HUATEC 320kV Ndt X Ray Pipeline Crawlers

HUATEC HDR-01 DR Ndt X Ray Equipment Ndt Pipeline X-Ray Crawler Pipeline Crawler X-Ray Machine

1. Overview

With the continuous development of science and technology, testing equipment is constantly updated. Our company closely follows the technological development of advanced countries in the world, and through its own efforts, has developed a new HDR-01 digital crawler imaging detection system.

The system can visually present the inspection results of pipeline welds in the computer in real time, and is helpful for operators to judge the inspection results on site. At the same time, the on-site test results can be retrieved remotely, saved for record, or the results can be directly verified by experts. The system can directly print the position and location information of the site, the time, the welding port number of the work site, and some related information on the image without modification, completely avoiding the suspect of cheating.

The system is composed of the following parts: remote PC, DR imaging board trolley, external radiographing machine trolley, internal shooting pipeline crawler and other systems. Through the wireless local area network, the control and acquisition (transmission) of the map can be completed at one time. The staff can remotely control the computer to complete the inspection of the pipeline weld and save the original image for retrieval and flat film. The image of the system is clear, and the double-wire evaluation fully meets and exceeds the requirements of national standards.

2. Composition of equipment

The system is composed of two parts: in-pipe shooting equipment and outside shooting equipment.

Internal shooting equipment composition:

High-frequency X-ray pipeline crawler, pipeline outer wall crawler (carrying flat panel detector, central router, lower computer PLC), DR flat panel detector, PC workstation (digital image acquisition and processing software).

Outdoor shooting equipment composition:

Pipeline outer wall climbing car (carrying flat panel detector, central router, IP10 lower computer PLC), DR flat panel detector, pipeline outer wall climbing car (directional high frequency X-ray generator, auxiliary router, IP11 lower computer PLC), portable high frequency control Adapter, data cable, power cord, PC workstation (digital image acquisition and processing software), PC workstation (digital image acquisition and processing software).

3. Technical indicators of corresponding equipment

3.1 Image acquisition device:

Climbing car on the outer wall of pipeline (carrying image acquisition board)

Model: PC10

 Walking speed: ≥100mm/s

 The walking method adopts the track type to ensure the positioning perpendicular to the welding seam: ±1mm, and the positioning accuracy of the walking direction: ±1mm;

 It can meet the requirements of central transillumination and double-wall single shadow DR detection of pipelines with a diameter of less than 1600mm;

 Adopt 5G dual-frequency wireless communication system, control distance: 100 meters (open field);

 It is powered by 36V integrated low-temperature lithium battery, which is easy to replace and can work normally at minus 40°C;

 Working time: more than 8 hours (working time more than 10 hours when connected to the external wall climbing car power supply system);

 Power consumption: ≤150W;

3.2 Climbing the outer wall of the pipeline (carrying X-ray machine)

Model: PC11

Walking speed: ≥100mm/s

 The walking method adopts the track type to ensure the positioning perpendicular to the welding seam: ±1mm, and the positioning accuracy of the walking direction: ±1mm;

 It can meet the driving requirements of the double-wall single-shadow directional ray machine for pipes with a diameter of 711mm or less

 Adopt 5G dual-frequency wireless communication system, control distance: 100 meters (open field);

 It is powered by 36V integrated low-temperature lithium battery, which is easy to replace and can work normally at minus 40°C;

 Working time: more than 10 hours;

 Power consumption: ≤150W;

Synchronously drive with the climbing car (image acquisition board) outside the pipe wall to complete the double-wall single-shadow DR transillumination inspection requirements.

3.3 Flat panel detector (the flat panel is selected according to user requirements, the price is different)

 X-ray conversion layer: amorphous silicon;

 Scintillator: CSI;

 Pixel pitch: 120μm;

 Effective imaging area of the detector: 150×180mm;

 Pixel matrix: 1280×1024;

 AD conversion: 6bt;

 Line pair resolution: ≥4.0LP/mm;

DQE@0.0LP/mm (2.5μGy, RQA5): 65%;

MTF@1.0LP/mm: 0.66;

MTF@2.0LP/mm: 0.35;

 Minimum detection dose: 14nGy;

 Ray energy (static KV value): 40~300kv;

 Ambient temperature range: 5~35℃;

 Relative humidity range: 10~75%PH;

 Rated power: 20W;

 Received ray energy: 320kV;

 Continuous working time: more than 10 hours;

 Power supply: DC 24V;

 Battery: Built-in battery 1 fast;

 Weight: 3kg;

 Wireless data transmission protocol: 802.11ac.

3.4 Digital image acquisition and processing software

With one-key inspection function, the operator selects the pipe diameter and wall thickness according to the pipeline parameters preset in the software database, and enters the weld number of the inspected weld. The system automatically selects the preset parameters and automatically completes the entire weld. Detection and storage. The software has the function of manual intervention, which can adjust the detection speed, increase or decrease the detection speed, and adjust the detection step length (detection times) according to needs.

 The operator can preset the window width and window position before the test, so that the brightness and contrast of the collected images are consistent, and can be directly evaluated after the collection is completed.

 With positive and negative image inversion, image inversion and rotation, image enlargement and roaming, image interpolation edge enhancement, partial enlargement/restoration of the original image, alphanumeric labeling, image marking.

 With ruler line segment measurement.

 With defect measurement (geometric measurement of points, lines, angles, etc.) and defect marking functions.

 With MFT double-filament image quality meter (spatial resolution) automatic measurement and calculation function.

 Real-time display of gray value, automatic calculation and display of average value.

 With normalized signal-to-noise ratio (SNR) measurement and calculation function.

 The senior operator can compile and modify the transillumination process files in real time, and the operator can view the current image transillumination process parameters and output at any time.

 Has the function of welding seam image stitching.

 The image is in DICONDE format and can be converted into other common formats such as JPG. It also supports image storage in various formats such as DCN, BMP, RAW, and TF.

3.5 Workstation

Technical parameters of image acquisition and analysis workstation:

Device model: Dell Precision 3530

Equipment Brand: Dell

 Genuine WINDOWS10 operating system

 Intel(R) Corc(TM)i7-8750H processor-CPU frequency (MHz) 6 cores, 9M, 2.20 GHz, 4.1 GHz, Intel mobile CM246 chipset;

 VGA controller adopts NVDIA GeForce950M4GB chipset;

 Memory (RAM): 16~32GB (DDR4 2666MHZ);

 SATA hard disk: 512GB (solid state) + 2TB (mechanical);

 Graphics chip: NvidiaQuadro P600+HD630, with 4 GB GDDR5 independent;

 15.6" FHD WVA, 1920x1080, anti-glare non-touch, 72% color gamut, camera and microphone, no WWAN support;

 Weight: 2.21kg;

 Palm rest: dual-pointing palm rest without security chip + Thunderbolt;

 Wireless network: Intel® dual-band wireless AC 9560, 802.11ac, MU-MIMO dual-band 2x2 + Bluetooth 5.0;

 With: smart card reader, HDMI interface, USB3.0 interface;

 Power supply: 130W AC adapter, 7.4mm Barrel;

 Fully sealed case design: The protection level has passed P65 certification, which can prevent sand, dust and liquid from entering;

3.6 Equipment name: portable high-frequency constant-voltage X-ray flaw detector and control system

Model: XXG-300GP

 Operating environment temperature: -20℃~50℃

 Operating environment humidity: ≤85%

 Input voltage range: AC190v~AC265v

 Input voltage frequency range: 50HZ~60HZ

 7-inch large LCD screen Chinese menu display

 X-ray tube: Cermet tube

 X-ray tube power supply mode: constant voltage

 X - ray tube voltage adjustment range: 120-300kV

 Tube voltage adjustment step: 1kv/step

 X - ray tube current: 0.5-3.0mA

 Tube current adjustment step: 0.1 mA/step

 Maximum exposure time setting: 0.1~60min (accurate to 0.1min)

 Maximum power of X - ray tube: 900W

 Working frequency: 100kHz

 Focus size: 3.0mm EN12543 standard

 Penetration thickness: 70mm (focal length 600mm, exposure time 20 minutes, blackness 2.0D)

 Temporary load rate: 100% (when the ambient temperature is 20℃, the maximum power condition)

 Radiation angle: 40°×55°

 Additional filter: 4 mm aluminum equivalent

 Tube head size: Φ295×752 (including end ring)

 Weight of tube head: 30kg

 Connecting cable: 25m

 Power cable: 10m

 Controller size: 410×228×300(mm)

 Controller weight: 11kg

 Anode cooling method: forced air cooling

3.7 Rail:

Specification: φ711mm

3.8 Equipment configuration list:

Established in year 2000,HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified competitive products and service to international markets.

HUATEC Group products are composed of all kinds of metal and non-metal testing equipments, such as portable hardness tester, micro hardness tester, shore durometer, vickers hardness tester, Rockwell hardness tester, Brinell hardness tester, portable X-ray flaw detector, mobile X-ray flaw detector, Real-time X-ray image flaw system, holiday detector, digital portable eddy current electrical conductivity meter, digital ultrasonic flaw detector, coating/painting thickness gauge, ultrasonic thickness gauge, vibration tester, surface roughness tester, profile projector, etc, and all of their accessories such as ultrasonic transducer, test block, IQI, lead screen, densimeter, film viewer etc.

HUATEC Group employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

HUATEC Group, based on most advanced technology in China, is an China famous industry group, focus on development & research and precision production of various testing equipment. The group has two own factories and two sister factories located in area of Beijing, Liaoning, Shandong and Guangzhou. All the products are produced following ISO9001 regulations and the products have been exported to most of world markets in passed years.

Our promise: Reliable quality, competitive price, fast delivery, satisfactory service.