Rack Mounted UPS C1-3K Led Rack UPS

Introduction

C Series UPS is an uninterruptible power supply incorporating double-converter, Single-phase input and Single-phase output. With high efficiency and reliability , it provides user’s equipment with safe, high-quality alternating current. Designed with the small dimension, this series of UPS is convenient for

operation, especially fit for the basic equipments in some areas as: finance , communication,

government, traffic, manufacture, education and so on.

FEATURES

Ø Digital Design

Adopted DSP control technology and digital design topology, C UPS can be operated and maintained more

conveniently.

Ø Reversed Polarity N and L wire Detection Function.

Reversed Polarity of wiring or input protective grounding-wire is abnormal, at this point the indicators will alarm blink cyclically.

Ø A Real Green-environmental Protection Power.

The commercial power input factor correction technique is used .Under the Normal mode, UPS achieves

real energy-saving by inputting harmonic less than 10% and frequency power factor above 99%.

Ø Direct Current Cold Start Function

When battery input voltage in the range of normal voltage. By pressing the ON button , UPS can start up

normally.

Ø Alarm High-low Battery Input Voltage Protection Function

UPS alarms in case of the battery input voltage too high or too low. As the battery continuously go up or

down out of the normal range, UPS will alarm and stop input or transfer to bypass mode to ensure the

battery life and protect user equipment

Ø Communication and Monitoring Function

Equipped with standard RS232 interface and intelligent slot. The UPS Operating and electrical parameters

can be monitored through standard RS232. Through intelligent slot status interface the intelligent control

can be flexibly configured according to different applications to users, for instance , stem node, network

monitoring, text message

Ø Output High- Low Voltage Protection

When UPS output is greater than the output over-voltage protection point or less than the output low-voltage protection point, it will shut off inverter output to bypass and automatically alarm .After all the fault

removed, users can restart the machine normally.

Ø Output Short Circuit Protection

When the Inverter output overloaded and short circuit , UPS will stop output and alarm and blink continuously.

After the troubleshooting, it can restart normally.

Ø Overloaded Protection Function

When Overload out of ranged load in certain time , UPS will turn off the inverter and switch to Bypass output

by alarming .After the load back to normal, UPS automatically transfer back to inverter output.

Ø Over-temperature Protection

When the temperature is over high or the fan work abnormally, it will lead the main radiator

temperature out of over temperature protection. At that point UPS will alarm and switch to Bypass output .

Until the temperature recover normally, UPS will automatically switch to inverter output

Ø Intelligent Fan Speed Control Function

According to load capability and environmental temperature, the fan speed adjustment can reduce the

noise and prolong the service life

SPECTATIONS