HV HV3 NV NV3 PV PV3 Conventional Diamond Core Barrel for exploration drilling

HV HV3 NV NV3 PV PV3 Conventional Diamond Core Barrel for exploration drilling

Conventional Diamond Core Drilling

Conventional Core Barrel Complete

Conventional core barrel 1.5 meter , Conventional core barrel 3.0 meters

Conventional core barrel 5 ft / 10 ft 1.5 meters / 3.0 meters for exploration core drilling

Conventional Diamond Core Drilling Conventional core barrel 5 ft / 10 ft for exploration core drilling

Conventional Diamond Core Drilling HV HV3 NV NV3 PV PV3 Conventional Core Barrel Complete for exploration core drilling

Conventional Diamond Core Drilling

Core Drilling | Excavator Hire

ROSCHEN have the capability to carry out diamond core drilling in various diameters - to depths up to 450m.

NLMC = 47.6mm diameter core, resulting in a 75.7mm diameter holes.

HQ = 63.5mm diameter core, resulting in a 96mm diameter hole

4C (Equivalent to PQ) = 85mm diameter core, resulting in 122.6mm diameter hole.

Core drilling is different to other drilling techniques in that a solid core of rock rather than cuttings is extracted from the hole. The diamond drill bit comprises a short steel shank with a cutting head using natural ("surface set") or man-made ("impregnated") diamonds as the cutting medium. In softer sedimentary formations and often coal, other cutting elements are used such as tungsten-carbide and polycrystalline diamond compacts (PCD). Water is the usual circulation fluid used to remove the cuttings and cool the drill bit.

As the drill bit advances, a cylindrical core of rock progressively fills a triple tube core barrel (double tube barrels are also used by some companies) immediately above the core bit. Core samples are periodically recovered, (ROSCHEN use 3.0m long core barrels,) at the end of the core "run" the complete barrel and the drill rods are pulled from the hole, the end of the barrel is disassembled by removing the core bit and catcher, the the stainless steel splits are then pumped out of the inner barrel by using high pressure water. The splits are then opened to reveal the core in virtually undisturbed condition.

Rotation speeds during diamond core drilling can vary from 150 to 400rpm for surface set bits, to more than 1500 rpm for impregnated bits. Penetration rates are much slower than other methods generally due to the hardness and at times the weakness of the rock, plus the time taken to retrieve the core barrel when drilling at deeper depths. An alternative to Conventional core drilling is wireline core drilling this can speed the drilling progress up especially when drilling deeper holes -

Wireline Core Drilling

ROSCHEN also have the capability to carry out wireline core drilling.

Wireline core drilling is the same principle as conventional core drilling whereby a solid core of rock is collected within the core barrel, the difference is how the core barrel is retrieved from the borehole. When the core barrel is full or the run is finished instead of the complete drill string - rods and core barrel being pulled from the hole, the core rods and outer core barrel remain in the hole and only the inner core barrel is retrieved by lowering a cable with an overshot down the core rods. The overshot attaches to the top of the inner tube/barrel of the core barrel and then the assembly is winched to the surface. The inner barrel is disassembled and the core pumped from the inner barrel as is done in conventional core drilling.

Wireline core drilling requires a completely different set of gear - bits, rods and associated tooling to that used for conventional core drilling which is not generally carried with the rigs at all times - please let your ROSCHEN contact know if you require wireline core drilling prior to mobilisation to site.


Specifications:

DCDMA sizes B, N, H, and P.
T2 56mm, T2 66mm, T2 76mm, T2 86mm, T2 89mm, T2 101mm, T2 116mm, T2 130mm

AQ, BQ, NQ, HQ, PQ/ BQ3, NQ2, NQ3, NQTT, HQ3, HQTT, PQ3, PQTT, T2 46, T2 56, T2 66, T2 76, T2 86, T2 101, T6 86, T6 101, T6 116, T6 131

NMLC, HMLC, LTK48, LTK60, BGM, NGM, ADBG, TBW, TNW, ATW, BTW, NTW, NXD3, AX, NX, NXC, AXT, T6H, 4 9/16, NWD4, 412F, SK6L146, TT46, TB56, TS116, CHD101,

AW, BW, HW, NW, PW, SW, ZW

ROSCHEN GROUP

ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mineral tools, equipment products quality stable and reliable.

ROSCHEN Group Limited is a manufactory with years of research and development for the mining, mineral tools, equipment. We are capability to produce high performance world class products and control excellent quality. Our main product includes tricone bit, diamond core bits, drill pipe, core barrel, TCI tricone bit, mill tooth tricone bit, RC hammer, DTH bit, etc.

ROSCHEN Manufactory PROCESS

ROSCHEN Sales Value Growing Up!

ROSCHEN'S MISSION

1. Strive to create and supply Best quality products for the industry that last longer than the average products.

2. Provide excellent service for our clients. 24 hour-7 days /week schedule to get our clients what they need – FAST.