Durable Hydraulic Tank Turning Rolls HGK Series High Pressure
This fit up rotator many used for cylinder (or small angle taper)
1+1 fit up welding, it adjusting the vessel position through
hydraulic cylinder, thus to realize vessels fit up, and the
finished vessel transport to backward, then loading to another
section vessel, and welding inner and outer cycler seam welding,
and so on, finishing the whole length tank welding. It’s the ideal
equipment for improve production efficiency and ensure high
quality, as well as reduce labor strength. Consists by one set fit
up rotator, one movable rotator, hydraulic pump station.
Two in one fit up station characteristic: fit up the two vessel
through hydraulic, thus weld the two vessels together. one set fit
up rotator consists by two independent fit up rotator, one fit up
rotator and idler rotator putted on the same seat frame, and under
frame with wheels, and it can adjusting the distance between two
vessels through oil cylinder, when fit up, one section vessel
putted on them, and another fit up rotator fixed in the center of
big seat frame, the drive rotator located at the other side, it
with manual traveling device, and the other section vessel putted
on them, thus the two vessels fit up firstly through hydraulic oil
cylinder bowse in the the distance between two vessels, then
adjusting the hight of the vessel to realize the fit up.
The hydraulic fit-up rotators are usually used for fitting up of
wind towers / cone pipe assembly welding because of the diameter
difference between two sides of the pipe. We have to change the
position of the pipe in one end to make the central axes line is in
horizontal level, then, the pipe or tank can be rotate smoothly.
Hydraulic adjust the center to center spacing of roller group, in
accordance with the diameter variations of work piece.
Max. loading :
Roller dia. X width:
Pump station pressure:
BEIJING HUADE REXROTH
● Inverter and Main electric elements are Siemens/Schneider or
● Motor is UK brand Invertek.
● VFD rotary speed control, improving the reliability of operation.
● Steel or PU roller which can ensure a long time using (at least 2
● With lubrication system.
● Accept testing before delivery.
● Accept special design and custom.