登录 | 免费注册 | 提交网站 | 免费看询盘 | 外贸旺站免费建站 | "贸易通"多语言推广 | 外贸论坛
Hot Products:
Home > Electricity Generation >

Low Water Head 60kW Micro Kaplan Turbine Genreator 500r / min 1x1.65m³/s

Low Water Head 60kW Micro Kaplan Turbine Genreator 500r / min 1x1.65m³/s

Brand Name: FUCHUN
Certification: CE, IEC
Model Number: ZDT03-LJZ-70
Minimum Order Quantity: 1
Delivery Time: 2 month to 12 months
Payment Terms: L/C, T/T, Cash
Fuchun Industry Development Co.,Ltd. Shenzhen
Verified Supplier
Shenzhen Guangdong China
Business type: Manufacturer Exporter
Room 1125, Noble plaza, Qianjin 1st Road Baoan district, Shenzhen, China
Supplier`s last login times: within 33 hours

Low Water Head 60kW Vertical Micro Kaplan Turbine Genreator / Cross Flow Turbine


1. Basic Data

Item

Parameter

Capacity

1x60KW

Rated Head

4.58m

Rated Flow

1x1.65m3/s

Micro Kaplan Turbine

Turbine Type

Vertical Kaplan Turbine

Turbine Modle

ZDT03-LJZ-70

Rotation Speed

500r/min

Spiral Case

metal

Runner Diameter

70cm

Runner Material

Stainless Steel (06Cr13Ni4Mo)

Cooling Way of Bearing

Water Cooling

Hydro Generator

Generator Type

Synchronize, Vertical

Generator Modle

SFZ75-12/740

Rated Voltage

400V

Rated Power Factor

0.8 (Lagging)

Frequency

50 Hz

Insulation Class

F/F

Braking Way

manual

Excitation system

brushless

Auxiliary equipmentmain inlet valve, governor, panels and so on

Any other sizes are available according to customers' special requests.


2 Brief Introduction

2.1 Model Explanation:

ZD: Hydro turbine model

T03, 560: Rotor model

L: Shaft configuration

J: Metal Spiral

H: Coagulation Spiral Case

71: Rotor diameter

2.2 Collection Type:

Direct collection, rigid coupling connection or same shaft with motor


3.Hydro Turbine Configuration

This series turbine is axial flow hydro turbine fixed pulp:water comes from intake,forbay,trash rack,and valve into the water charmer,pass the wicket to the runner.Then generate power by rotation.The tail water enters the tailrace channel.

When the load changes,adjust the overflow capacity by water guide mechanism .This will make sure the unit run under rated speed.The governor will control the open and close of the water guide mechanism.

3.1 Rotation Part

The discharge cone is fixed with nut to the lower part of rotor.The surface should be flat.

Rotor use taper to collect with motor shaft.There is wear sleeve between shaft and guide bearing.And it could be changed.

water guide mechanism function: Form and change the flow required by the hydro turbine.This will adjust the flow to meet the load.Close or open the water flow to start of stop the unit.

3.2 Guide Bearing

Water lubricated rubber bearing has a simple structure, has a certain vibration absorption, and the guide bearing can be close to the wheel, improve the stability of the unit. Using circular rubber tile structure, with water lubrication, water pressure should be maintained at 1-2kg/cm2, the amount of water is not less than 3m3/ hours. For the average annual sediment concentration less than 0.1kg/ m3 hydropower station, can directly use water from forebay for cooling and lubricating; when hydropower station with sand content higher than 0.1kg/ m3, it is better to set the filter, water is filtered and goes into the guide bearing (or other water source). The upper part of the guide bearing is sealed with a pressure flange.

The turbine radial and axial thrust bearing are mounted on the motor (see motor manual)

3.3 Governor Mechanism

The machine is an automatic governor (see the specifications for the governor).


Kaplan Turbine and Generator

turbine.jpg generator.jpg manufacture.jpg


Governor

governor.jpg governor2.jpg

Inlet Valve Electric Panels

valve.jpg panels.jpg


Company Information


Fuchun Industry Development Co., ltd Shenzhe is an experienced manufacture and engineering Company in small scale hydro power equipment ( 50Kw to 50Mw). We play the role of manufacture and EPC contractor and could supply water to wire equipments and services.

We provide customers with the complete package, from the design and manufacture of the turbine, generator and control equipment through to installation, commissioning and ongoing repair and maintenance.

1.Water Turbine Generator Unit Design & SUPPLY
2.Hydropower equipment supply
3.Feasibility study of hydropower project
4.Manufacture
5.Installation & Supervision
6.Commissioning and Training service
7. Hydro power plant rehabilitant

8. Hydro power plant spares supply
9.Services


Prominent Design

Professional Service

Prime Products

Prestigious Manufacturer


 .JPG
Our factory occupies 560,000 square meters of land,which inculdes 18 workshops,over 320 sets of heavy and precision producing and testing machinery;scientific research development center in the southern China,and various testing facilities.Besides of our 50 years industrial experice and expertise, we also hold close ties with several research institutions and universities in this field in order to maintain advanced technology and to develop new products.More than 20 kinds of our products have been granted national or provincial technical progress and excellent products awards.We fully carry out the ISO9001 quality management system.Our products can meet IEC standard and CE requirements.

Fabricating Machinery


Horizontal Lathe, MC1363 cylindrical grinding machine, B1016A facing machine,Two points closed pressural machine, CQ5250 CNC Double Column Vertical Lathe, CNC Flame Cutting machine, 500T Press machine 500T, VacuumPressure Impregnating, the production line of resin-bonded sand and so on.

 .jpg


Packaging & Shipping

standard export packing, wooden cases, structural steel, seaworthy packing

-1.jpg


Our Services

Usually we guide the installation. We can dispatch engineers to site.(electrical engineer, mechanical engineer, control engineer and a translator according to requirement)

Please send the basic data of your project to us, then we can do the spcial design according to your requirment and quote for you:

1.Water head:___M

2.Water flow:____M3/s

3.Frequency: 50HZ/60HZ

4.Generator outgoing line voltage:__Kv

5.On-grid or Off-grid type? (On-grid type voltage:____Kv)



Product Tags:

hydro turbine

      

kaplan turbine

      

Low Water Head 60kW Micro Kaplan Turbine Genreator 500r / min 1x1.65m³/s Images

Send your message to this supplier
From:
Enter your email please.
To: Fuchun Industry Development Co.,Ltd. Shenzhen
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
Other about

Low Water Head 60kW Micro Kaplan Turbine Genreator 500r / min 1x1.65m³/s