Add to Cart
Stainless Steel 410 Philips Flat Head Self-drilling Screw with
Wings
This self-drilling screw with cutting wings is made of 410
stainless steel, which can be hardened through heat treatment,
giving it the ability to drill through metal. But It does not offer
the same level of corrosion resistance of either 316 or 304
stainless steel. Passivation can improve the corrosion resistance
further.
Wings above drilling point provide clearance hole in wood piece so
it won't climb up the shank; wings break off as point contact the
steel substrate.
Specification
Type | Self Drilling Screw / Tek Screw |
Grade | SUS 410 (Martensite steel), Hardened |
Finish | Passivated |
Head Type | Flat / Countersunk Head |
Drive Type | Philips |
Thread Type | AB |
Diameter | #8 ~ #12, 4.2 ~5.5mm |
Length | 1" ~ 4", 25 ~ 100mm |
Standard | DIN, ANSI |
Stock | Unavailable |
Contact
If you're insterested in our stainless steel philips flat head
self-drilling tek screws with wings, please do not hesitate to send
us an email(sales@irolee.com) or call us at +8615867456779(Mob/Whatsapp/Skype) directly.
For stock, we suggest you double check from us before placing
order, thank you!