Ultra Light Magnesium Lithium Alloy MgLi 5% Master Alloy For Thixomolding Rolling Stamping Injecttion Molding

Ultra light Magnesium lithium alloy MgLi5% master alloy for thixomolding rolling stamping injecttion molding

Magnesium lithium alloy (magnesium-lithium alloy) It is the lowest density of structural metal materials, in the magnesium metal to add lithium, usually 14-16% lithium, its specific gravity between 1.4-1.6, compared with the general magnesium alloy 1.8 Lower, slightly higher than the plastic density, strength 220 ~ 340MPa, elastic modulus 40GPa. Damping, aluminum alloy is more than ten times, which is able to absorb the impact energy, noise reduction effect is good in shielding electromagnetic interference, the magnesium-lithium alloy also has outstanding performance.
Magnesium lithium alloy materials in addition to ultra-light, the most significant feature can be molded at room temperature plastic processing, such as rolling, stamping and other mass production technology, but also casting molding and semi-solid injection molding.

China's auto industry and 3C industries such as transformation and upgrading and its significant economic position in China to enhance the magnesium-lithium alloy industry to make the market optimistic. Among them, the automotive industry, lightweight, environmentally friendly needs, especially the development of new energy vehicles, as well as magnesium-lithium alloy R & D and recycling technology continues to progress, to promote magnesium-alloy widely used will be good news.
Magnesium lithium alloys in the pharmaceutical chemical and aerospace industry applications will also grow. The CAGR is 20% -25% due to the steady growth of the downstream end-consumer market, which includes the application of magnesium-lithium alloys in transportation, 3C, aerospace and pharmaceutical and chemical industries.
In addition, as a non-ferrous metal alloy industry sub-sectors, magnesium alloy industry in China's manufacturing industry to upgrade the process to be affordable. As a capital, material-intensive industries, raw material prices stable and low level, the casting industry consolidation, technology research and development progress will be more conducive to magnesium-lithium alloy industry, the market is more optimistic.

Deep processing products grade:

LA931 (mg85-l i9-A3-Zn3), l AZ931 (mg85-l i9-A3-Zn1), MA18, MA21

We have many other alloys such as :

Mg-La Alloy; Mg-Sb Alloy; Mg-Ce Alloy; Mg-Sr Alloy; Mg-Er Alloy; Mg-Sn Alloy; Mg-Yb Alloy; Mg-Ir Alloy; Mg-Dy Alloy; Mg-In Alloy; Mg-Re; Mg-Ti; Mg-Re (La); Mg-Co; Mg-Mn; Mg-Si; Mg-Ca; Mg-V; Mg-Fe; Mg-Zn; mg-Ni; Mg-Al-Sc; Mg-Cu; Mg-Y-Ni; Mg-Al; mg-Al-Zn.

1. Mg alloys:

MgY25/30, MgMn3/5/10 , MgCa15/20, MgCe20/25/30, MgNd20/25/30, MgSc2/5/10/30, MgGd20/25/30, MgSr10/20, MgLa20/25/30,MgZr25/30,MgEr20,MgAl50/68,MgCu15,MgLi10,MgSi3 ,NiMg etc.

ZK60, ZM2,ZM3,ZM6,ZM21,ZM31,WE43,WE57,WE94,MnE21 etc.

For Magnesium alloys, we have strong technical team to supply customized alloy according to customers demand.

2.Al alloys:

AlZr,AlV,AlY,AlZn, AlTi,AlB,AlMn, AlEr,AlLa,AlCe, AlFe,AlSc,AlSr, AlCo,AlCr ,AlMo etc.

3. Rare earth alloys:

Y ingot/granules, DyFe ingot etc.

Chemical composition of other rare earth alloy for your refrence

China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support.

Our sales office located in Changsha, Hunan province, plant located in Hunan,Shanxi, Henan,Guizhou province.Our business scope including : Cathodic protection products for fresh water and marine anti-corrosion products such as magnesium anodes,Aluminum anodes ,Zinc anodes etc.;Master alloy for aerospace ; Aluminum alloy , Magnesium investment castings industry; Magnesium alloy profile :Extrusion/hot rolled billet, plates,bars etc .for various civil & military industry,such as grade AZ31B,AM80,WE43,ZK60 etc.; high wear-resistance & hardness ceramic products for sandblasting nozzle & bulletproof plate for armor vest, armor vehicle.

Along with strong economic development in China, we expand our business very well, Product capacity is over 5000mt per year.Turnover reach to USD20,000,000.00 per year.

Our Products are widely accepted and recognized by clients worldwide including Europe, North America, East Asia, Middle east etc..

Our R&D department have strong technical design capacity. We closely cooperated with colleges and universities, supply the service for various companies in China and overseas.

Believe we can be your long term and reliable supplier .