Halco DTH

Halco DTH Hammers Selection Guide for High Frequency overburden drilling

The Mach 60 is a general purpose hammer suitable for all rock conditions at a wide range of air pressures. The hammer is fitted with a reversible cylinder to prolong service life.

Mach 60 is versatile and reliable, requiring only a few simple tools for servicing and maintenance. Mach 60 is very economical to operate due to its relatively low air consumption and has a unique Mach 60 shank for full bit support. This hammer is most suited for use with the Sim-Cas Overburden system because of the high frequency of the piston/cycle.

Suitable for operation at air pressures of 100 - 435 psi (7 - 30 bar).

Drilling diameters of 152 mm - 216 mm (6 - 9 5/8").

Available Shanks: Halco Mach 60.

MACH RANGE This is a proven hammer that has been around for over 30 years and is designed for all kinds of drilling conditions but excels in overburden drilling due to the high frequency with less blow energy for drilling through unstable ground conditions. This hammer can drill smaller diameters than the standard range. This range of hammer is ideal for civil engineering.

DOMINATOR RANGE The Dominator is a higher performance hammer than the Mach Range ideally suitable for medium to higher air pressures in blast-hole applications. This design is simple with fewer components, which makes servicing and on-site maintenance easy. With a range of heavy duty models on offer this extends the life of the hammer considerably.

SUPER DOMINATOR RANGE The Super Dominator is the latest hammer in the range, specially designed for working at extreme high working pressures up to 500 psi with high penetration rates ideal for blast-hole and waterwell applications. The Super Dominator Range has a simple design with no make-up required. This hammer has an external non-return-valve for easy inspection and service and is available with a 12 spline drive system to reduce shank breakage.

GW RANGE The new GW series of DTH hammers from Halco Rock Tools offer breakthrough performance in challenging Geothermal and Waterwell applications. The robust non ported piston design dramatically improves both the piston and internal component life when drilling under a column of water. A built in choke facility allows the driller to adjust the volume of air through the hammer to optimise cuttings evacuation. GW500 and GW600 hammers are fitted with a reversible cylinder to maximise operating life and are suitable for operation at air pressures up to 30 bar (435 psi).

AVAILABLE SHANKS:

Dominator 100
DHD 3.5
Mach 50
Mach 60
Mach 80
SD 10
QL 120
Mach 20
SD 450
SD 5
SD 6
SD 8
DHD 112

Mach 303
Mach 44
DHD 350R
DHD 360
DHD 380
DHD 112S

MD 3.5
DHD 340A
QL 50
QL 60
QL 80
SD 12

DTH Button Bits Mission 40 140mm Down The Hole In Australia Mining For Well Drilling

DTH Button Bits
Diameter: 57mm-660mm
Application: Well drilling, Ore ming, Coal mining
Shank of Bit: DHD,COP,Mission,SD,QL,TD,BR
Basic Bit Designs: Convex, Flat front, Speed Bit, Concave, Rocket Bit

DTH BUTTON BITS

HIGH PRESSURE DTH BUTTON BITS
Shank: DHD3.5, DHD340A, DHD350R, DHD360, DHD380, QL40, QL50, QL80, COP44, COP54, COP64, COP84, SD4, SD5, SD6, SD8, Mission 40, Mission50, Mission60, Mission80, Mach 33, Mach 44, BR2, BR3, BR4, Mach 50, SD10, SD12, DHD112, Numa 120, Numa 125.
Diameter: 76mm-550mm.

DIFFERENT FACES STYLES:

Flat face: This is an universal design, especially for hard and abrasive rock formation. So typically, flat face with hemi-spherical buttons design is the most popular choice.

Convex face: A classic design for soft to medium hard rock formation which is not so abrasive. This design have very excellent penetration rate but poor in hole deviation if rocks are hard.

Concave face: Medium hard to hard rock formations which is less abrasive and fractured. Especially for deep hole drilling, excellent control over hole deviation.

DGR face: A special design for hard or very hard rock conditions, double gauge row buttons provide very excellent ware-resistance and very longer life time. It is usually used for some bigger diameter DTH bits. Besides, we are manufacturing the DTH bits with various shanks so they can be compatible with different DTH hammers

RECOMMENDED DTH BITS AND DTH DRILL PIPES:

Bit Size: 3.5"/3", DTH Hammer Bits Shank Types: COP34, DHD3.5, MISSION30 BR3, Recommended Bits: 90mm-105mm
Bit Size: 4" DTH Hammer Bits, Shank Types: DHD340, QL40, MISSION40, SD4, Recommended Bits: 110mm-130mm.
Bit Size: 5" DTH Hammer Bits, Shank Types: DHD350, QL50, MISSION50, SD5, Recommended Bits: 134mm-152mm.
Bit Size: 6" DTH Hammer Bits, Shank Types: DHD360, QL60, MISSION60, SD6, Recommended Bits: 152mm-203mm.
Bit Size: 8" DTH Hammer Bits, Shank Types: DHD380, QL80 MISSION80, SD8, Recommended Bits: 203mm-305mm.
Bit Size: 12" DTH Hammer Bits, Shank Types: DHD112, SD12, QL120, Customer Tailor-made.

DTH Drill Pipes:

Diameter: 60mm, 76mm, 89mm, 102mm, 114mm, 140mm, 146mm, 168mm,
Thread Sizes: 2 3/8" API, 2 7/8" API, 3 1/2" API, 4 1/2" API.
Wall Thickness: 5.5mm, 6.5mm, 8.5mm, 10mm, 11mm, 19mm, etc.
Length: 1000mm- 10670mm
P.S: All DTH drill pipes are friction welded.

FAQ

The information about dth drill bit you may like to know before order:

1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight

2. Handling time for an order
Based on order quantity, normally it takes 20 days for production.
in 3 working days after receiving the advance payment

3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.

4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.

5. After Services:
a. Our sales team will response for your question within 24 hours (Holidays Excluded)
b. Technical Support will be available in any time

6. Quality & Service:
A. There will be strict inspection and testing for every order before shipping out.
B. Our sales team and Technical Support will response for your question within 24 hours through skype: ROSCHEN.TOOL and WhatsApp/Wechat: +86-13764195009
C. Free replacement will provide once the failure confirmed caused or our product quality.

For more information, please contact:

ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 6419 5009 ; +86-135 8585 5390

WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390

Email: roschen@roschen.com ; roschen@roschen.net

Website: http://www.roschen.com ; http://www.roschen.net

http://www.roschen.cn ; http://www.roschendrill.com

http://www.roschenmining.com ; http://www.roschendrilling.com

http://www.roschengroup.com

ROSCHEN GROUP

ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mineral tools, equipment products quality stable and reliable.

ROSCHEN Group Limited is a manufactory with years of research and development for the mining, mineral tools, equipment. We are capability to produce high performance world class products and control excellent quality. Our main product includes tricone bit, diamond core bits, drill pipe, core barrel, TCI tricone bit, mill tooth tricone bit, RC hammer, DTH bit, etc.

ROSCHEN Manufactory PROCESS

ROSCHEN Sales Value Growing Up!

ROSCHEN'S MISSION

1. Strive to create and supply Best quality products for the industry that last longer than the average products.

2. Provide excellent service for our clients. 24 hour-7 days /week schedule to get our clients what they need – FAST.