High Performance Tolerance ±0.1 Carbon Fiber Plate laminated sheet of 3k / Twill

High Performance Tolerance ±0.1 Carbon Fiber Plate laminated sheet of 3k / Twill.

Introduce

Carbon Fiber Plate
Camping tents, mosquito nets, kites, windmills, windsurfing, toys, model aircraft, golf bag, golf practice

nets, flagpole, flying saucer, curtains, bags, umbrellas, handbags, bows and arrows, sprayer, handicrafts,

advertising X exhibition stand, PCB equipment rotating shaft, and other support to replace steel and

plastic products.

Technology
A. Glass fibers impregnated resin after curing in the electric light one of the high speed polymerization,

the traction pultrusion.
B. The carbon fiber composite materials in advance in phenyl ethyl dilute base polyester resin by adding

heat curing pultrusion torsion (wrap).
Or technology: pultrusion

Specification

The characteristics of

Carbon Fiber Plate has many excellent properties, carbon fiber axial strength and high modulus, low

density,highperformance than, no creep,Not resistant to ultra high temperature oxidation environment,,

good fatigue resistance, heat and electrical

conductivity between non-metal and metal, small thermal expansion coefficient
And anisotropy, good corrosion resistance, X-ray permeability good, good thermal conductivity, good

electromagnetic shielding conductive.
Carbon fiber compared with the traditional glass fiber, the young's modulus is its three times as much;It

compared with kevlar fiber, the young's modulus
About 2 times as much, insoluble in organic solvents, acid, alkali not expanding, the corrosion resistance.

Carbon fiber is the development of national defense and national
People's important strategic materials, the economic
Carbon fiber carbon materials have been in the areas of military and civilian industry has a wide range

of applications.From aerospace, aviation, automobile,
Electronic, mechanical, chemical, textile and other civilian industry to sports equipment and leisure

products and so on.
Carbon Fiber Plate reinforced composite material can be used in aircraft manufacturing, and other areas of the

military, and industrial area, such as wind power blades, electricity
Magnetic shielding in addition to the body, such as electric materials, artificial ligament substitute material

and used in the manufacture of rocket shell, powerboat, industrial robots,
Automobile plate spring and the drive shaft, etc.The bat, and other areas of the sports.Carbon fiber is

a typical new industrial materials in the field of high-tech.

(1) High tensile strength, 7 to 10 times that of equal section steel.
(2) Light weight, density is only 1/4 of ordinary steel.
(3) Good durability, chemical impedance and bad environment, climate change, damage.
(4) Section construction convenient and quick, energy saving, easy to guarantee of construction quality.
(5) The applicability is wide and concrete members, steel structure, wooden for reinforcement.Can greatly

improve bearing capacity, seismic performance and durability of the components.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.