Add to Cart
Highway Toll Gate DC24V Motor Parking Barrier Gate With Round Barrier Arm
Product Display
Technical Specification
1 | Product Name | Highway Toll Gate DC24V Motor Parking Barrier Gate With Round Barrier Arm |
2 | Rated Volatge | AC90V~AC264V,DC24V,50/60HZ |
3 | Speed Time | 0.3s,0.6s,0.9s,2s,4s,6s |
4 | Motor Power | 50W,max 100W |
5 | Boom Length | 2meter to 6meter(max) |
6 | Working Temperature | -40℃~85℃ |
7 | Housing Size | 342*312*959*2mm(L*W*H*TH) |
8 | Lifetime | >10 million times or 10 years |
9 | MTTR | <0.5hour |
10 | MTBF | >5 million times |
11 | Protection Grade | IP68 |
12 | Remote Controll Distance | ≤100 meter |
13 | Motor Speed | 3000 r/min |
14 | Relative Humidity | ≤90% |
15 | Running Noise | <50dB |
16 | Net Weight | 42.6KG |
17 | Application | Parking Lots, Toll Gates, Goods Yards, Railway Crossings,Commercial
Premises, Apartment Block Access |
Motor Details:
Advanced Functions:
1. Gate automatically open when power off, no clutch design, no need
human intervention. When power on,
gate automatically reset, restore to the gate closing state, truly
unattended, fire safety standards. If special
requirement, manual operation is required when power off, operating
arm open and close manually also can
be realized by setting up control board DIP switch, which ensure
that the system can be used at any time.
2. The use of Single Compression Balance Spring device, good
regulation, no noise, indefatigable, not easy
to break, safe and reliable.
3. A variety of input and output modes can be selected, normally
open normally closed are optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent
place to install.
5. Closing speed can be adjusted.
6. Barrier gate up &down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the
gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. R&G Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared
sensor signal anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function. No matter the current
gate in what state, the operator through the
triple push button, software or remote control to issue an open
command, the gate will give priority to the implementation of the
opening action.
13. Barrier with anti-collision protection function, when the
vehicle hits the gate arm, arm can be swing out to
avoid damage to the vehicle, and barrier gate machine.
14. Delay closed selection function.
15. High-sensitivity arm auto reverse function (intensity can be
adjusted).
16. Parking system interface.
17.RS485 or RS232 network communication control up &down
interface (no need to install communication module)
18. Anti-collision alarm signal interface.
19. Adjustable speed port (from 0.9s to 10 s)
Packing List:
Title | Specification | Qty | Unit | Note |
Barrier gate boom | 1 | Piece | ||
Machine case press board | 2 | piece | For fixing case | |
Expansion bolt | M16X150 | 4 | set | For fixing case |
Supporting pole | 1 | piece | Optional part | |
Expansion bolt | M8 | 4 | unit | For fixing boom |
Boom fixed screws | M12*70 | 2 | unit | |
Case Key | 2 | unit | ||
Balance spring | 1 | unit | For spare usage | |
Remote controller | 2 | unit | ||
Machine control | 1 | unit | Optional | |
Instruction | 1 | piece |
RFQ:
A: Follow the steps on below to complete your order.
- 1. Inquiry
Provide us detailed information about your requirement, and we'll
recommend the suitable products according to your request
-2. Quotation
Official quotation form with all clear specifications according to
the order
-3. Invoice
Invoice will be issued once the quotation is confirmed.
-4. Payment
Payment shall be issued once the invoice issued. Full payment is
acquired.
-5. Production
Bulk production shall be taking 15-25 working days.
-6. Delivery
by sea, air or courier. Detailed picture of package will be
provided upon the service you've chosen. Packaging info will be
sent upon confirmation.
Why choose us:
1. Our Factory has 8 years OEM/ODM experiences in the line of
barrier gate.
2. Prompt delivery time. Usually we keep stock of standard model
which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample and test it
before bulk order.
5. Online technical support makes it carefree to be our business
partner.
6. A variety of transportation for your choice. Sea shipment, air
cargo or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly
welcome to visit our factory.