Add to Cart
Durable Green 0.8mm PVC Outdoor Inflatable Bumper Ball Zorb Ball For Adult
Specifications:
Material | 1.0 mm transparent PVC |
Size | 1.8 m diameter or 1.2 m diameter and 1.5m diameter customized as well |
Color | Red Transparent or any colors is can be customized |
Weight | About 23 kg |
Accessories | one proper pump and repair kits |
OEM | Any sizes , colors , logo can be produced based on your needs |
Descriptions:
Inflatable Bubble Ball also named bubble soccer, human bubble ball, bubble football, bumper ball, loopy ball, etc., usually has 3 different sizes: 1.2m for kids. 1.5m for adults and 1.8m for tall people.
Human soccer bubble is a sealed game with anchors and rope structure, welded by hot sealed welding machine. Theer aer two safety belts and two handles in the inside circle. Players can go inside, wearing the safety belts and carry the handles, and then:
1 person can roll on grass or ramp. 2 persons can bump and fight; 5 persons can make a war 11+ persons can play with football, you will enjoy how funny and clumsy the players are.
As for this bumper ball , It is made of 1.0mm transparent PVC , Its fixed width is 1.2m , can be waterproof and has a very good light transmission , with CE,EN14960,SGS,EN71,ROHS certificates . It is usually used to produce water ball , zorb ball , water roller , bumper ball and transparent tent . Don't worry , all our materials are purchased from best supplier , Plato factory , good quality and durable .
We also can use TPU to produce bubble ball , Actually , the quality of PVC and TPU is more or less the same , of course , they have some natural differeces as follows :
Advantage:
1. As for this bumper ball , It is airtight type , you only need to inflate it one time by using air pump connecting electricity . It can be inflated about 1 minutes .
2.Workmanship : For bumper ball , we can see from the following picture , there are a lot of ropes connecting D rings on two sides to form a air layer , don't worry , our factory usually install enough D rings , to bear a very big impact force , good quality and durable , Actually , it is welded by 10 pieces PVC material , we usually reinforce all the seams , to make it stronger .
Repair Guidance:
1. Find out exactly where the leak is. Fill a spray bottle with a
mixture of soap and water and spray it liberally on the bubble ball
along the seams. You will notice that the solution starts to bubble
up where the leak is located, so take note of the position of the
hole.
2. Prepare the hole for patching. Dry the seam off, and make sure
that it is completely deflated before attempting to patch the seam.
If you have the patch kit that came with the ball, you can use the
prep solution to thoroughly clean the material (PVC) before
proceeding. Rubbing alcohol also works.
3. Apply plumber's glue to the seam and let it dry for about 15
minutes. If possible, apply some glue to the inside of the seam as
well, so that it spreads out and gives an extra layer of protection
when the bubble ball pressurizes.
4. Fill the bubble ball about halfway with air and wait another 30
minutes or so to make sure that the glue has dried completely.
5. Inflate the item completely and spray it again with the soap and
water mixture to make sure that the hole is indeed fixed.
Pictures :