Plain light carbon fiber tube , Moulded 3 k carbon fiber Rod circular

Plain light carbon fiber tube 3 k carbon fiber Rod carbon fiber circular tube.

Product features

Carbon fiber is a kind of like the rayon, synthetic fibers of carbon fibrous materials.It's less than a quarter

of steel, the carbon fiber resin composite materials tensile strength

Carbon fiber is very important in the area of the world high-tech new industrial materials.Widely used in

civil, building, chemical industry, industrial, aerospace and super sports car.
Advantage: can customize according to the size and shape.

Material: 100% of the carbon fiber, glass fiber, glass fiber and carbon fiber;

Features: high strength, high modulus, light weight, high temperature resistance, corrosion resistance,

acid and alkali resistance, oxidation resistance, creep, fatigue resistance, ultraviolet ray, thermal expansion

coefficient, etc.
Advantages: high operating temperature, under the bad environment, durable, not changeful form, aging

extrusion;

Requirements:
1.Size can according to customer's requirements;
2.New product must provide 3 d drawings or sample production.
3.The product need to open mould.
Welcome calls to sample consultation, we will provide you with the best service and quality.

Specification

Carbon fiber

Carbon fiber, also known as carbon fiber, referring to the carbon fiber woven or of multilayer composite

materials.

Because it is light and hard, so its application is very extensive.Physical structure and chemical properties

of the 6 microns in diameter in the front of carbon fiber and the comparison of human hair behind every

carbon fiber by thousands of tiny carbon fiber more, about 5 to 8 microns diameter

At the atomic level of carbon fiber and graphite phase Nearly, is made up of layers of carbon atoms

arranged in hexagonal type

General carbon fiber density of 1750 kg/m3.High heat conduction ability but the capacity of the battery is

low, the heat capacity of the carbon fiber is lower than copper

FAQ

Q : What is the mode distribution of the goods.

A : Determined according to the number and weight of the goods by air or by sea.

Q : Is there any discount for the product

A : You can according to the number of products you need to adjust the discount.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.