Please Note:
1. Not compatible with SATA MINI PCI-E SSD/PATA MINI PCI-E SSD and
RAID MINI PCI-E SSD..
2. The SSD work will release heat,the shell fells very hot,this is
normal.
3. Please don't try to use USB extension cable,and don't connect
the product on front USB ports of the desktop,because it will lead
to can't meet the demand of the normal working current of the SSD!
4. Please enter the disk manager to hard disk partition and format
the hard disk If you open "my computer" can't see the increase of
disk partitions.
• USB 3.0 to mSATA SSD 5x3cm mSATA to USB3.0 Converter Adapter NO
need USB cable
The MINI HDMI to SDI Converter allows HDMI signals to be shown on
SDI display while ensuring high bit rates of 2.970 Gbit/s to give
you high resolution signal without any loss. For professionals this
means that it is now easier to convert your high def HDMI signal
with audio to SDI for long distance transmission and display your
work on SDI display.
• Feature:
100% brand new and high quality
Supports 3*5cm mSATA SSD to USB 3.0 interface.
High end quality product with sleek case design .
USB 3.0 interface. Plug and Play.
Compatible with Windows 2000/xp/Vista/7/8/mac os 7.0 and above.
Demension: 7.8 cm*3.3 cm*0.7 cm.
Instruction Notice:
1. This product performance is being improved unceasingly, like has
the change, not separate informs even slightly.Pictures for
reference only, subject to our available products.
2. Not compatible with SATA MINI PCI-E SSD/PATA MINI PCI-E SSD and
RAID MINI PCI-E SSD.
3. Please note that the query rated current of SSD,compute maximum
power supply current is 1A of USB 3.0 interface,if the USB port
can't provide enough current to the ssd,the computer can't identify
or work can't well because the power supply can't meet
requirements;if such issues are within your computer USB 3.0
interface,please try to access USB 2.0 interface test it,because it
can reduce the speed to reduce power consumption.
4. The SSD work will release heat,the shell fells very hot,this is
normal.
5. Please try not to use USB extension cable,don't connect the
product on front USB ports of the desktop,because it will lead to
can't meet the demand of the normal working current of the SSD.
6. Please cancel the hard disk password if your hard drive set a
password in the original computer, The other computer doesn't
recognize the hard disk if the password not cancel.
7. Please enter the disk manager to hard disk partition and format
the hard disk If you open "my computer" can't see the increase of
disk partitions.
USB port can't meet the SSD rated current of the fault phenomenon:
A: Unable to identify the SSD, but adapter card not to install SSD
connected computers,the computer can identify new hardware.
B: Adapter card to connect the computer after constantly connected
and disconnected.
C: Products to connect the computer, can read data of hard disk
drive, but can't write data to the hard disk or format the hard
disk partition, as long as write data will disconnect or a computer
without any response (Hard disk has bad sectors will have this
phenomenon, please pay attention to distinguish).
About Mini PCIe SSD interface standard:
1.Mini PCIe interface defined there are six,A: mSATA Solid State
Drive,using SATA protocol;B: SATA MINI PCIE Solid State Drive,its
nature is SATA interface,but the pin definition is different
compared with mSATA solid State Drive; C: PATA MINI PCIE Solid
State Drive, its nature is IDE interface;D: Raid mSATA;E:3G or WIFI
module;F:Inter Turbo Memory.Six types of interface definition looks
exactly the same,so please be sure to distinguish your solid state
drive's interface definition.
2.Mini PCIE interface solid hard except has interface definition of
the difference, also has length of distinction: A: half high,
length 2.7 cm; B: full high, length 5 cm; C: length 7 cm, it is
only 3 cm * 5 cm size!