Two Person High Speed Cleanroom Air Shower / Chamber For Beverage Industry / Animal Lab

QS Standard Two Person Clean Room Air Shower For Beverage Industry

Quickly detail

External Size: 1590x2000x2180mm

Internal size :1190x1930x1910mm

Purification rank: Class100

HEPA filter efficiency: 99.999%@0.3um

Personal per cycle: 2-8 person

SUS nozzle: 56 pcs

Blower way : three side

Air speed :>25m/s

Power: 380V/50HZ or 480V/60HZ

Company information :

Air shower are units which are used in cleanrooms in the fields of micro-electronics, semi-conductor production, airbruch painting, pharmaceutical and food industry, to remove dust from the outer surfaces of operator's clothing before entering the clean and dust-free area.

This thorough dust removal effect is obtained by special aluminium jets which blow filtered air at high speed (more than 25 m/s) to the clothing of the operator. In this way dust particles, powder residues and other particles are removed by the air which flows from different directions (even from above) against the operator. The air is then drawn downwards due to the light negative pressure against the surrounding air and is recirculated through G3 prefilter grid. After being treated by the G3 prefilter and high efficient HEPA filters the air is recirculated into the shower again. The resulting clean air corresponds to ISO 5 class quality as per standard ISO 14644-1.

Construction:

The entire housing of the air shower is of stainless steel AISI 304L 4B (Scotch Brite). The doors are of laminated safety glass, thickness 8 mm, evenly mounted to the housing (without unsightly aluminium frame), one in front of the other or centrally mounted, electro-magnetically counterlocked opening system allows opening after each dedust cycle. Handles of stainless steel.

Ventilation:

Centrifugal double-suction ventilator, nominal airflow rate 2.400 m³ / h at working pressure of 1.600 Pa.

Filtration:

1 ea. HEPA-Filter, class H14 with high pressure output, according to CEN EN 1822 and 2 ea. class 3G coarse dust prefilter. Access to the filters for exchaning is from the inspection panel above the shower. The prefilter panels are fitted with a rapid-lock system (without screws).

Pressure control:

With analogue Dwyer manometer for supervising the differential pressure at filter surface.

Air jets:

The air is blown through adjustable aluminium air jets into the shower chamber with internal butterfly valve to regulate the air output. The airspeed is manually adjustable in a range of 20 to 30 m/s.

Reduced airspeed:

The air speed reduction starts automatically after each cycle.

Warranty:

Our equipment is warranty for 1 year excluding consumable parts and accessories.

All equipment is shipped with a comprehensive use’s manual complete with a report documenting all test procedures.

Additional IO/OQ/GMP document is available upon request.

Contact our sales representative for specific warranty details or document request.

Consumable parts illustration:

1: Pre-filter: each one should be replacement in each 6 month, but it can refresh no more three times.

2: HEPA filter: each one should be replacement in each half and one years.

Keling Purification Technology Co., Ltd engaged in air purification field for many years, that is

Professional manufactory with research and development, produce, sales of air purification equipment and HVAC air filter.

our product concern the follow range:

1: Clean room equipment: clean room Air shower, Pass box,Duct HEPA filter box Dynamical pass thru, Laminar flow bench, fan filter unit, DOP air HEPA unit, Dispensing booth, sampling booth, laminar flow booth , soft wall clean room , air cleaner , laminar flow ceiling unit. Laminar flow wardrobe .

2: HVAC air filter: ULPA air filter, Mini-pleats HEPA filter, HEPA filter with clapboard filter, high

temperature-resistance filter, pocket air filter, V-cell air filter, pre-filter, active carbon air filter,

v-bank air filter with big air volume, bag air filter, panel air filter, z-line air filter and Grease filter.

3: Hard wall clean room project, such as design, construct and monitor service and raw material supply.

Our product service for biological, food, chemical, medicine, electronic, micro-electronics,

skin care, precise instrument industry and Aero-Space, laboratory, scientific, national defense area

and so on , Our product have good reputation in worldwide ,our client spread all over European

and Southeast Asia.

We have excellent technical team pursue the high quality to exist, insisted concept of credit for in sustainable development

We sincerely hope establish steady and friendly business relationship with you.

You will achieve what are you want!

Trust me! I will be your finally choose !