VAG Commander 8.6 Compatible VVDi

Product Name: VAG Commander 8.6 Compatible VVDi
Part No.: B119
Net Weight: 0.15KG


VVDI Introduction:
VVDI is the acronym of VAG Vehicle Diagnostic Interface, which is a universal diagnostic interface developed by Chinese, not totally 100% cloned hardware product. The communications instruct is compatible with AVDI diagnostic interface. Besides being able to use the VAG IMMOPLUS software come with, it also supports the VAG COMMANDER8.6 software, 2 in 1 product. To use the two software at the same time, the function is more superior than any of the two softwares to resolve problems from users more efficiently. By using VAG IMMOPLUS software, VVDI can support more dashboards of CDC32XX and the latest NEC24C64, Golf 6 MM7 dashboard, IMMO function. Via continuous updating and development, the VVDI will support more vehicles and the update is free charge in one year. VVDI latest update

Update on 2011-5-20
1. added Bora 1.4T NEC24C32 dashboard;
2. support calibration for Q7, A6l after 2009 odometer;

Update on 2011-5-13
1. Added log algorithm of foreign NE24C32 with key. Via OBDII (OBD2) interface it could modify Kilometer, make dealer's key, Read/write EEPROM, back up FLASH;
2. Newer update supports nec 24c64; Via OBDII (OBD2) interface it could modify KM, make dealer's key, Read/write EEPROM, back up FLASH;
3. Newer update supports CDC32XX; Via OBDII (OBD2) interface it could modify KM, make dealer's key, Read/write EEPROM, backup FLASH; resolving the problem that some of Jetta 2009 are not supported

Update on 2011-5-6
1. Passst B6 (Magotan) extracts password from med17.5.x engine, also could make key (need update the firmware).
2. Modify the BUG function to make TA special chip.
3. Add new function to make TP chip.

Update on 2011-4-30
1. Newer updated version supports NEC 24c32 to modify odometer, make dealer’s key, read/write EPPROM and make FALSH backup via OBDII;
2. It also supports GOLF6 MM7(9S12) modify odometer, make dealer’s key, read/write EPPROM and make FALSH backup via OBDII;
3. It adds the pre-programmed function of TA special chip, which could pre-grogram the chip 48 to TA2, TA3, TA4, TA5 directly;

VAG IMMO PLUS
1. Support modify Kilometer, make key, read / write EEPROM and read/ write FLASH for CDC32XX 2006;
(Has more HASH Keyes, more algorithms, support more vehicles than vag commanderl. If you have some dashboard which it does not support, please get the FLASH and EPPROM data to us via XPROG to help us updating in next generation.);
2. Support modify Kilometer, make key, read / write EPPROM and read / write FLASH for NEC23C32 2008;
3. Support modify Kilometer, make key, read / write EPPROM and read / write FLASH for NEC23C64 2010;
4. Support modify Kilometer, make key, read / write EPPROM and read / write FLASH for Golf 6 MM7;
5. Support make TP series chips: tp22, tp23, tp24, tp25;
6. Support make TA seies chips: ta2, ta3, ta4, ta5;

Software interface display:

VAG VAG COMMANDER 8.6 LICENSE
1 AN002 - KM-CAN
1 AN003 - PIN-CAN
1 AN004 - IMMO panel
1 AN005 - IMMO panel EDC16
1 AN006 - KM/PIN K-Line
1 AN008 - Flash Counters
1 AN009 - Key learning
1 AN010 - Airbag EEPROM
1 AN011 - TV Activation
1 AN012A- EDC16 Odometer
1 AN012B- EDC16 EEP/PIN/IMMO-off
1 AN014 - EDC17 EEPROM
1 AN015 - Flash Memory ECU
1 AN016 - Dealer key learning
1 AN018 - Dealer key learning Q7
1 AN019 - Prepare Dealer Key Q7
1 AN021 - ME7 EEPROM by CAN
1 AN022 - CDC32xx Programmer
1 AN027 - Q7 2008

Update steps:
1. Launch COMMANDER UPDATE 1.3 software, click [read SN] button to read serial number (about 1 minute to get the S/N).
2. Send us the S/N, we will supply the latest firmware and software to you.
3. Launch COMMANDER UPDATE 1.3 software, click [read SN] button to read serial number, then click [UPDATE] button to select the latest firmware, and click “Yes” to start updating.
4. After you get it updated, it will give “update ok”attention.