Auto Carbonated Soft Drink Filling Machine Aseptic For Beverage Bottle

Cola drinks making machine

1. Products: Cola drinks making machine

2. Model:DGCF24-24-8

3. Production capacity: 6000-8000bph

4. Main material: SS304

5. Mitsubishi PLC control

6. Origin: Jiayuan

7. Certificate: CE&SGS

Auto Carbonated Soft Drink Filling Machine Aseptic For Beverage Bottle

Description:

1). Compact structured, good-looking, and easy to operate and highly automated.

2). Air conveyor is directly linked with feed-in starwheels, making it easier to change bottles without screws and conveyor chains.

3). Bottles are transferred in the manner of clamping neck. Bottles can be changed through some replacement of steel clamps, which instead of adjusting the height of machine.

4). Rinser-clamp which special design is strong and endurable, no contact with bottle-mouth, to prevent pollution.

5). Highly effective spraying nozzles equipped on the rinser-clamp can rinse every side of inner bottle and save water.

6). Accessories which contact with material are all made of stainless steel, no dead angles and easy to clean up.

7). Replacement between CO2 and O2 ensure almost no O2 in bottle, long filling pipe reduce O2 content to null.

8). Valve on-off system is driven by hydraulic cylinder, which starts on bottle signals.

9). High-speed and highly accurate bottling valves ensure no loss of liquid at high speed.

10). Equipped with CIP clean-in-place.

11). Bottom splint which fixed in the feed-out starwheel goes down in the manner of screw. Bottles can be changed without adjustment of height of conveyor chain.

12). Capping heads are magnetic constant-torque equipped to ensure capping quality with no damage

13). Highly effective cap sorting and feed in system is protective for feed in and cap absence.

14). Equipped with overload system to safeguard machine and operators.

15). Touch screen operation.

16). Main electronic components (touch screen, PLC and frequency inverter) are imported products.

17). Components of pneumatic system are FESTO.

Applications:

DGCF Washing, normal pressure Filling, Capping 3-in-1 unit is a new type self-developed equipment, which bases on years’ usual practice and adopt the advanced technology, and absorb many clients’ views. It meets the client’s requirement about filling different bottle size through one set. The suspension card bottleneck is adopted to make changing the bottle size more convenient. It can deliver the bottles automatically by blind and then washing, drying, filling, covering, capping by order automatically. This equipment employs frequent and speed adjustment system so that it can adjust the speed freely and enable the operation user-friendly. This machine is mainly used in washing, filling and sealing for gas beverage (soda water, cola).

Specifications:

Cola drinks making machine

2.

Bottle washing machine

Bottles are bellowed into bottle shifting wheel by air conveyor, and when the flushing clamp reaches the position of bottle neck, the jaw will hold the bottleneck. Under the guide of leading rail, the bottle will be overturned to 180°into an up-right position, and then transmitted into filling position by secondary bottle shifting wheel.

Bottle filling machine

The Filling Part is mainly composed of the filling valve, the switch valve and filling transmission components. The finish-washed bottle is conveyed to filling position by the bottle shifting wheel. At the same time, the valve-opening mechanism will open the filling valves, which with bottle on it, to fill gas in it and then the machine begin to fill liquid. When the liquid level reaches the ration tube, it will stop filling. After closing the valve and finishing exhausting, the neck holding planet of the filling device will clamp the bottle and move down into the capping shifting wheel.

Bottle capping machine

The capping part is composed of 3 sets of screw head, capping transmission part, cap unscrambler, under cover tube and sleeving cover part. Filled-finish bottle will be conveyed to the capping position by the bottle shifting wheel. When the bottle passes the sleeving cover device, the bottle mouth can hung on the cap on the cap output part. And the cap from the sleeving cover will be sleeved on the bottle mouth, and then be planished by the tongue depressor. The cap screw head, which the torque has been adjusted on it, descends when it moves on the same straight line with the bottle, and the triplet cap ring gear will be sleeved on the bottle cap and move down.

Component

PLC: MITSUBI

Frequency converter: MITSUBI

Contactor: DELIXI

Circuit breaker: DELIXI

Touch screen: WEINVIEW

Pneumatic system: Airtac

Proximity switch: Omron

Optoelectronic switch: Omron

Competitive Advantage:

We Zhangjiagang Jiayuan machinery co.,ltd

Please find our products through Zhangjiagang Jiayuan Co.,Ltd in Google, Baidu, Yahoo, Alibaba.com etc

Enquiry: Contact us by email, phone call, fax, Instant Messenger (Trademanager, MSN, Skype) and let us

know your enquiry.

Discussion: Specify the items you desire, confirm specification.

1. What kind of products will you produce?

2. What is the capacity (per hour) you want?

3. What kind of package, plastic bottle,glass bottle : volume ,height ,neck diameter ,diameter of bottle or

other please inform us of details .

4. Sole machine or whole production line.

We Zhangjiagang Jiayuan machinery co.,ltd can offer you:

Your inquiry related to our product & price will be replied within 24hours

Well-trained & experienced staff is to answer all your inquiries in English and Chinese

Working time: 24hr/day, 7days/week (UTC+8).

Your business relationship with us will be confidential to any third party.

Good after-sale service offered, please get back to us if you got any questions

Zhangjiagang Jiayuan Machinery Co., Ltd. is located in Zhangjiagang city, which is near to Shanghai.

We professionally research, develop and manufacture beverage packaging machines. We are a high technology enterprise of Jiangsu Province, and the best supplier of China beverage packaging machinery area.

Since its founded 20 years ago. We are dedicated to the most advancement technology of beverage packaging machinery, and have always been conducting good up-to-date technical communication and exchange with leading Italy, Germany, France packaging companies.

We have a strong technology team for beverage packaging machines’ manufacture. There are many beverage experts in our company. We provide marketing analysis, project budget, equipment technical configuration, and training for operator etc.