Add to Cart
1. Brief introduction
This set of equipment is mainly used in different kinds of casting roller, hot roller, cold roller, non-ferrous metal roller, whose surface can be protected to maintain a certain degree of hardness. As to the welding type, we often use submerged arc welding (SAW) or open arc welding. The work piece is held by 500 chuck clamping and overturning continues. The passive end is provided with a rotary top position. The operator can operate the machine easily.
2. The main parameters
1 | Workpiece surface diameter (mm) | Φ100-700 | 8 | lateral motor power (W) | 350 |
2 | Workpiece axle diameter (mm) | Φ250-500 | 9 | The transverse walk speed (mm/min) | 2-100 |
3 | Application of workpiece weight (Tons) | 5 | 10 | The welding head up/down distance by motor (mm) | 350 |
4 | Application of workpiece length (mm) | 100-4000 | 11 | Left/Right distance by hand (mm) | 100 |
5 | Jaw chuck | 500 | 12 | Front/Back distance by hand (mm) | 100 |
6 | Main Rolling motor (KW) | 2.2 | 13 | Power supply (may be customized) | 3P 380V 50Hz |
7 | Spindle speed (rmp) | 0.05-1 | 14 | Welding type | SAW or Open arc welding |