q: Nylon rods, such ability of alkaline corrosion?
Nylon products is a kind of alternative polymer materials of copper and other metals, has been widely

used in chemical industry, machinery, scientific research, etc...And has the high resistance
Alkaline, nylon rods density compressive nylon rods (Beijing) nylon rods density compressive...It is light

weight, high strength, corrosion resistance, resistance to pollution, construction is convenient,
The pattern...Artificial marble is composed of modified resin with gravel, neutral or alkaline. Features:

surface smooth level off, without concave and convex, acid-proof alkaline, anti-corrosive,
High mechanical strength. USES: used in chemical machinery, etc.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.