Automatical Carton Making Machine with 1400-2500mm Width , 100m/min Speed

Automatic Corrugated sheet Production Line 1400-2500mm Width High Speed

Item:WJ100-2000 5-layer Corrugated Cardboard Production Line

1,Design speed:100m/min

2,Economic speed:80m/min

3,Working width:2000mm

4,production line length: about 70m (exact length according to the ground drawing)

Main part technical:

1.Upper corrugated roller: ￠278mm lower corrugated roller: ￠280mm Origin: Beijing

2.Pressure roller: ￠292mm, #45seamless steel pipe with quenching treatment

3. Applicator glue roller: ￠240mm 45# seamless steel pipe, from Chengdu

surface are treated by special mesh netting and chrome plated

4.Doctor glue roller: ￠120mm, 20# seamless steel pipe, from Chengdu

5.Pre-heating roller : ￠265mm 20G steel from Jinan Steel Wall thickness:20mm

Note: The roll paper which is used to test the production speed should meet following requirements:

*Grade: Min. B * Moisture content:11% ± 1%

*Face paper: 90~120g/ m² * Liner paper:110~120g/ m²

*Corrugated paper: 105~180g/ m²

5,Flute profiles: A, B, or according to client`s requirements

6,Steam requirements:

Steam quantity: 4000Kg/Hr Max. pressure: 1.13Mpa

Normal pressure: 0.98－1.12MPa

7,Electricity: 380V 50Hz three-phase, or four phase

8,the whole power:180KW machine prime power :120KW (working power)

9,Shop area that machinery requires: About 70m×8.2m×4.5m(length x width x height)

10,Equipment Direction:Left or Right transmission will be according to client`s requirements.

Note: Customer`s self –provided parts

Steam heating system: one set of boiler of 4000Kg/Hr, pressure 0.98－1.13MPa

Steam pipelines above valves and steam back, water drainage pipelines

2,Compressed air pipelines, glue pipelines3,Power, electrical wire to operation box

4,Water pipelines, water barrel

5,Water, electricity, steam ground foundation

6,Raw material ( paper roll, corn starch, caustic soda, sodium borax) to test machinery

7,Engine oil, lubricating oil, hydraulic oil, lubricating and high-resisting lubricating

8,Installation and commissioning persons accommodation, and person arrangement

SF-280S Single Facer

Technical specification:

Working width: max 1800mm, min: 900mm

Design max speed: 120m/min

Working pressure: 0.6-0.9Mpa Steam work pressure: 0.9-1.3Mpa

Steam consumption: 0.5-0.8t/h Temperature requirements: 160-200℃

Machine power: 26.2kw

Working power: 380V, 50Hz

Dimension: 3200mm*1900mm*1800mm

Structure characteristic:

1.Cardboard transmitting method adopts wind absorption, and keep flute profiles stable under the running condition of high speed.

2. The wind machine absorbs corrugated paper to corrugated rollers through vacuum box and form corrugated profile.

3. The width of wind groove of lower roller is not exceeding 2mm,and will less fringe marks of single corrugated paperboard.

4.Transmission part adopt gimbal transmission, away from vibration source, and make the transmission more steady and reliable, and easy to maintain.

5. The speed reducing box is oil-lubricating, close gear transmission, and will reduce machine vibration.

6. Upper corrugated roller surface are treated by special mesh snicked and chrome plated.

7.Upper-lower corrugated roller are made of high quality 48CrMo alloy steel, and after heat-treatment, the rigidity is HRC 55-62, the surface are grinded and plated chrome.

8.Flute profiles: A flute heigh:4.7mm B flute heigh : 2.65mm E flute heigh1.5mm

(the flute profiles can be made according to client’s requirements)

Main bought-in parts, raw materials and origin:

1.. Wall plate two sides and seat materials: HT250 Origin : Hebei

2.. The seat materials of transmitting unit: welded with channel steel

3. Rotary joints, metal soft tube: Lu Guan Qiu

4. Common bearing: Wa, Ha, Luo, bearing with seat: Deyuan, Fujian (Chinese best product)

5. Motor: Main motor: 15KW 1set continuous working

Wind absorption machine: 11KW 1 set continuous working

6. Electrical appliances: Chint, China

r. Pneumatic parts: Airtac, Taiwan

CangZhou Xin-Tian Packing Machinery Co., ltd is a specialized incorporation that deals with the design and production of carton machinesand is the first one being created in the North carton machinery base in DongGuang. More than twenty years since its creation, the incrop oration is in the leading position in research, production and exploitation.The higher staffs of the incorporation listen carefully and adopt the suggestions and advices from dlients in using the national and international advanced techniques and experiences, and lay stress on the less cost, higher effciency and ecnomical and practical characteristics of products.At present, the incorportion produces various grade products the middle and high speed water-ink printing and slotting machines, to satisfy the needs of different clients.For years, our products sell well and are welcome in China, and a large amount of products have been exported to South-Korea, Russia and South-Eastern Asian countries.The Cardboard Machinery Research Institute has been established as a joint research institution of The Xin-Tian Cardboard Machinery Incorporation and HEBEI Industrial Technology University with the most advanced technology to exploit and produce the intellectual and high efficient modern technical products.

Production Shop

Our Factory's have CNC (8 pcs) ,milling ,drilling,pulse and other procesing machinery to insure produced high quality,precision spare part for our machines.

Wallboard:

We used CAST STEEL not Nodular cast steel.Shrinkage and dispersed shrinkage are not exist in cast stell but has too much in nodular cast steel. Cast stell is expensive than nodular cast steel but tough,dectile and easily machined.Even you cant see the steel's material after painting,but we used good cast steel ,to producted high quality machine is my factory's aim.That's why the machine have been using more than 20 year no problem.

Accessories

We used famous brand accessories for our machinese.

Ceritifaction

Loading

In Exhibition

Service

WHY CHOOSE US:

1.Many years expertise and professional experience in designing and manufacturing.

2.Design and customized according to customers’ requirements.

3.High levels of performance,quality and reliability of all equipments and services.

4.Reliable quality proven by customers both at home and abroad.

5.Reasonable prices without compromising any products efficiency.

6.Promptness in both equipment delivery and technical support pre-and after sales.

7, we have a professional group , every department have the professional work .