Home /Lab Supplies /

Supports LED Hot Swap 30W 1-10V, Push Constant Current Led Driver Dimmable High Power LED Strip

Supports LED Hot Swap 30W 1-10V, Push Constant Current Led Driver Dimmable High Power LED Strip

Brand Name:Merrytek
Certification:Semko CE0700 RoHS
Model Number:ML30C-PV2
Minimum Order Quantity:Stop production, not available.
Delivery Time:1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit.
Payment Terms:T/T, Western Union
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Supplier`s last login times: within 33 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Supports LED hot swap 30W 1-10V, Push Dimmable LED Driver High Power LED Strip Constant Current

Description:

  • 5 year warranty
  • Flicker-free for whole dimming range
  • Stand-by power below 0.5W
  • Primary & secondary dimming with push button
  • 1-10V dimming
  • Dim via a potentiometer
  • Supports LED hot swap
  • Protection: short circuit / over temperature/ over voltage
  • Derating current for over high ambient temperature.
  • Dimming level memory at mains restores
  • Multi-output currents set via dip switches

Applications:
For LED down light, LED panel light, led strip, led tube etc…

Dimming Operation:

1) High voltage & low voltage PUSH dimming (see wiring diagram, Fig A & B)

  • ON/OFF: Short press push switch for 0.12s~0.4s.
  • Dimming: Long press push switchfor (>8s and <15s). The dimming range is 2%-100%, it takes 8s from the darkest to the brightest. Self recovery when blackout.
  • Synchronization: If there is any Led driver is not synchronized when the same PUSH switch is connected to the driver, long press the PUSH switch for (>15S), the connected LED driver will stay at 50% brightness. (LED current will be the 50% of the maximum current). It can achieve synchronization automatically for up to 15 pcs and the maxium lead length of the dimming control terminal is 20m.

2) 1-10V dimming (see wiring diagram, Fig C)

When the LED driver is on, it can achieve dimming by rotating the 1-10V dimmer, the dimming range is 2-100%. When the 1-10V dimmer output is 1V, LED will be adjusted to the darkest and LED current will be the 2% of the maximum current. When the 1-10V dimmer output is 10V, LED will be adjusted to the brightest and LED current will be the 100% of the maximum current.



InputOperating Voltage198-264VAC 50Hz /60Hz
Input Voltage220-240VAC 50Hz /60Hz
Input Current0.18A Max.
Power Factor≥0.90 @230VAC(Full load)
No-load power≤1.5W
Stand-by Power≤0.5W
Efficiency86%Max. @230VAC(Full load)
Wiring MethodPress fit terminal Wire Diameter:0.75-1.5mm2
OutputOperating modeConstant Current
Load typeLED
Ripple requirement (Flickering or Flickering-Free)Flicker value: less than 2% for whole dimming range
No-load output voltage68VDC Max.
Load output voltage range6-60VDC
Full load output power30W Max.
Load output current250MA(6-60V) 350MA(6-60V) 400MA(6-60V) 450MA(6-60V) 500MA(6-58V) 550MA(6-55V) 600MA(6-50V) 700MA(6-43V) 12V (0-700MA) 24V (0-700MA)
Constant current/voltage PrecisionConstant Current Precision ±5%
Wiring methodPress fit terminal Wire Diameter:0.75-1.5mm2
Control MethodPrimary PUSH DimmingPrimary PUSH dimming & secondary PUSH dimming(Max.lead length:20M)
1-10V(0-10V)Dimming1-10V dimming (Terminal current<1MA) (Max.lead length:20M)
Dimming RangePrimary PUSH dimming:0%-100% 1-10V dimming:2%-100%
PotentiometerYes, 100kΩ
Exception Protection RequirementsInput over voltage
Protection
N/A
Output over voltage Protection300VAC 2hours
Output over load protectionYes, self recovery
Output no load protectionYes, self recovery
Output over temperature
protection
Yes, self recovery
Output short circuit protectionYes, self recovery
Output LED hot swapAt least 2 series LED lamp (6V), electrothermal hot swap does not damage the LED lamp

Operating
Environment

Operating temperature/ humidity-25℃+50℃ Humidity : 85% (Non-condensing)
Storage temperature/ humidity-40℃+80℃
Outer Max. Temp(Tc)85℃

Safety
& EMC

Isolation pressurization

3750VAC 5mA 60S Input“L N”-Output “SEC+ SEC- 1-10V”)
1500VAC 5MA 60S (Input “L N”-“Ground”)
500VAC 5MA 60S (Output “SEC+ SEC- 1-10V”-“Ground”)

EMCEN55015 EN61547 EN61000-3-2 EN61000-3-3
Safety requirementEN61347-1 EN61347-2-13
Certificate requirementSemko CE0700 RoHS
OthersIP ratingIP20
Protection levelClass I
Packaging requirementIndependent installation
Installation dimension103*67*22mm
Blackout memory functionYes
Dimming synchronizationsupports 15 drivers synchronization
Packaging requirementPE Bag Clapboard Outer Carton(K=A)
Life50000h @Ta full load












China Supports LED Hot Swap 30W 1-10V, Push Constant Current Led Driver Dimmable High Power LED Strip supplier

Supports LED Hot Swap 30W 1-10V, Push Constant Current Led Driver Dimmable High Power LED Strip

Inquiry Cart 0