KATA Valve API 6D Swing Check Valve (Bolted Bonnet type)

A check valve allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Check valves work automatically and most are not controlled by a person or any external control; accordingly, most do not have any valve handle or stem.

Design Features
Seat
For carbon steel check valves, the seat material is usually forged steel. The sealing surface of the seats is spray welded with hard alloy specified by the customer. Renewable threaded seats are used for NPS≤10 check valves, and welded-on seats are optional. Welded-on seats are used for NPS≥12 carbon steel gate valves. For stainless steel check valves, an integral seat is usually utilized, i.e. by welding hard alloy directly within body cavity. Threaded-in or welded-on seats are also optional for stainless steel check valves, if required.

Body-Cover Gasket

Stainless steel + flexible graphite wounded gaskets are used for Class 150 and Class 300 check valves; stainless steel flexible graphite wounded gaskets are used for Class 600 check valves, a ring type joint gasket is used for Class 900 check valves; a pressure seal design is used for Class 1500 and Class 2500 check valves

Body-Cover Connection
The body and bonnet of Class150 to Class 900 check valves are usually connected by with studs and nuts. And the body and bonnet of Class 1500 to Class 2500 check valves usually utilize a pressure seal design.

A check valve, clack valve, non-return valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction.

Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Check valves are often part of common household items. Although they are available in a wide range of sizes and costs, check valves generally are very small, simple, or inexpensive. Check valves work automatically and most are not controlled by a person or any external control; accordingly, most do not have any valve handle or stem. The bodies (external shells) of most check valves are made of plastic or metal.

An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. Typically the check valve is designed for and can therefore be specified for a specific cracking pressure.

Heart valves are essentially inlet and outlet check valves for the heart ventricles, since the ventricles act as pumps.

Design Ranges of Materials
KATA cast steel check valves are designed and manufactured to provide maximum service life and dependability. All check valves meet the design requirements of American Petroleum Institute standard API600 & 6D.BS EN 13709 and generally conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a complete range of body/cover materials and trims. Standard body/cover materials include nine grades of carbon, low alloy and stainless steels, for special applications they can be supplied in other grades of alloy and stainless steel, there's a full range of trim materials to match any service optional packing and gasket materials are available for a full range of service conditions.

Available Modifications For KATA Steel Valves
Trim changes
End connection modifications
Packing and gasket changes
Operator mounting
Handwheel extensions Pressure equalizing
Customer specified coatings
Weld end bore changes
Oxygen & chlorine cleaning & packaging

A)Eyebolt
For 150Lb-8",300Lb-8", 600Lb-6",900Lb/1500Lb/ 2500Lb-4" & over. B)BC
Bolted cover. welded cover and pressure seal bonnet in services requiring frequent cycling or with high pressure/temperature variations. C)End Connections
A choice of flanged, RTJ flanged or buttwelding end for piping flexibility.
D)Body-to-Cover Joint
A male and female joint or tongue and groove joint is used 150Lb to 600Lb valves. Ring joint is used in the body to cover connection in 900Lb & higher rated valve. E)Outside Lever And Weight
All external hinge pin swing check valves 12" and smaller are available with an optional outside lever and weight, internal hinge available with all swing check valves. F)Seat Rings
Separate heavy duty, full ported rings for easy maintenance. Screwed or welded connectioninto body.
G)HCU weighted mechanical accumulator
This design can be used to either dampen or assist closing of the check valve disc depending on orientation. by using the hydraulic control unit to buffer action the disc, the valve opens at lower flow rates.

Kata Valve (Group) Co.,Ltd. is headquartered at Baoshan City Industrial Zone,Shanghai China, occupying over 35 thousands square meters and will be looking at other expansions in the near future. The registration capital of the whole Group comes to RMB 100 Millions. Also it is one of high-tech enterprises in Shanghai, a member of the Association of China General Machinery, and a regular supplier to China Petroleum & Natural Gas Corp,China Petrochemical,China Power,and China Sea Oil etc.

With an experience of about 30 years in manufacturing all kinds of valves,Kata specializes in disigning, making and marketing valves for all industries. Its products range from Ball, Butterfly, Gate, Globe,Check,Plug valves to Marine valves and other valves;nominal size from 1/2" to 48" (DN15 to DN1200);nominal pressure from 150Lb to 2500Lb (PN1.0Mpa to PN42.0Mpa); materials cover WCB, WCC, WC6, WC9, CF8, CF3, CF8m, CF3M, LCB, LCC, A105, 304, 316, 304L, 316L, F11, F22, LF2, F51, etc. The products are widely used in the fields of petroleum, chemical, metallurgy, power, fuel gas, city pipeline networks and so on. Certificated with ISO9001, API6D, CE/ PED, Kaitai has developed excellent quality control and management system.

Kata has a series of modern machines and equipments such as vertical lathes, drill press, milling lathe, grinding machine , other general machine tools and physical & chemical analysis & experiment devices. Also it has developed a well-trained and dedicated team including engineers,technicians and other employees. This allows us to offer customers quality product,competitive pricing and prompt deliveries. We always work hard to improve our existing products and pursue new ideas and ways to stay ahead of the ever changing market.