10M / 100M Power Over Ethernet PSE Media Converter Built In AC / DC Power Supply

10M / 100M Power Over Ethernet PSE Media Converter Built In AC / DC Power Supply

Features

-10/100Base-TX UTP to 100Base-FX fiber media convertion
-IEEE802.3af PoE PSE compatible
-9K bytes packet at cut-through mode
-Built-in AC/DC power supply
-Over-current protection
-choice of SC, BiDi or LC connectors for multimode and singlemode
-DIP switch to set different configurations
-LFP (Link Fault Pass-through)

POE-FR200 is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Technical Specifications:

Data Rates:

- 10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
- 100Mbps (100Base-FX)

Input Power Requirements:

- Input voltage ........................... 100 VAC to 240 VAC
- Input frequency ................................. 47 Hz to 63 Hz

Power over Ethernet Output:

- Pin Assignment and Polarity……...4/5 (V+), 7/8 (V-)
- Output Power…..please refer to ordering information
- Efficiency ....................................................75% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery

Environmental Conditions:

- Operating temperature ....................... …0℃ to 50℃
- Cooling ........................................ free air convection
- Storage temperature ...................... -20℃ to +85℃
- Operating Humidity …... 90% max, non-condensing

Mechanical Specifications:

- Case Material………………………………Iron
- Case Color………………………………….Black
- Net Weight…………………….540g approx. / unit
- Dimensions………110(W) x 40(H) x 140(L) (mm)
Do not include transceiver length

Connectors:

- AC Inlet……………………………………IEC-J-4
- LAN……………………………….Shielded RJ-45
- Fiber………………………………see ordering information

Ordering Information:

*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below.

FiberRoad founded in 2008, is committed to developing and manufacturing and selling network communication products. In particular, the focus on fiber optical technologies, Ethernet technologies and the integration of broadband access technologies. With leading-edge technology and high quality service as the driving force, FiberRoad continued steady growth, and become a top global equipment supplier of innovative last-mile access in the telecommunications market.c

Products and Market
FiberRoad products include a broad line of FTTH, Fiber Media Conversion platform, Manageable media converters, Fiber Switch, Industrial Switch, SFP transceivers, components and subsystems, CWDM/DWDM system , Passive products, In addition, we supply analogous products to telecom fixed wavelength, data communications and cable TV markets.

As our professional engineering team have devoted ourselves to the R&D for a long time, so that the products have been quiet mature. We have received much popular recognition from our current Telecom operators, Telecom engineering contractors, and Solution Partners in the world. This alliance covers Europe, Asia, the Middle East, Africa, plus North and South America. This global partnership receives direct engineering and technical support from our company headquarters in Shenzhen.

As services such as voice and multimedia are moving to IP based technologies, carriershave found that their core networks can be operated more effectively and economically if the public switching networks are migrated to a next generation IP based networks. This proactive thinking will allow FiberRoad to continue developing IP Camera solutions for today and tomorrow's markets.

FiberRoad Values
FiberRoad’s continuing mission is to provide our customers with "on time" solutions, quick and effective customer support, and valuable products with extended service life.

Providing innovative last-mile access solutions in telecommunication market

Providing customers with “on time” solutions, quick and effective customer support, and valuable