1, The upper and down conveyor clamping the cardboard to move
forward, the cardboard inlet interval, as well as upper and down
conveyor interval all adjusted electrically.
2, Paper entering section adopts spring pressure wheel to load
cardboard, limit device is equipped in the pressure wheel, and the
interval between the wheel and down conveyor can be adjusted
independently, make sure high paper feeding precision.
3, The middle part is equipped with secondary ballast device, make
sure the folding precision.
4, The back part adopts vaccum suction belt to convey cardboard, in
case the cardboard slide away and two folding parts are not joint
5,The back part is equipped with down folding belt, whose speed is
faster than the upper folding belt, the friction of the down belt
movement will offset the resistance produced by folding cardboard,
to reduce problem that the two folding parts of the cardboard are
not joint together completely.
6, The back part adopts rounder tower forming folding method, make
the cardboard folding precision well controlled and the forming
carton box with good shape.
7, The movement of the crossbeam adjusted by electrically.
1, Main motor adopts variable frequency motor, synchronized with
the flexo printer.
2, American Gates Timing Belt is used, with high transmission
precision and low noisy.
3, Strong wind pressure device prevents the forming carton box
upturned, and the wind direction can be adjusted, make sure staking
4, High speed shaping and flapping device do the last revise to the
forming carton box.
Count and discharge part:
1, Photoelectric switch counting, three units servo motors
cooperated to make sure the precise counting under high speed
running, accurate and reliable batch with little impact.
2, Pneumatic paper pushing structure to push out the counted carton
3, Back baffle can be adjusted electrically as per the cardboard
4, Moving parts adopts imported ball screw and linear guides with
5, Equipped with paper pressure device, upper and down transmission
is the same speed ensures carton box neatly, the height can be
adjusted electrically as per the different quantity of each pack of
the carton box.
6, The left and right position of the discharge part can be
adjusted, which ensures the carton box always falling down to the
middle part of the machine.
Mechanical speed: 300 pieces/min(as per specific condition)
Main motor power: 18.5KW
Glue method: gluing
Machine length: 11.5m