Silicone Rubber 2 x 1m Swimming Pool Control System Solar Heater Control Sun Maxi Panels

Silicone Rubber 2 x 1m Swimming Pool Control System Solar Heater Control Sun Maxi Panels

A good pool heater has:

Swimming pool solar panels/collectors - the part that heats the water and is circulated

Filter- removes debris before water is pumped through the panels

Pump - circulate s water through the filter, the panel, and then back to the pool

Solar Controller - automatic monitors the pool water temperature and the solar system.

Your pool water is pumped by the filter and goes through the solar panels where its heated before returning back to your pool

Necessary Installation Site Conditions

The number of pool solar panels required to properly heat your swimming pool solar heater will mostly depend on a few factors: The surface area of your swimming pool water temperature which you want to maintain shade area of the pool. Direction of the swimming pool solar heaters.

A good rule of thumb: whatever is the surface area of your pool, you'll need about 50% of that for swimming pool solar panels.

Example: Say you have a pool that measures 20' x 35', multiply 20 x 35 and you'll have 700. Your surface area is 700 sq.ft. You multiply 700 x 0.5(50%) and you get 350 sq.ft. of panels.

One solar heating project should need:

1. panels- to see your pool size

2. solar controller-1pc

3. stand for panels(if your roof has angle that would not need), one stand can for 2pcs panels

4. hook-up kit(1-2 sets)

Features:

* Modular panel system

* 15 year Pro Rata Warranty Panel

* 100% bird proof

* Each panel is equal to approx. 6m2 of pool surface area

* Can be installed on all roof surface

* Wind and chill resistant

* Complete with roof fittings

Guangzhou Yicheng Fountains & Pools Equipment Co., Ltd.