12v 120v 230v high temperature resisitance ceramic cartridge heater

12v 120v 230v high temperature resisitance ceramic cartridge heater

Technical Details

1. Outer sheath material: Inconel600

2. Inside magnesium oxide insulation material: 99.99% high purity magnesium oxide

3. Heating element: high durance and high temperature NiCr2080 heating elements from Germany

4. TC material: High quality TC elements to ensure ±5 ℃tolerance

5. Max working temperature: 400℃

6. High voltage stability test:

7. Less than 0.5mA leak under 1000V for 30 seconds

8. OD range: 3mm-32mm

9. The range of the Total Length: 25mm----2500mm

10. Maximum power density: 40w/cm²

11. Unheated zone: 10mm at lead end and about 5mm at bottom

12. Lead options:

A: Solid Nickel Pin: wire 300℃ or 500℃

B: Swaged in wire: 500℃ wire coming from inside

Description

Cartridge heater is a piece of heating elements made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr20/80). It is used to heat in plastic injection moulds, dies, platens ….

Cartridge heater is one of the electric heating elements, which is widely used in industry mould heating. Compared with the same heating element of high thermal, cartridge heater can save 5% of electric materials, and heat efficiency can reach 90%. Cartridge heater is cylindrical electrical heating elements with stainless steel sheath, which watt density can reach 25 W/cm2 and their operating temperature can go up to 800°C (1472°F)

Applications

Usually, cartridge heaters are used to heat solids such as injection presses heating plates or various tools; On the other hand, they are also used for heating up water and gases under certain conditions. Especially, it is widely used in automotive industry. Cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries.

Pictures

Pickage

12v 120v 230v high temperature resisitance ceramic cartridge heater

Wuhan Global Metal Engineering Co., Ltd (GME) specialize in the supply of heating elements and temperature sensors(thermocouples & RTDs) for a vast array of industries since year 1995.

Our main products include but not limited to Coil heater, Cartridge heater, Flexible Tubular heater, Cast-in Heater, Band heater, Thermocouple, RTD’s, Thermocouple extension wire, Thermocouple connection head , Mineral Insulated thermocouple cables , thermowell, etc.

After 20 years growth, we have more than 200 employees in the factory including 50 sophisticated technicians. Our products have been exported to many countries including North America, South America, Europe, Middle East ,South Asia, etc.

More details, you can also visit our website: https://www.gmemetal.com