High Efficiency 5000m Detection Distance Radio Technology UAV Scanning and Jamming System

EST-GSM DCS Dual band Mobile Phone Signal Repeater/Amplifier/Booster

High Efficiency 5000m Detection Distance Radio Technology UAV Scanning and Jamming System

1. System Characteristics

1．Integrated detection and interference, smaller, lighter;
2．Passive passive detection, 360° omni-directional, 50 MHz-6GHz ultra-wide spectrum detection range;
3．With the ability of independent learning to identify unknown UAV, can record its signal characteristics in UAV flight, including standard broadband map transmission and frequency jump map transmission of industrial UAV, consumer UAV, patent design, the world's first;
4．AOA single-station identification and positioning UAV;
5．It can handle more than 10 targets at the same time to detect and identify the positioning and interference;
6．All-day, all-weather, unattended;
7．Multi-antenna array design, suitable for the city's particularly complex electromagnetic environment, suburban environment detection up to 5000M;
8．Open the UAV signal feature recording, for the new UAV, the model can be identified after recording;
9．With the whitelist function;
10．Unique intelligent gain and reference level patent design, to meet the needs of complex electromagnetic environment detection;
11．Directional countermeasures, do not cause too much impact on other communication, high efficiency, low RF power;
Special frequency hopping signal recognition technology can distinguish multiple remote controls and industrial frequency hopping UAV;

2. System Parameter

The main technical parameters of the UAV detection and jamming system are shown in the following table:

3. System Deployment

6.1 Single-station System Deployment
The UAV detection and countermeasures system can complete the 360° range of omnidirectional scanning and directional interference alone, and build an all-weather UAV no-fly zone. You can roughly obtain the location and distance information of the UAV by single station deployment. The deployment diagram of the single station system is as follows:

6.2 Multi-station Network Deployment
The deployment of multiple stations (2 stations) can give the location of the UAV through cross-positioning mode. Each site can perform both a routine signal monitoring task and an AOA cross-localization. AOA cross-mapping is a method of orientation crossing for mapping. By measuring the position determination of the two direction crossing, we can track the UAV flight information in real time in the area where the source is located. During unattended work, different stations can strike a single target at the same time, and the strike efficiency is higher. The multi-station network deployment schematic diagram is as follows:

Estlonda founded in 2003, its predecessor was Longhua Estlonda Electronics Factory in Baoan District, Shenzhen. It’s a national high-tech enterprise which is engaged in the research and development, production and sales of wireless communication equipment. We are also the strategic partner in the field of 5G private network and 5G multi-functional smart pole wireless communication for State Information Center (National E-Government External Network Management Center). Also as a certified enterprise by the Ministry of Industry and Information Technology and the National Radio Commission, and the vice president company of Guangdong High-Tech Industry Chamber, Emergency Governance Society of Shenzhen and Shenzhen Smart Street Light Association.

We are mainly focused on the R&D and manufacturing of 5G mobile phone signal jammers, 5G base station, 5G gateways, 5G core network, 5G private network, 5G public network blind filling and other communication equipment, as well as a 5G multifunctional smart pole solution provider. As the first and largest manufacturer in China to produce mobile phone signal jammers, we are with a market share more than 80%. The Chinese headquarters is located in Longhua District, Shenzhen, and the foreign headquarters is in Hannover, Germany. There are two R&D centers in Nanshan, Shenzhen and Nanjing, Jiangsu. Our R&D team is mainly composed of outstanding R&D personnel in communications from Silicon Valley in the United States and major semiconductor universities in Belgium.

With 5G technology and product research and development as the core, and relies on the 5G+ multifunctional smart pole industry foundation to build smart cities, smart campuses, smart parks, smart scenic spots, smart emergency, smart roads, smart ports, smart mines, smart ports, smart factories, smart terminals, and etc., we provide research and development, production of 5G core network, 5G base station, 5G gateway and other private network communication equipment, and 5G global private network solutions, provide 5G private network services for digital factories, digital parks, digital governments, and digital China, to solve the communication and interconnection problems in various places without communication methods and network signals.

As a leading wireless communication equipment manufacturer and solution provider, our products and solutions have been widely used in schools, prisons, troops, conferences, confidentiality, enterprises, finance, electricity, coal mines, public security, hospitals, ports, government agencies, transportation systems and other fields, in the same track with Huawei and ZTE. It has participated in the formulation of national standards many times, obtained a number of patents and soft works, and has passed the ISO9001 international quality management system. It is a qualified supplier of China Mobile Communications.

In addition to in-depth cooperation with China's four major carriers, central enterprises, and state-owned enterprises, we also participates in the testing and construction of 5G public networks of telecom operators in Hong Kong Telecom, Brunei, Palau, Southeast Asia and other countries. In the future, we will also cooperate with partners to participate in overseas operators testing and construction of 5G communication network.