Double Clamp Digital Phase Meter VICTOR 4000
Brand Name:Made in China
Model Number:VICTOR 4000
Minimum Order Quantity:1 Piece/Pieces
Delivery Time:Within 4 weeks
Payment Terms:T/T
Place of Origin:Guangdong, China (Mainland)
Contact Now
Add to Cart
Active Member
Location:
Beijing Beijing
Business type:
Distributor/Wholesaler Agent
Address:
Room 1212, Unit A, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District,Beijing,100025,P.R.C
Supplier`s last login times:
within 14 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
1.LCD display, blue backlight, suitable for dark places
2.Automatic Shutdown
3.Press HOLD key to keep data
Technical Specification
1.Base Conditions and Working Conditions
Influence Quantity | Base Condition | Working Conditions | Remark |
Ambient Temp | 23°C±1°C | -10°C~40°C | |
Ambient Humidity | 40%~60% | <80% | |
Signal Waveform | sine wave | sine wave | β=0.05 |
Signal Frequency | 50HZ±1HZ | 45HZ~65HZ | |
Meter Working Volt | 9V±0.1V | 9V±1V | |
External Electric, Magnetic Field | To be avoided | ||
Measured Wire Position | Measured wire at approximately the geometric center of the clamp | ||
2.General Specification
Function | Phase, AC current, AC voltage, AC leakage current, direct test of phase sequence; transformer groups, inductive, capacitive circuit discrimination; indirect test of power factor and power |
Power | DC9V alkaline batteries(1.5V AA×6) |
Consumption | About 35mA at most with enabled backlight, battery working continuously for about 40 hours |
-3- About 5mA with disabled backlight, battery working continuously for about 300 hours | |
Display Mode | LCD display, blue backlight, suitable for dark places |
LCD Size | 70mm×62mm |
LCD Display Field | 64mm×54mm |
Meter Size | Length, Width, Height:196mm×92mm×54mm |
Clamp Size | φ7.5mm×13mm |
Sampling Rate | About 3 times/second |
Measurement Range | AC Voltage:0~20V/200V/500V |
AC Current:0~200mA/2A/10A | |
Phase:0~360° | |
Measured Signal Amplitude in Phase Test | U1-U2 phase test:30V~500V |
I1-I2 phase test:10mA~10.00A | |
U1-I2 or I1-U2 phase test:10V~500V, 10mA~10.00A | |
Data Hold | Press HOLD key to keep data, "DH" symbol appears |
Automatic Shutdown | Automatic shutdown about 15 minutes later after launching to reduce battery consumption |
Voltage Detection | Low battery symbol “ " appears to remind the replacement of battery when the battery voltage drops below 7.8V~8V. |
Weight | Main Unit about 550g(with battery), clamp about 170g×2, test line about 250g |
Test Line Length | 1.5m |
Current Clamp Length | 2m |
Working Temperature and Humidity | -10°C~40°C;below 80%Rh |
Storage Temperature and Humidity | -10°C~60°C; below 70%Rh |
Input Impedance | Input impedance for all test voltage range:2MΩ |
Input impedance when testing U1U2 phase:40KΩ | |
Withstand Voltage | Withstand 1000V/50Hz sine wave AC voltage for 1 minute between the meter lines and shell; Withstand 500V/50Hz AC voltage sine wave for 1 minute between the two voltage inputs |
Insulation | ≥10MΩ between meter lines and shell or between the two voltage inputs |
Structure | -4- Double insulation |
3.Intrinsic error and performance indicators under base conditions
Category | Measurement Range | Resolution | Intrinsic Error |
Voltage | 20V | 0.01V | ±(1.2%rdg+2dgt) |
200V | 0.1V | ||
500V | 1V | ||
Current | 200mA | 0.1mA | ±(1.0%rdg+2dgt) |
2A | 1mA | ||
10A | 10mA | ||
Phase | 0~360° | 1° | ±3° |
Double Clamp Digital Phase Meter VICTOR 4000
Inquiry Cart
0