Mobile Tire Killer SP650 Automatic Under Vehicle Inspection System For Gate Security
Brand Name:SECUPLUS
Certification:CE ROHS FCC
Model Number:SPT650
Minimum Order Quantity:1 set
Delivery Time:7 working days after got your payment
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
6F, Quewei Building A, Pinghu Street, Longgang District, Shenzhen, China
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Mobile Tire Killer SP650 Under Vehicle Surveillance System for gate security
Introduction:
SP650 Portable deceleration slope type roadblock, also known as tyre killer. It belongs to the electromechanical integrated remote control to intercept the car.
The roadblock uses more than 100 hollow stainless-steel needles to directly pierce the tires of unauthorized vehicles.
The size of the spike barrier collection can be put into the trunk of the trolley. When it is needed, the spike barrier can be opened in the traffic lane.
The user can remote control the spike rising within 200 meters.
To prevent the vehicle can’t continue driving after the tire has been deflated.
The effective length can be produced to 5-16 meters according to the user's requirements.
Technical Specification :
| Items | Specs |
| Function | Digital display work, wireless remote control start and close studs |
| Effective Interception Distance | 6-15meters(in options) |
| Puncture Tire Thickness | ≤35mm |
| Max weight capacity | 20T |
| Remote control speed | ≤ 1 time / sec |
| Remote control distance | 45meters (Empty zone) |
| Spike Barrier Weight | 16 kgs |
| Standard Spike Barrier Size | 6000(L)*240(W)*30(H)mm |
| Working Voltage | 12V |
| Venting Hollow Steel Needle Size | φ5mm×43mm |
| Packing box size | 630(L)*610(W)*280(H)mm |
| Gross weight(6m) | 34 kgs |
Using Instruction:
1. Before using, ensure that the battery in the remote control box
is charged for a sufficient time to keep the voltage of the power
supply between 11V and 13.5V. 2. Open the right side cover of the
roadblock box, roll out the roadblock roll, remove the elastic hook
for fixing the roadblock, lean on the side of the roadside, and
roll to the road to intercept the vehicle. 3. Connect the wiring
between the remote control box and the roadblock. Insert one end of
the two-meter three-core connection cable into the roadblock
connection jack and the other end into the three-core connection
jack of the remote control box. 4. Open the top cover of the remote
control box, pull the power switch to the built-in power supply,
the power indicator light is on, the device enters the working
state, and the left receiving antenna is pulled out to increase the
receiving distance. 5. When it is necessary to perform the task of
intercepting the suspect vehicle, press the large button on remote
control key, and the stainless steel hollow needle in the roadblock
is automatically erected. At this time, if the roadblock is
forcibly passed, the wheel will be pierced into several stainless
steel hollow needles. The tire deflated immediately within two
seconds and could not continue driving. 6. After the interception
task is finished, press the small button on the remote control key,
and the stainless steel hollow needle that is erected will rotate
back to the original position and enter the standby state. 7.
Recycling of the remote control roadblock, after the roadblock is
rounded, fix the roadblock with the elastic hook strap, turn off
the remote control box power switch, and put the remote control box
into the middle of the roadblock, and hold the roadblock in the
left hand, right hand rolling barrier block into the box, put in
the connection cable and buckle the cover. 8. The remote control
roadblock is also equipped with an external power connection. When
the power supply voltage in the remote control box is insufficient
and cannot work normally, one end of the 15M connection cable can
be inserted into the
external power connection jack of the remote control box, and the other end is inserted into the 12V car point. To the cigarette lighter jack, pull the power switch of the remote control box to the external power supply position, and the operation is the same as the above.
9, work indicator
(1) Power indicator light - When the remote roadblock needs to perform the interception task, turn on the power switch in the remote control box, and the power indicator light is on.
(2) Undervoltage indicator light——When the undervoltage of the power supply in the remote control box is lower than 11V, the undervoltage indicator light is on, and it needs to be charged at this time. The charging indicator lights up when charging, and the charging time is 8-12 hours.
(3) When the red work light remote control stop road barrier is in the working state of interception, the two red indications above the remote control box are on, the interception task ends, the power is turned off, and the indicator light stops working.
Related Products:
Under Vehicle Inspection System SPV3300:
Under vehicle surveillance system mainly adopt to inspect the beneath part of a variety of vehicles.
It can quickly and accurately identify threats/ contraband/ smuggling of persons hiding at the bottom.
UVSS greatly improved vehicle safety inspection speed and accuracy, reduce investment in human resources.
Mobile Tire Killer SP650 Automatic Under Vehicle Inspection System For Gate Security
Inquiry Cart
0